Found error message after run tx_standalone.sh #249

jiratto · 2022-09-21T03:40:00Z

jiratto
Sep 21, 2022

I use the latest stable release clone build into khadas vim3 linux board (kernel : 4.9.241 aarch64 GNU/Linux)

khadas@vim1 ~/wifibroadcast/scripts (stable)$ sudo ./tx_standalone.sh wlan1

kernel:[ 3801.334328@0] Internal error: Oops: 96000005 [#1] PREEMPT SMP
kernel:[ 3802.262354@0] Process ifconfig (pid: 5079, stack limit = 0xffffff80201e0000)
kernel:[ 3802.269373@0] Stack: (0xffffff80201e3af0 to 0xffffff80201e4000)
kernel:[ 3802.275267@0] 3ae0: ffffff80201e3b60 ffffff80090cd7b4
kernel:[ 3802.283240@0] 3b00: 00000000ffffffdc 0000000000000000 ffffff800251b8a8 ffffff80201e3c28
kernel:[ 3802.291213@0] 3b20: 00000000ffffffdd ffffffc09abc9c10 ffffff80021c4a78 ffffff80201e3c28
kernel:[ 3802.299187@0] 3b40: 0000000000000009 ffffff80090cd7b4 00000000ffffffe0 0000000000000000
kernel:[ 3802.307160@0] 3b60: ffffff80201e3ba0 ffffff80090cd9f4 ffffff800adce590 0000000000000009
./tx_standalone.sh: line 19: 5079 Segmentation fault ifconfig $WLAN down
kernel:[ 3802.315134@0] 3b80: ffffff80201e3c28 0000000000000000 0000000000001003 ffffff80090d7db8
kernel:[ 3802.323107@0] 3ba0: ffffff80201e3bd0 ffffff8009c57240 ffffff80201e3c28 0000000000000009
kernel:[ 3802.331080@0] 3bc0: ffffffc09975d000 ffffff8009c57220 ffffff80201e3c00 ffffff8009c575b0
kernel:[ 3802.339053@0] 3be0: ffffffc09975d000 ffffff80201e3c50 0000000000000001 ffffff8009c57578
kernel:[ 3802.347027@0] 3c00: ffffff80201e3c30 ffffff8009c5778c ffffffc09975d000 0000000000001002
kernel:[ 3802.355000@0] 3c20: ffffff80201e3c40 ffffffc09975d000 ffffff80201e3c60 ffffff8009c61eb8
kernel:[ 3802.362974@0] 3c40: ffffffc09975d000 ffffff8009c61e94 ffffffc09975d080 ffffffc09975d080
kernel:[ 3802.370947@0] 3c60: ffffff80201e3ca0 ffffff8009c61fac ffffffc09975d000 0000000000001003
kernel:[ 3802.378920@0] 3c80: 0000000000008914 0000000000000000 0000007ffa8be050 ffffff80201e3d38
kernel:[ 3802.386893@0] 3ca0: ffffff80201e3cd0 ffffff8009d31020 0000000000000000 00000000ffffff9d
kernel:[ 3802.394867@0] 3cc0: 0000000000008914 0000000000000000 ffffff80201e3d60 ffffff8009d33480
kernel:[ 3802.402840@0] 3ce0: 0000000000008914 ffffffc08c41e3c0 0000007ffa8be050 ffffff800ac1b980
kernel:[ 3802.410814@0] 3d00: 0000000000000004 0000007ffa8be050 0000000000000123 000000000000001d
kernel:[ 3802.423467@0] 3d20: ffffff8009f32000 ffffff80090d7db8 ffffff800a331340 000000316e616c77
kernel:[ 3802.431440@0] 3d40: 0000000000000000 0000005556fb1002 0000005556fa6350 0000007ffa8be448
....
kernel:[ 3802.814855@0] Code: f942cf02 928235e6 8b060043 eb02027f (f948d862)

Answered by svpcom

Sep 23, 2022

On drone you have WFB version 22.9 and on GS WFB version 22.8. They are not compatible. Use the same version

View full answer

jiratto · 2022-09-21T03:43:04Z

jiratto
Sep 21, 2022
Author

I fixed some configs when compile rtl8812au

khadas@vim1 ~/rtl8812au$ ethtool -i wlan1
driver: rtl88xxau_wfb
version:
firmware-version:
expansion-rom-version:
bus-info: 1-1.2:1.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

1 reply

svpcom Sep 21, 2022
Maintainer

Don't change configs of rtl8812au when compiling. Need full kernel trace to find where oops from

jiratto · 2022-09-22T15:23:09Z

jiratto
Sep 22, 2022
Author

Thank you. I can compile with kernel 5.18, but can not start service.

$ cat /var/log/wifibroadcast.log
2022-09-22 15:18:10+0000 [-] Log opened.
2022-09-22 15:18:10+0000 [-] WFB version 22.9.16.22146-703a7f1e
2022-09-22 15:18:10+0000 [-] Run on aarch64/5.18.0 @vim1, profile drone using wlan1
2022-09-22 15:18:10+0000 [-] Using cfg files:
/usr/lib/python3/dist-packages/wfb_ng/conf/master.cfg
/usr/lib/python3/dist-packages/wfb_ng/conf/site.cfg
/etc/wifibroadcast.cfg
2022-09-22 15:18:10+0000 [-] # iw reg set BO
2022-09-22 15:18:11+0000 [-] # nmcli device show wlan1
2022-09-22 15:18:11+0000 [-] Switch wlan1 to unmanaged state
2022-09-22 15:18:11+0000 [-] # nmcli device set wlan1 managed no
2022-09-22 15:18:12+0000 [-] # ip link set wlan1 down
2022-09-22 15:18:12+0000 [-] # iw dev wlan1 set monitor otherbss
2022-09-22 15:18:12+0000 [-] # ip link set wlan1 up
2022-09-22 15:18:12+0000 [-] # iw dev wlan1 set channel 165 HT20
2022-09-22 15:18:12+0000 [-] Listen for telem stream 144(RX), 16(TX) on 0.0.0.0:14560
2022-09-22 15:18:12+0000 [-] UDPProxyProtocol starting on 14560
2022-09-22 15:18:12+0000 [-] UDPProxyProtocol starting on 14700
2022-09-22 15:18:12+0000 [-] UDPProxyProtocol starting on 35419
2022-09-22 15:18:12+0000 [-] Telem RX: /usr/bin/wfb_rx -p 144 -u 14700 -K /etc/drone.key -k 1 -n 2 -i 7669206 wlan1
2022-09-22 15:18:12+0000 [-] Telem TX: /usr/bin/wfb_tx -p 16 -u 14701 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 -i 7669206 wlan1
2022-09-22 15:18:12+0000 [-] AntennaFactory starting on 8001
2022-09-22 15:18:12+0000 [-] Started telem rx
2022-09-22 15:18:12+0000 [-] Started telem tx
2022-09-22 15:18:12+0000 [-] Listen for video stream 0 on 0.0.0.0:5602
2022-09-22 15:18:12+0000 [-] Started video tx
2022-09-22 15:18:12+0000 [-] Video: /usr/bin/wfb_tx -p 0 -u 5602 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 8 -n 12 -T 0 -i 7669206 wlan1
2022-09-22 15:18:12+0000 [-] UDPProxyProtocol starting on 14900
2022-09-22 15:18:12+0000 [-] UDPProxyProtocol starting on 54014
2022-09-22 15:18:12+0000 [-] Tunnel RX: /usr/bin/wfb_rx -p 32 -u 14900 -K /etc/drone.key -k 1 -n 2 -i 7669206 wlan1
2022-09-22 15:18:12+0000 [-] Tunnel TX: /usr/bin/wfb_tx -p 160 -u 14901 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 -i 7669206 wlan1
2022-09-22 15:18:12+0000 [-] AntennaFactory starting on 8003
2022-09-22 15:18:12+0000 [-] Started tunnel rx
2022-09-22 15:18:12+0000 [-] Started tunnel tx
2022-09-22 15:18:12+0000 [-] tunnel tx: Listen on 14901 for wlan1
2022-09-22 15:18:12+0000 [-] telem tx: Listen on 14701 for wlan1
2022-09-22 15:18:12+0000 [-] video tx: Listen on 5602 for wlan1
0 Closed)
2022-09-22 15:17:37+0000 [UDPProxyProtocol (UDP)] (UDP Port 36294 Closed)
2022-09-22 15:17:37+0000 [UDPProxyProtocol (UDP)] (UDP Port 14700 Closed)
2022-09-22 15:17:37+0000 [UDPProxyProtocol (UDP)] (UDP Port 14900 Closed)
2022-09-22 15:17:37+0000 [wfb_ng.server.AntennaFactory] (TCP Port 8001 Closed)
2022-09-22 15:17:37+0000 [wfb_ng.server.AntennaFactory] (TCP Port 8003 Closed)
2022-09-22 15:17:37+0000 [UDPProxyProtocol (UDP)] (UDP Port 14560 Closed)
2022-09-22 15:17:37+0000 [-] Main loop terminated.
2022-09-22 15:17:37+0000 [-] Exiting with code 0

2 replies

svpcom Sep 22, 2022
Maintainer

Why in your logfile time going backward?

jiratto Sep 22, 2022
Author

Sorry, This is a new log. No error message but connection not eatablish

[drone]
$ cat /var/log/wifibroadcast.log
2022-09-22 15:46:12+0000 [-] Log opened.
2022-09-22 15:46:12+0000 [-] WFB version 22.9.16.22146-703a7f1e
2022-09-22 15:46:12+0000 [-] Run on aarch64/5.18.0 @vim1, profile drone using wlan1
2022-09-22 15:46:12+0000 [-] Using cfg files:
/usr/lib/python3/dist-packages/wfb_ng/conf/master.cfg
/usr/lib/python3/dist-packages/wfb_ng/conf/site.cfg
/etc/wifibroadcast.cfg
2022-09-22 15:46:12+0000 [-] # iw reg set BO
2022-09-22 15:46:12+0000 [-] # nmcli device show wlan1
2022-09-22 15:46:12+0000 [-] # ip link set wlan1 down
2022-09-22 15:46:12+0000 [-] # iw dev wlan1 set monitor otherbss
2022-09-22 15:46:12+0000 [-] # ip link set wlan1 up
2022-09-22 15:46:12+0000 [-] # iw dev wlan1 set channel 165 HT20
2022-09-22 15:46:12+0000 [-] Listen for telem stream 144(RX), 16(TX) on 0.0.0.0:14560
2022-09-22 15:46:12+0000 [-] UDPProxyProtocol starting on 14560
2022-09-22 15:46:12+0000 [-] UDPProxyProtocol starting on 14700
2022-09-22 15:46:12+0000 [-] UDPProxyProtocol starting on 42875
2022-09-22 15:46:12+0000 [-] Telem RX: /usr/bin/wfb_rx -p 144 -u 14700 -K /etc/drone.key -k 1 -n 2 -i 7669206 wlan1
2022-09-22 15:46:12+0000 [-] Telem TX: /usr/bin/wfb_tx -p 16 -u 14701 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 -i 7669206 wlan1
2022-09-22 15:46:12+0000 [-] AntennaFactory starting on 8001
2022-09-22 15:46:12+0000 [-] Started telem rx
2022-09-22 15:46:12+0000 [-] Started telem tx
2022-09-22 15:46:12+0000 [-] Listen for video stream 0 on 0.0.0.0:5602
2022-09-22 15:46:12+0000 [-] Started video tx
2022-09-22 15:46:12+0000 [-] Video: /usr/bin/wfb_tx -p 0 -u 5602 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 8 -n 12 -T 0 -i 7669206 wlan1
2022-09-22 15:46:12+0000 [-] UDPProxyProtocol starting on 14900
2022-09-22 15:46:12+0000 [-] UDPProxyProtocol starting on 43861
2022-09-22 15:46:12+0000 [-] Tunnel RX: /usr/bin/wfb_rx -p 32 -u 14900 -K /etc/drone.key -k 1 -n 2 -i 7669206 wlan1
2022-09-22 15:46:12+0000 [-] Tunnel TX: /usr/bin/wfb_tx -p 160 -u 14901 -K /etc/drone.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 -i 7669206 wlan1
2022-09-22 15:46:12+0000 [-] AntennaFactory starting on 8003
2022-09-22 15:46:12+0000 [-] Started tunnel rx
2022-09-22 15:46:12+0000 [-] Started tunnel tx
2022-09-22 15:46:12+0000 [-] telem tx: Listen on 14701 for wlan1
2022-09-22 15:46:12+0000 [-] video tx: Listen on 5602 for wlan1
2022-09-22 15:46:12+0000 [-] tunnel tx: Listen on 14901 for wlan1

[GS]
$ cat /var/log/wifibroadcast.log
2022-09-22 22:38:36+0700 [-] Log opened.
2022-09-22 22:38:36+0700 [-] WFB version 22.8.1.46986-b04827e6
2022-09-22 22:38:36+0700 [-] Run on x86_64/5.4.0-91-generic @Melodic, profile gs using wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] Using cfg files:
/usr/lib/python3/dist-packages/wfb_ng/conf/master.cfg
/usr/lib/python3/dist-packages/wfb_ng/conf/site.cfg
/etc/wifibroadcast.cfg
2022-09-22 22:38:36+0700 [-] # iw reg set BO
2022-09-22 22:38:36+0700 [-] # nmcli device show wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] # ip link set wlx00c0cab088b6 down
2022-09-22 22:38:36+0700 [-] # iw dev wlx00c0cab088b6 set monitor otherbss
2022-09-22 22:38:36+0700 [-] # ip link set wlx00c0cab088b6 up
2022-09-22 22:38:36+0700 [-] # iw dev wlx00c0cab088b6 set channel 165 HT20
2022-09-22 22:38:36+0700 [-] Connect telem stream 2(RX), 1(TX) to 127.0.0.1:14550
2022-09-22 22:38:36+0700 [-] UDPProxyProtocol starting on 60128
2022-09-22 22:38:36+0700 [-] UDPProxyProtocol starting on 14600
2022-09-22 22:38:36+0700 [-] UDPProxyProtocol starting on 35870
2022-09-22 22:38:36+0700 [-] Telem RX: /usr/bin/wfb_rx -p 2 -u 14600 -K /etc/gs.key -k 1 -n 2 wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] Telem TX: /usr/bin/wfb_tx -p 1 -u 14601 -K /etc/gs.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] AntennaFactory starting on 8001
2022-09-22 22:38:36+0700 [-] Started telem rx
2022-09-22 22:38:36+0700 [-] Started telem tx
2022-09-22 22:38:36+0700 [-] Send video stream 3 to 127.0.0.1:5600
2022-09-22 22:38:36+0700 [-] AntennaFactory starting on 8002
2022-09-22 22:38:36+0700 [-] Started video rx
2022-09-22 22:38:36+0700 [-] Video: /usr/bin/wfb_rx -p 3 -c 127.0.0.1 -u 5600 -K /etc/gs.key -k 8 -n 12 wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] UDPProxyProtocol starting on 14800
2022-09-22 22:38:36+0700 [-] UDPProxyProtocol starting on 40480
2022-09-22 22:38:36+0700 [-] Tunnel RX: /usr/bin/wfb_rx -p 5 -u 14800 -K /etc/gs.key -k 1 -n 2 wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] Tunnel TX: /usr/bin/wfb_tx -p 4 -u 14801 -K /etc/gs.key -B 20 -G long -S 1 -L 1 -M 1 -k 1 -n 2 -T 0 wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] AntennaFactory starting on 8003
2022-09-22 22:38:36+0700 [-] Started tunnel rx
2022-09-22 22:38:36+0700 [-] Started tunnel tx
2022-09-22 22:38:36+0700 [-] telem tx: Listen on 14601 for wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] tunnel tx: Listen on 14801 for wlx00c0cab088b6
2022-09-22 22:38:36+0700 [-] telem rx: wlx00c0cab088b6 has DLT_IEEE802_11_RADIO Encap
2022-09-22 22:38:36+0700 [-] video rx: wlx00c0cab088b6 has DLT_IEEE802_11_RADIO Encap
2022-09-22 22:38:36+0700 [-] tunnel rx: wlx00c0cab088b6 has DLT_IEEE802_11_RADIO Encap

jiratto · 2022-09-22T15:25:07Z

jiratto
Sep 22, 2022
Author

$ nmcli
...
lo: unmanaged
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536

drone-wfb: unmanaged
"drone-wfb"
tun, sw, mtu 1445

wlan1: unmanaged
"Realtek RTL8812AU 802.11a/b/g/n/ac 2T2R"
wifi (rtl88xxau_wfb), 00:C0:CA:B0:88:BD, hw, mtu 2312

$ ifconfig wlan1
wlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 2312
unspec 00-C0-CA-B0-88-BD-00-00-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 1330 bytes 0 (0.0 B)
RX errors 0 dropped 10 overruns 0 frame 0
TX packets 158031 bytes 167437414 (167.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

$ ethtool -i wlan1
driver: rtl88xxau_wfb
version: 5.18.0
firmware-version:
expansion-rom-version:
bus-info: 1-1.2:1.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

0 replies

svpcom · 2022-09-23T04:26:06Z

svpcom
Sep 23, 2022
Maintainer

On drone you have WFB version 22.9 and on GS WFB version 22.8. They are not compatible. Use the same version

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Found error message after run tx_standalone.sh #249

{{title}}

Replies: 4 comments 3 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Select a reply

Found error message after run tx_standalone.sh #249

jiratto Sep 21, 2022

Replies: 4 comments · 3 replies

jiratto Sep 21, 2022 Author

svpcom Sep 21, 2022 Maintainer

jiratto Sep 22, 2022 Author

svpcom Sep 22, 2022 Maintainer

jiratto Sep 22, 2022 Author

jiratto Sep 22, 2022 Author

svpcom Sep 23, 2022 Maintainer

jiratto
Sep 21, 2022

Replies: 4 comments 3 replies

jiratto
Sep 21, 2022
Author

svpcom Sep 21, 2022
Maintainer

jiratto
Sep 22, 2022
Author

svpcom Sep 22, 2022
Maintainer

jiratto Sep 22, 2022
Author

jiratto
Sep 22, 2022
Author

svpcom
Sep 23, 2022
Maintainer