From 8ceda6d5a1e5402fd852e6cc59a286ce3dc545ee Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Fri, 28 Apr 2023 16:53:29 +0800 Subject: [PATCH 1/3] r8152: fix flow control issue of RTL8156A The feature of flow control becomes abnormal, if the device sends a pause frame and the tx/rx is disabled before sending a release frame. It causes the lost of packets. Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow control patch and timer. Then, the hardware could clear the state and the flow control becomes normal after enabling tx/rx. Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto(). Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 56 ++++++++++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 20 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0fc4b959edc18..afd50e90d1fee 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5986,6 +5986,25 @@ static void rtl8153_disable(struct r8152 *tp) r8153_aldps_en(tp, true); } +static u32 fc_pause_on_auto(struct r8152 *tp) +{ + return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024); +} + +static u32 fc_pause_off_auto(struct r8152 *tp) +{ + return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024); +} + +static void r8156_fc_parameter(struct r8152 *tp) +{ + u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp); + u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16); +} + static int rtl8156_enable(struct r8152 *tp) { u32 ocp_data; @@ -5994,6 +6013,7 @@ static int rtl8156_enable(struct r8152 *tp) if (test_bit(RTL8152_UNPLUG, &tp->flags)) return -ENODEV; + r8156_fc_parameter(tp); set_tx_qlen(tp); rtl_set_eee_plus(tp); r8153_set_rx_early_timeout(tp); @@ -6025,9 +6045,24 @@ static int rtl8156_enable(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data); } + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK); + ocp_data &= ~FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + usleep_range(1000, 2000); + ocp_data |= FC_PATCH_TASK; + ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data); + return rtl_enable(tp); } +static void rtl8156_disable(struct r8152 *tp) +{ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, 0); + + rtl8153_disable(tp); +} + static int rtl8156b_enable(struct r8152 *tp) { u32 ocp_data; @@ -6429,25 +6464,6 @@ static void rtl8153c_up(struct r8152 *tp) r8153b_u1u2en(tp, true); } -static inline u32 fc_pause_on_auto(struct r8152 *tp) -{ - return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024); -} - -static inline u32 fc_pause_off_auto(struct r8152 *tp) -{ - return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024); -} - -static void r8156_fc_parameter(struct r8152 *tp) -{ - u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp); - u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp); - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16); -} - static void rtl8156_change_mtu(struct r8152 *tp) { u32 rx_max_size = mtu_to_size(tp->netdev->mtu); @@ -9340,7 +9356,7 @@ static int rtl_ops_init(struct r8152 *tp) case RTL_VER_10: ops->init = r8156_init; ops->enable = rtl8156_enable; - ops->disable = rtl8153_disable; + ops->disable = rtl8156_disable; ops->up = rtl8156_up; ops->down = rtl8156_down; ops->unload = rtl8153_unload; From 61b0ad6f58e2066e054c6d4839d67974d2861a7d Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Fri, 28 Apr 2023 16:53:30 +0800 Subject: [PATCH 2/3] r8152: fix the poor throughput for 2.5G devices Fix the poor throughput for 2.5G devices, when changing the speed from auto mode to force mode. This patch is used to notify the MAC when the mode is changed. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index afd50e90d1fee..58670a65b840d 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -199,6 +199,7 @@ #define OCP_EEE_AR 0xa41a #define OCP_EEE_DATA 0xa41c #define OCP_PHY_STATUS 0xa420 +#define OCP_INTR_EN 0xa424 #define OCP_NCTL_CFG 0xa42c #define OCP_POWER_CFG 0xa430 #define OCP_EEE_CFG 0xa432 @@ -620,6 +621,9 @@ enum spd_duplex { #define PHY_STAT_LAN_ON 3 #define PHY_STAT_PWRDN 5 +/* OCP_INTR_EN */ +#define INTR_SPEED_FORCE BIT(3) + /* OCP_NCTL_CFG */ #define PGA_RETURN_EN BIT(1) @@ -7554,6 +7558,11 @@ static void r8156_hw_phy_cfg(struct r8152 *tp) ((swap_a & 0x1f) << 8) | ((swap_a >> 8) & 0x1f)); } + + /* Notify the MAC when the speed is changed to force mode. */ + data = ocp_reg_read(tp, OCP_INTR_EN); + data |= INTR_SPEED_FORCE; + ocp_reg_write(tp, OCP_INTR_EN, data); break; default: break; @@ -7949,6 +7958,11 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp) break; } + /* Notify the MAC when the speed is changed to force mode. */ + data = ocp_reg_read(tp, OCP_INTR_EN); + data |= INTR_SPEED_FORCE; + ocp_reg_write(tp, OCP_INTR_EN, data); + if (rtl_phy_patch_request(tp, true, true)) return; From cce8334f4aacd9936309a002d4a4de92a07cd2c2 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Fri, 28 Apr 2023 16:53:31 +0800 Subject: [PATCH 3/3] r8152: move setting r8153b_rx_agg_chg_indicate() Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx. Otherwise, the coalescing settings are useless. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 58670a65b840d..755b0f72dd44f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3027,12 +3027,16 @@ static int rtl_enable(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); switch (tp->version) { - case RTL_VER_08: - case RTL_VER_09: - case RTL_VER_14: - r8153b_rx_agg_chg_indicate(tp); + case RTL_VER_01: + case RTL_VER_02: + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + case RTL_VER_07: break; default: + r8153b_rx_agg_chg_indicate(tp); break; } @@ -3086,7 +3090,6 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) 640 / 8); ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR, ocp_data); - r8153b_rx_agg_chg_indicate(tp); break; default: @@ -3120,7 +3123,6 @@ static void r8153_set_rx_early_size(struct r8152 *tp) case RTL_VER_15: ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data / 8); - r8153b_rx_agg_chg_indicate(tp); break; default: WARN_ON_ONCE(1);