RPI zero W doesn't find wlanx interface on Release 23.01 image

[lida2003]

As title suggest: "RPI zero W doesn't find wlanx interface on Release 23.01 image"

PS:

1. wlan0 is brcmfmac, which is pi zero's onboard wifi. I just commented in blacklist.
2. usb wifi card is powered by external power.

Comparative test： using RPI 3b+ with Release 23.01, enable onboard wifi(brcmfmac), the same 8812AU wifi card is ok.

pi@piCamera:~ $ lsusb
Bus 001 Device 005: ID 0bda:881a Realtek Semiconductor Corp. RTL8812AU-VS 802.11a/b/g/n/ac 2T2R DB WLAN Adapter
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@piCamera:~ $ dmesg |tail
[  145.468344] usb 1-1.4: Manufacturer: Realtek
[  145.468377] usb 1-1.4: SerialNumber: 123456
[  183.382996] usb 1-1.4: USB disconnect, device number 4
[  186.324635] usb 1-1.4: new high-speed USB device number 5 using dwc2
[  186.455273] usb 1-1.4: config 1 interface 0 altsetting 0 endpoint 0x85 has an invalid bInterval 0, changing to 7
[  186.456087] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=881a, bcdDevice= 0.00
[  186.456144] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  186.456172] usb 1-1.4: Product: 802.11n NIC
[  186.456194] usb 1-1.4: Manufacturer: Realtek
[  186.456215] usb 1-1.4: SerialNumber: 123456
pi@piCamera:~ $ iwconfig
lo        no wireless extensions.

usb0      no wireless extensions.

wlan0     IEEE 802.11  ESSID:"AutoLab"
          Mode:Managed  Frequency:2.412 GHz  Access Point: D0:C7:C0:5C:CE:50
          Bit Rate=72.2 Mb/s   Tx-Power=31 dBm
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=70/70  Signal level=-21 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

pi@piCamera:~ $ ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 8  bytes 752 (752.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 752 (752.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 16:15:f8:c6:37:df  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.68.245  netmask 255.255.255.0  broadcast 192.168.68.255
        ether b8:27:eb:53:31:30  txqueuelen 1000  (Ethernet)
        RX packets 1607  bytes 130002 (126.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1915  bytes 310478 (303.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[lida2003]

OK, it might be the 88XXau_wfb driver issue. I'll re-install it and test again.

---

Re-install driver, then ok.

pi@piCamera:~/rtl8812au $ ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 8  bytes 752 (752.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 752 (752.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wfb-rf2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 2312
        ether 0c:91:60:03:5b:62  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.68.245  netmask 255.255.255.0  broadcast 192.168.68.255
        ether b8:27:eb:53:31:30  txqueuelen 1000  (Ethernet)
        RX packets 8331  bytes 693769 (677.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 7880  bytes 661492 (645.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0