diff --git a/ps2/mouse/README.md b/ps2/mouse/README.md
new file mode 100644
index 0000000..d7d62d8
--- /dev/null
+++ b/ps2/mouse/README.md
@@ -0,0 +1,47 @@
+--------------------------------
+PS/2 Mouse
+--------------------------------
+
+This is a collection of PS/2 mice communication examples.
+
+For details see:
+http://www-ug.eecg.utoronto.ca/desl/nios_devices_SoC/datasheets/PS2%20Protocol.htm
+http://www-ug.eecg.utoronto.ca/desl/nios_devices_SoC/datasheets/PS2%20Mouse%20Protocol.htm
+
+
+ps2_qnx_mouse_initialize_and_move.sr
+------------------------------
+
+This file contains setup and communication between a QNX host and a standard mouse.
+The mouse packets are 3 bytes long (standard mouse, no scrollwheel)
+The sample includes x movement, y movement, and a click.
+
+Initialize a ps2 mouse, configure it; the mouse then reports movement data.
+- Power is turned on, mouse resets
+- Host resets device, waits for reset to complete
+- Host waits for GUI to start (about 90 seconds)
+- Host sets sample rate to 40 samples/second
+- Host sets resolution to 8 counts/mm
+- Host enables data streaming
+- After a delay, the mouse is moved, and reports its changing location in a sequence of 3 bytes:
+  - flags, x movement, y movement
+  - The sample includes x and y movement, as well as two left clicks
+
+
+ps2_microsoft_mouse_initialize_and_move.sr
+------------------------------
+
+This file contains setup and communication between a Windows host and a microsoft mouse.
+The host releases the clock simultaneous to pulling the data low, which makes it challenging to 
+distinguish between "request-to-send" and a regular start-bit.
+
+Initialize a ps2 mouse, configure it; the mouse then reports movement data.
+
+- host resets device, waits for reset to complete
+- host sets sample rate to 200, 100, 80 - this activates reporting scroll wheel data is available
+- host sets device to maximum sample rate: 200; resolution=1: 2 count/mm; 1:1 scaling, stream mode
+- host gets device id, enable data reporting
+- after a delay, the mouse is moved, and reports it's changing location, in sequences of 4 bytes:
+    - flags, x movement, y movement, z (scroll wheel) movement.
+    - the sample data does not include any button presses or scroll wheel movement
+
diff --git a/ps2/mouse/ps2_microsoft_mouse_initialize_and_move.sr b/ps2/mouse/ps2_microsoft_mouse_initialize_and_move.sr
new file mode 100644
index 0000000..c1b6562
Binary files /dev/null and b/ps2/mouse/ps2_microsoft_mouse_initialize_and_move.sr differ
diff --git a/ps2/mouse/ps2_qnx_mouse_initialize_and_move.sr b/ps2/mouse/ps2_qnx_mouse_initialize_and_move.sr
new file mode 100644
index 0000000..c40aa7a
Binary files /dev/null and b/ps2/mouse/ps2_qnx_mouse_initialize_and_move.sr differ