TFT35 E3 V3.0.1 paired with SKR Mini E3 V3 board

[kenjesse]

Has anyone had success with this pairing and if so can you share your Klipper Display configuration? So far after 1st flashing NoTouchFirmware "BIGTREE_TFT35_V3_0_E3.26" got stuck at a screen indicating additional files were needed and to insert an SD that contained them. I was unable to complete the process. Flashed the current BTT "BIGTREE_GD_TFT35_V3.0_E3.27" firmware to get back to the beginning, which worked. Now whenever I try to flash the NoTouchFirmware it only runs the "configuration" but does not flash the firmware.

Any suggestions will be greatly appreciated.

kenjesse

[kenjesse]

Its me again... another day of researching and trying and a little wiser. Seems I do have the GD variant (GD32F205 per the marking on the cpu) of the TFT35 E3 V3.0.1. Did not even notice the GD in the bin file I used above if I'm being honest. The lack of the GD as part of the bin name was the reason it would not flash. Any attempt to fool the board (ie changing the bin file name) results in about 98% of the flash before a blank screen and freeze. Fortunately, using the correct file and name works and the display is back to normal, all be it unusable for my purposes.

Haven't found a way I can close this posting so if the owner would and accept my apologies for wasting space and time I'll fade away and leave the smarter people to the hard work.

Kenjesse