Issue making WFB working on RPI #107

Yes21 · 2020-03-10T15:15:52Z

Yes21
Mar 10, 2020

I've build 2 images using this procedure :
#53

My setup :

drone :
Pi2B + Pi cam + AWUS036ACH (rtl8812au)

gs :
Pi3B + 7 " HDMI screen + AWUS1900 (rtl8814au) or ASUS AC56 (rtl8812au)

Both Pis are ethernet connected with my desktop, and I can ssh to them.

The 2 Pis are booting perfectly, and the 2 wifi boards are up and in monitor mode.

But using "wfb-cli gs" on the gs Pi, I can see that all 3 connections failed (refused by the other side)

Here are the output of "sudo python -m telemetry.server gs wlan0" :

on drone :

2020-03-10 14:56:17+0000 [-] Log opened.
2020-03-10 14:56:17+0000 [-] # iw reg set BO
2020-03-10 14:56:17+0000 [-] # ifconfig wlan0 down
2020-03-10 14:56:17+0000 [-] # iw dev wlan0 set monitor otherbss
2020-03-10 14:56:17+0000 [-] # ifconfig wlan0 up
2020-03-10 14:56:17+0000 [-] # iw dev wlan0 set channel 161 HT20
2020-03-10 14:56:17+0000 [-] Connect telem stream 2(RX), 1(TX) to 127.0.0.1:14550
2020-03-10 14:56:17+0000 [-] UDPProxyProtocol starting on 58782
2020-03-10 14:56:17+0000 [-] UDPProxyProtocol starting on 14600
2020-03-10 14:56:17+0000 [-] UDPProxyProtocol starting on 50385
2020-03-10 14:56:17+0000 [-] Telem RX: /usr/bin/wfb_rx -p 2 -u 14600 -K /etc/gs.key -k 1 -n 2 wlan0
2020-03-10 14:56:17+0000 [-] Telem TX: /usr/bin/wfb_tx -p 1 -u 14601 -K /etc/gs.key -B 20 -G long -S 1 -L 0 -M 1 -k 1 -n 2 wlan0
2020-03-10 14:56:17+0000 [-] AntennaFactory starting on 8001
2020-03-10 14:56:17+0000 [-] Started telem rx
2020-03-10 14:56:17+0000 [-] Started telem tx
2020-03-10 14:56:17+0000 [-] Send video stream 3 to 127.0.0.1:5600
2020-03-10 14:56:17+0000 [-] AntennaFactory starting on 8002
2020-03-10 14:56:17+0000 [-] Started video rx
2020-03-10 14:56:17+0000 [-] Video: /usr/bin/wfb_rx -p 3 -c 127.0.0.1 -u 5600 -K /etc/gs.key -k 8 -n 12 wlan0
2020-03-10 14:56:17+0000 [-] Stopping reactor due to fatal error: [Errno 2] No such file or directory: '/proc/net/psched'
2020-03-10 14:56:17+0000 [UDPProxyProtocol (UDP)] (UDP Port 50385 Closed)
2020-03-10 14:56:17+0000 [main.AntennaFactory] (TCP Port 8002 Closed)
2020-03-10 14:56:17+0000 [UDPProxyProtocol (UDP)] (UDP Port 14600 Closed)
2020-03-10 14:56:17+0000 [UDPProxyProtocol (UDP)] (UDP Port 58782 Closed)
2020-03-10 14:56:17+0000 [main.AntennaFactory] (TCP Port 8001 Closed)
2020-03-10 14:56:17+0000 [-] Stopped RX telem rx with code 1
2020-03-10 14:56:17+0000 [-] Stopped RX video rx with code 1
2020-03-10 14:56:18+0000 [-] Unhandled error in Deferred:
2020-03-10 14:56:18+0000 [-] Unhandled Error
        Traceback (most recent call last):
          File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 457, in callback
            self._startRunCallbacks(result)
          File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 565, in _startRunCallbacks
            self._runCallbacks()
          File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 651, in _runCallbacks
            current.result = callback(current.result, *args, **kw)
          File "/usr/lib/python2.7/dist-packages/telemetry/server.py", line 319, in _init_services
            defer.maybeDeferred(init_tunnel, profile, wlans)])\
        --- <exception caught here> ---
          File "/usr/lib/python2.7/dist-packages/twisted/internet/defer.py", line 150, in maybeDeferred
            result = f(*args, **kw)
          File "/usr/lib/python2.7/dist-packages/telemetry/server.py", line 435, in init_tunnel
            tun_ep = TUNTAPTransport(reactor, p_in, cfg.ifname, cfg.ifaddr, mtu=settings.common.radio_mtu)
          File "/usr/lib/python2.7/dist-packages/telemetry/tuntap.py", line 61, in init
            with closing(IPRoute()) as ip:
          File "/usr/lib/python2.7/dist-packages/pyroute2/__init__.py", line 89, in new
            cls.register(cls.registry['class'])
          File "/usr/lib/python2.7/dist-packages/pyroute2/__init__.py", line 69, in getitem
            [name], 0)
          File "/usr/lib/python2.7/dist-packages/pyroute2/iproute.py", line 109, in <module>
            from pyroute2.netlink.rtnl.tcmsg import get_codel_parameters
          File "/usr/lib/python2.7/dist-packages/pyroute2/netlink/rtnl/tcmsg.py", line 31, in <module>
            _psched = open('/proc/net/psched', 'r')
        exceptions.IOError: [Errno 2] No such file or directory: '/proc/net/psched'
2020-03-10 14:56:18+0000 [-] Unhandled error in Deferred:
2020-03-10 14:56:18+0000 [-] Unhandled Error
        Traceback (most recent call last):
        Failure: twisted.internet.error.ProcessTerminated: A process has ended with a probable error condition: process ended with exit code 1.

2020-03-10 14:56:18+0000 [-] Stopped TX telem tx with code 1
2020-03-10 14:56:18+0000 [-] Unhandled error in Deferred:
2020-03-10 14:56:18+0000 [-] Unhandled Error
        Traceback (most recent call last):
        Failure: twisted.internet.error.ProcessTerminated: A process has ended with a probable error condition: process ended with exit code 1.

on gs :

2020-03-10 14:52:49+0000 [-] Log opened.                                                                              │
2020-03-10 14:52:49+0000 [-] # iw reg set BO                                                                          │
2020-03-10 14:52:49+0000 [-] # ifconfig wlan0 down                                                                    │
2020-03-10 14:52:49+0000 [-] # iw dev wlan0 set monitor otherbss                                                      │
2020-03-10 14:52:49+0000 [-] # ifconfig wlan0 up                                                                      │
2020-03-10 14:52:49+0000 [-] # iw dev wlan0 set channel 161 HT20──────────────────────────────────────────────────────┘
2020-03-10 14:52:49+0000 [-] Connect telem stream 2(RX), 1(TX) to 127.0.0.1:14550─────────────────────────────────────┐
2020-03-10 14:52:49+0000 [-] UDPProxyProtocol starting on 38488Connection refused.                                    │
2020-03-10 14:52:49+0000 [-] UDPProxyProtocol starting on 14600                                                       │
2020-03-10 14:52:49+0000 [-] UDPProxyProtocol starting on 52844                                                       │
2020-03-10 14:52:49+0000 [-] Telem RX: /usr/bin/wfb_rx -p 2 -u 14600 -K /etc/gs.key -k 1 -n 2 wlan0                   │
2020-03-10 14:52:49+0000 [-] Telem TX: /usr/bin/wfb_tx -p 1 -u 14601 -K /etc/gs.key -B 20 -G long -S 2 -L 0 -M 1 -k 1 -n 2 wlan0                                                                                                             │
2020-03-10 14:52:49+0000 [-] AntennaFactory starting on 8001                                                          │
2020-03-10 14:52:49+0000 [-] Started telem rx                                                                         │
2020-03-10 14:52:49+0000 [-] Started telem tx                                                                         │
2020-03-10 14:52:49+0000 [-] Send video stream 3 to 127.0.0.1:5600                                                    │
2020-03-10 14:52:49+0000 [-] AntennaFactory starting on 8002                                                          │
2020-03-10 14:52:49+0000 [-] Started video rx─────────────────────────────────────────────────────────────────────────┘
2020-03-10 14:52:49+0000 [-] Video: /usr/bin/wfb_rx -p 3 -c 127.0.0.1 -u 5600 -K /etc/gs.key -k 8 -n 12 wlan0
2020-03-10 14:52:50+0000 [-] Stopping reactor due to fatal error: [Errno 2] No such file or directory: '/proc/net/psched'
2020-03-10 14:52:50+0000 [UDPProxyProtocol (UDP)] (UDP Port 52844 Closed)
2020-03-10 14:52:50+0000 [main.AntennaFactory] (TCP Port 8001 Closed)
2020-03-10 14:52:50+0000 [main.AntennaFactory] (TCP Port 8002 Closed)
2020-03-10 14:52:50+0000 [UDPProxyProtocol (UDP)] (UDP Port 14600 Closed)
2020-03-10 14:52:50+0000 [UDPProxyProtocol (UDP)] (UDP Port 38488 Closed)
2020-03-10 14:52:50+0000 [-] Main loop terminated.
2020-03-10 14:52:50+0000 [-] Exiting with code 1

Yes21 · 2020-03-10T18:11:43Z

Yes21
Mar 10, 2020
Author

File "/usr/lib/python2.7/dist-packages/pyroute2/netlink/rtnl/tcmsg.py", line 31, in <module>
            _psched = open('/proc/net/psched', 'r')
        exceptions.IOError: [Errno 2] No such file or directory: '/proc/net/psched'

It seems that I'm missing "/proc/net/psched".
Don't now what it means ...

0 replies

svpcom · 2020-03-10T18:21:43Z

svpcom
Mar 10, 2020
Maintainer

svinota/pyroute2#245
this means that your custom kernel doesn't include CONFIG_NET_SCHED setting.
There are two ways:

Set CONFIG_NET_SCHED=y and rebuild kernel
Use updated version of python-pyroute2 (Try to run: pip install --upgrade pyroute2)

0 replies

Yes21 · 2020-03-10T19:09:47Z

Yes21
Mar 10, 2020
Author

Ok Thanks.
I think I'm able to do this ...

0 replies

Yes21 · 2020-03-10T19:53:00Z

Yes21
Mar 10, 2020
Author

I'm now building a new base image with kernels compiled with CONFIG_NET_SCHED=y

0 replies

Yes21 · 2020-03-11T14:37:59Z

Yes21
Mar 11, 2020
Author

Not enough ...

Now with :
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_PROC_CHILDREN=y

0 replies

Yes21 · 2020-03-12T19:15:39Z

Yes21
Mar 12, 2020
Author

I've now a "/proc/net/psched" file and the related errors have disappeared.
But it's not working, and I can't understand why.

So I give up.
It's really too difficult for me ...

0 replies

svpcom · 2020-03-12T20:43:43Z

svpcom
Mar 12, 2020
Maintainer

What is program output?

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Issue making WFB working on RPI #107

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 7 comments

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Issue making WFB working on RPI #107

Yes21 Mar 10, 2020

Replies: 7 comments

Yes21 Mar 10, 2020 Author

svpcom Mar 10, 2020 Maintainer

Yes21 Mar 10, 2020 Author

Yes21 Mar 10, 2020 Author

Yes21 Mar 11, 2020 Author

Yes21 Mar 12, 2020 Author

svpcom Mar 12, 2020 Maintainer

Yes21
Mar 10, 2020

Yes21
Mar 10, 2020
Author

svpcom
Mar 10, 2020
Maintainer

Yes21
Mar 10, 2020
Author

Yes21
Mar 10, 2020
Author

Yes21
Mar 11, 2020
Author

Yes21
Mar 12, 2020
Author

svpcom
Mar 12, 2020
Maintainer