s192hex8_offset0x8000.c

// [TURBO9_HEADER_START]
//////////////////////////////////////////////////////////////////////////////
//                          Turbo9 Microprocessor IP
//////////////////////////////////////////////////////////////////////////////
// Website: www.turbo9.org
// Contact: team[at]turbo9[dot]org
//////////////////////////////////////////////////////////////////////////////
// [TURBO9_LICENSE_START]
// BSD-1-Clause
//
// Copyright (c) 2020-2023
// Kevin Phillipson
// Michael Rywalt
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
//    this list of conditions and the following disclaimer.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS AND CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
// [TURBO9_LICENSE_END]
//////////////////////////////////////////////////////////////////////////////
// Engineer: Kevin Phillipson
// Description: s19 to hex file converter
//
//////////////////////////////////////////////////////////////////////////////
// History:
// 07.14.2023 - Kevin Phillipson
//   File header added
//
//////////////////////////////////////////////////////////////////////////////
// [TURBO9_HEADER_END]
/*

; --==========================> Gator uProccessor <===========================--
; -- File:    s192hex8.c  
; -- Engineer:    Kevin Phillipson
; -- Date:    03.28.07
; -- Revision:    10.03.20
; -- Description:
;
;    THIS IS OLD CODE AND SHOULD PROBABLY BE REWRITTEN, BUT IT WORKS.
;
; --==========================================================================--

*/

#include <stdio.h>
#include <string.h>

#define WIDTH 8

#define BUF_SIZE 16
#define MEM_OFFSET 0x8000
#define MEM_END    0xFFFF
#define MEM_SIZE   0x10000

typedef unsigned char u08;
typedef signed char s08;
typedef unsigned short  u16;
typedef signed short  s16;
typedef unsigned long u32;
typedef signed long s32;

u08 hex2bin(u08 hex_digit);
u08 bin2hex(u08 nibble);
s16 load_buffer(void);
void  crlf(void);
void  lf(void);


u08 buffer[BUF_SIZE];
s16 eof_buf[BUF_SIZE];


int main(void)
{


  u32 addr_idx = 0;
  u32 idx = 0;

  u08 num_bytes;

  u08 tmp;

  u16 hex_file_addr;
  u32 hex_file_depth = 0;
  
  u32 raw_idx = 0;
  u32 raw_addr[MEM_SIZE];
  u08 raw_data[MEM_SIZE];

  s08 flush;
  u08 state = 0;

  for (idx = 0; idx < MEM_SIZE; idx++)
    raw_addr[idx] = 0xFFFFFFFF; // Mark as unused

  for (idx = 0; idx < BUF_SIZE; idx++)
    buffer[idx] = 0x00;

  for (idx = 0; idx < BUF_SIZE; idx++)
    eof_buf[idx] = 0x00;

  while (load_buffer() != EOF)
  {
    flush = 0;
    
    switch(state)
    {
      case 0:
        if (strncmp(buffer,"S1",2) == 0)
        {
          num_bytes =   (hex2bin(buffer[2]) << 4) +
              (hex2bin(buffer[3])) - 3;
            
          hex_file_addr = (hex2bin(buffer[4]) << 12) +
              (hex2bin(buffer[5]) << 8) +
              (hex2bin(buffer[6]) << 4) + 
              (hex2bin(buffer[7]));
          
          flush = 8;
          state = 1;
        }
        break;

      case 1:
        if (num_bytes != 0)
        {
          if (hex_file_addr > hex_file_depth)
          {
            hex_file_depth = hex_file_addr;
          }
          
          raw_addr[raw_idx] = hex_file_addr;
          raw_data[raw_idx] =   (hex2bin(buffer[0]) << 4) +
                (hex2bin(buffer[1]));
                
          raw_idx++;
          hex_file_addr++;
          num_bytes--;
          flush = 2;
          
          if (num_bytes == 0)
          {
            state = 0;
          }
        }
        else
        {
          state = 0;
        }

        break;
        
      default:
        state = 0;
        break;
    }
    
    for (idx = 1; idx < flush; idx++)
      load_buffer();
  }

  for (addr_idx = MEM_OFFSET; addr_idx <= MEM_END; addr_idx++)
  {
    // DEADBEEF
    switch(addr_idx % 4)
    {
      case 0:
        tmp = 0xDE;
      break;
      case 1:
        tmp = 0xAD;
      break;
      case 2:
        tmp = 0xBE;
      break;
      default:
        tmp = 0xEF;
      break;
    }
    
    for (idx = 0; idx < raw_idx; idx++)
    {
      if (raw_addr[idx] == addr_idx)
        tmp = raw_data[idx];
    }
    putchar(bin2hex((tmp >> 4) & 0x0F));
    putchar(bin2hex((tmp >> 0) & 0x0F));

    lf();
  }

  return(0);

}


s16 load_buffer(void)
{
  s16 tmp;
  
  for (tmp = 0; tmp < BUF_SIZE-1; tmp++)
    buffer[tmp] = buffer[tmp+1];

  for (tmp = 0; tmp < BUF_SIZE-1; tmp++)
    eof_buf[tmp] = eof_buf[tmp+1];

  if (eof_buf[BUF_SIZE-1] != EOF) //
  {
    tmp = getchar();

    //make ucase
    if((tmp >= 0x61) && (tmp <= 0x7A))
      tmp = tmp - 0x20;

  }
  else
  {
    tmp = EOF;
  }
    
  buffer[BUF_SIZE-1] = tmp;
  eof_buf[BUF_SIZE-1] = tmp;

  return eof_buf[0];
}

void lf(void)
{
  putchar(0x0A);
}

void crlf(void)
{
  putchar(0x0D);
  putchar(0x0A);
}

u08 hex2bin(u08 hex_digit)
{
  u08 nibble;

  if ((hex_digit >= 0x30) && (hex_digit <= 0x39))
    nibble = hex_digit - 0x30;
  else
    if ((hex_digit >= 0x41) && (hex_digit <= 0x46))
      nibble = hex_digit - 0x37;
    else
      nibble = 0xFF;
    
  return nibble;
}

u08 bin2hex(u08 nibble)
{
  u08 hex_digit;

  if (nibble < 0x0A)
    hex_digit = nibble + 0x30;
  else
    hex_digit = nibble + 0x37;

  return hex_digit;
}