Printer mods for legacy Voron 3D printers Remember to update this README when uploading new mod!
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
| Creator | Mod title | Description | V1.6 | V2.1 | V2.2 |
|---|---|---|---|---|---|
| 3D_Black | Fan Covers | Different fan covers for 40mm fans | ✔️ | ✔️ | ✔️ |
| agsolino | RunOut Filament Holder | Holder for TriangleLab Runout sensor | ❔ | ❔ | ✔️ |
| RS-25-5 Rotated | RS-25-5 PSU mount rotated 90 Degrees | ❔ | ❔ | ✔️ | |
| Andreq | Mobius Shaft Jig | Tool used for grinding flats on a shaft at specific places | ✔️ | ✔️ | ✔️ |
| Armstr0ng | Led extrusions mount | A mount for aluminium LED extrusions with hidden fasteners | ❔ | ✔️ | ✔️ |
| ArmyAg08 | Logitech Camera Mounts | Different Logitech camera mounts, attached to the extrusions. Fits C270 and C310 | ✔️ | ✔️ | ✔️ |
| Corner Panel Clip | Corner panel clip that fit 3mm or 1/8" panels with foam tape | ❌ | ✔️ | ✔️ | |
| Badnoob | Serial Plate | Modified skirt piece to display your serial number | ❌ | ❌ | ✔️ |
| bryansj | Rotated Pi Mount with Heatsink | Raspberry Pi with Heatsink Frame for minimal channel width | ✔️ | ✔️ | ✔️ |
| Keystone Jack Universal Skirt Insert | Keystone Jack Insert to fit into any hexagonal hole in the skirt | ✔️ | ✔️ | ✔️ | |
| Befenybay Chain Anchors | Befenybay 10x11 Drag Chain Top Anchor and 2020 Extrusion Mount | ❌ | ✔️ | ✔️ | |
| blamm | Blind Joint Drilling Jigs | Jigs to drill your blind joints in the right spot | ✔️ | ✔️ | ✔️ |
| HEPA Filter Housing | HEPA Filter Housing for cheap Roomba filters | ✔️ | ✔️ | ✔️ | |
| Relay module bracket | Relay module (4 channel) mount | ✔️ | ✔️ | ✔️ | |
| cadriel | Triangle Lab Filament Sensor Mount | Triange Lab filament sensor mounts | ❔ | ❔ | ✔️ |
| Cerulean | Respooler | Respool tangled spools or bad koils | ✔️ | ✔️ | ✔️ |
| chilicoke | Low Profile Exhaust Duct | Quick-release exhaust duct adapter that requires minumal rear spacing | ❔ | ✔️ | ✔️ |
| christophmuellerorg | Duet Maestro mount for Voron 2.2 | Duet Maestro mount for V2.2 | ❌ | ❔ | ✔️ |
| FYSETC Panel Due 5i | Standard LCD compatible holder for the FYSETC integrated panel due | ❌ | ❔ | ✔️ | |
| Mains plug panel for the RND_165-00057 | Mains plug panel for the RND_165-00057 Filter/Switch combination | ❌ | ❔ | ✔️ | |
| Danowar | Dual Mobius Mount | Mounts two Mobius Extruders to the back of the printer | ✔️ | ✔️ | ✔️ |
| F6 Board Mount | Mounts for FYSETCS F6 controller boards | ✔️ | ✔️ | ✔️ | |
| Humidity Sensor Bracket | Mount for Humidity/Temperature sensor | ✔️ | ✔️ | ✔️ | |
| Load Cell Spool Holder | Spool holder with built in weight scale | ❌ | ✔️ | ✔️ | |
| TL 2-to-1 Mosquito Toolhead Adapter | Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead | ✔️ | ✔️ | ✔️ | |
| Tablet mount | Detachable mount for tablet using magnets | ✔️ | ✔️ | ✔️ | |
| V2.2 Wrench | 3 sided wrench for 2.2 bearing caps and panel clips | ❌ | ❌ | ✔️ | |
| Alternative Z Chain | Alternative mounting for Z-Axis zipchain | ❌ | ✔️ | ✔️ | |
| daveidmx | 30mm Fan Adapter | 30mm Fan Adapter | ❔ | ❔ | ❔ |
| Dunar | Panel Rest | External panel holder | ✔️ | ✔️ | ✔️ |
| etherwalker | Pi Zero Camera Mount | Pi Zero Camera Mount | ❔ | ❔ | ❔ |
| exquyre | Anet 12864 Display | Case for Anet 12864 LCD display | ✔️ | ✔️ | ✔️ |
| LED Bar Mount | Mount for 12V LED bars to the top extrusions | ❔ | ✔️ | ✔️ | |
| Cable Cover Insert | Room for 3-4 20AWG wires | ❔ | ❔ | ❔ | |
| Einsy + RAMPS Combo | Mounting bracket for 1 Einsy and 1 RAMPs | ✔️ | ✔️ | ✔️ | |
| FHeilmann | Voron 2.1 5mm Parts | Parts modified for extrusions with 5mm gap. | ❌ | ✔️ | ❌ |
| Fulg | PanelDue5 LCD Mount | Mount for the PanelDue5 LCD display | ✔️ | ✔️ | ✔️ |
| GSL12 | WAGO 221 Mounts | Wago 221 mounts for the electronics bay | ✔️ | ✔️ | ✔️ |
| Gamsche | Keystone Skirt Panel | 25mm skirt panel with integrated keystone jack. Use with 50mm smaller adjacent skirts for proper fit. | ❔ | ❔ | ✔️ |
| Glowtape | MKS GenL 1.0 Mounting Bracket | MKS GenL 1.0 Mounting Bracket | ✔️ | ✔️ | ✔️ |
| GustavTheMighty | 4.3 PanelDue Case | Case/mount for the 4.3 PanelDue LCD Display | ✔️ | ✔️ | ✔️ |
| Iakabos | Mini12864 Display Mount | Case and mounting arms for a Fysetc Mini12864 display | ❔ | ✔️ | ✔️ |
| Hackdoggo | BMGobius | Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears | ✔️ | ✔️ | ✔️ |
| hiemmer | Tool Holders | Tool holder for calipers, screwdriver etc | ❔ | ❔ | ❔ |
| JaredC01 | Mini 12864 Voron Knob | Upgraded knob for Fystec Mini 12864 RGB LED Display | ✔️ | ✔️ | ✔️ |
| Keystone Power Panel | Power Panel with 1 or 2 Keystone Jacks | ❌ | ✔️ | ✔️ | |
| Mosfet Mounts | Mosfet Mount for 4 or 6 Mosfets | ✔️ | ✔️ | ✔️ | |
| Jasperkm | 5mm panel mounting | Edited panel clips for 4mm panel + 1mm foam tape | ❌ | ✔️ | ✔️ |
| Brush holder | Brush holder next to printbed | ❌ | ✔️ | ✔️ | |
| Cable management | Cable trunking and 2020 slot cover | ❌ | ✔️ | ✔️ | |
| Exhaust fan guard | VORON styled fan guard for exhaust fan 120mm | ❌ | ✔️ | ✔️ | |
| Fire alarm mount | Mount for a small fire alarm on the back of the printer | ✔️ | ✔️ | ✔️ | |
| LED strip holder | Mount for led strips at an angle at the top of the printer | ✔️ | ✔️ | ✔️ | |
| Panel key wrench | Wrench for panel keys for ease of turning | ❌ | ✔️ | ✔️ | |
| Simple tool holder | Holder for 3 small tools using magnets | ✔️ | ✔️ | ✔️ | |
| Skirt mods | Some mods the skirts for fans and a clock | ❌ | ✔️ | ✔️ | |
| Jass_on | Tempered glass clips/handle | Panel clips and handles for using tempered glass side panels | ❌ | ✔️ | ❔ |
| Rear panel clips | Rear Panel Clips | ❌ | ✔️ | ❔ | |
| SKR 1.3 Cooling bracket | SKR 1.3 mount with built in 40mm fan mount | ✔️ | ✔️ | ✔️ | |
| JeJeff | 2020 Extrusion slot cover | Slot covers for extrusions with 5mm slot width | ✔️ | ✔️ | ✔️ |
| Cable Tie Mount | Cable tie mounts for 4mm cable ties | ✔️ | ✔️ | ✔️ | |
| Main Plug Panel | Main Plug Panel modified to hold a RJ45 ethernet socket | ✔️ | ✔️ | ✔️ | |
| Jink | Coroplast mount | Mount / Bracket supporting the coroplast sheets | ❌ | ✔️ | ❔ |
| Filament runout sensor mount | Filament runout sensor mount | ❌ | ✔️ | ❔ | |
| Left handed RAMPS mount | Mirrored RAMPS bracket | ✔️ | ✔️ | ✔️ | |
| Spool holder with scale | Spool holder with scale | ❌ | ✔️ | ❔ | |
| WAGO Mount | Mount for 3x WAGO connectors | ✔️ | ✔️ | ✔️ | |
| JustinVoelker | Mains Plug Panel with RJ45 | Mains plug panel with ethernet cutout | ✔️ | ✔️ | ✔️ |
| K1JWG | PanelDue 7i Custom Logo | Custom Voron 2 logo for use as a PanelDue 7i startup splash screen | ✔️ | ✔️ | ✔️ |
| manfre | Openbuild chain ends | Cable chain ends to use off the shelf chains with Voron parts | ❌ | ✔️ | ✔️ |
| masgar | VoltAmpMeter panel insert | Mounting panel for VoltAmpMeter | ✔️ | ❌ | ❌ |
| BTT SKR Mini v1.1 mounting frame | Mounting frame for BigTreeTech SKR Mini v1.1 | ✔️ | ✔️ | ✔️ | |
| 2-in-1 hotend housing | Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend | ✔️ | ✔️ | ✔️ | |
| meteyou | Gcode Buttons | Buttons in the skirt to execute gcode | ❔ | ✔️ | ✔️ |
| mildw4ve | Beltchain Remake | Beltchain Remake for Voron 2.2 | ❌ | ❌ | ✔️ |
| IR Probe Mount | DUET IR Probe Mount | ❌ | ❌ | ✔️ | |
| Nashuar | IKEA LEDBERG Spot Mount | LED Spot mount for IKEA LEDBERG | ❔ | ✔️ | ✔️ |
| WaveShare 7" Screen Mount | Display Case for 7" Waveshare LCD | ❔ | ❔ | ✔️ | |
| nemgrea | Magnetic Split Front Door | Hinges, handles and magnet mounts for creating a split front door panel | ❌ | ✔️ | ❔ |
| OrkusMG | Waveshare 5 Inch LCD Cover | Display Cover for the Waveshare 5 inch HDMI LCD screen | ✔️ | ✔️ | ✔️ |
| PhilLeMint | c920 Mount | c920 Camera Mount | ❔ | ✔️ | ✔️ |
| Panel Mounting | Panel Clips for 3/32" Foam Tape | ❔ | ✔️ | ✔️ | |
| Dual LED Light Mount | Mounts for Dual LED Bar | ❔ | ✔️ | ✔️ | |
| Velocity Stack | Velocity Stack Fan Cover | ❔ | ✔️ | ✔️ | |
| Indicator Mount | Mount for Indicator | ❔ | ✔️ | ✔️ | |
| pnokel | Cable Zipper | Small mount to secure wires with zip ties | ✔️ | ✔️ | ✔️ |
| Coroplast holders | Different coroplast holders for added support | ❌ | ✔️ | ❔ | |
| Toothed Idler | 14.5mm toothed idler | ❌ | ❌ | ❌ | |
| przybybr | V2.1 Omron Mount | Mount for Omron probe in V2.1 | ❔ | ✔️ | ❌ |
| Railgunner | Dual Direct Drive X Carriage | Dual direct drive using 2x Bondtech BMG | ❔ | ❔ | ❔ |
| Randommen96 | LCD bracket extended | LCD bracket extended for 6mm panels | ❔ | ❔ | ✔️ |
| Led strip mount DIODER | Led strip mount for Ikea Dioder | ❔ | ❔ | ✔️ | |
| PSU bracket | PSU AIO bracket for 5v, 12v and 24v | ❔ | ❔ | ✔️ | |
| Raspi cam mount | Cam mount for alie raspi cams | ❔ | ❔ | ✔️ | |
| schlank | Turbocharger | Alternative fumes extraction solution | ❌ | ✔️ | ✔️ |
| Minima | Minimalistic Fysetc Mini12864 display mount | ❌ | ❔ | ✔️ | |
| Seamen | RAMPS Extender Holder | Mount for RAMPS board with the stepper extender | ✔️ | ✔️ | ✔️ |
| Slidr | Panzer Chain | Alternative energie chain | ❔ | ❔ | ✔️ |
| Sparreau | 5V Power Supply Mount | 5V Power Supply Mount | ✔️ | ✔️ | ✔️ |
| FSR Circuit Mount | Bracket for mounting the FSR PCB. | ❌ | ✔️ | ❌ | |
| Z Rail Stop | Z Rail Stop | ❌ | ✔️ | ✔️ | |
| Bed Extrusion Spacer | Bed Extrusion Spacer | ❌ | ✔️ | ✔️ | |
| Dial Indicator Fan Mount | Dial Indicator Fan Mount | ❔ | ❔ | ❔ | |
| Mains Plug Panel Parametric | Scalable mains plug panel with small modifications | ✔️ | ✔️ | ✔️ | |
| Z Idler Frame Extra Tab | An extra tab added to the Z idler to prevent sagging / rotation | ❌ | ✔️ | ❌ | |
| sporadic | 10x15 Chain Z Mounts | End Z mounts for 10x15 Befenybay Drag Chain | ❔ | ✔️ | ❔ |
| 30A Relay Mount | Mount for a 30A relay module available on Amazon | ❔ | ✔️ | ✔️ | |
| Dual RS-25 Mount | Dual mount for side by side RS-25 supplies | ❔ | ✔️ | ✔️ | |
| Dual SKR 1.3 Mounts | Dual mounts for side by side SKR 1.3 controllers with fan and fanless options | ❔ | ✔️ | ✔️ | |
| Wago 221-415 Mount | Mount for a single Wago 221-415 | ❔ | ✔️ | ✔️ | |
| Stephan | M12 Probeholder | Drop in replacement of the stock probe to a M12 | ❔ | ✔️ | ❔ |
| BlTouch Mount | Drop in replacement of the stock probe to a BLTouch | ❔ | ✔️ | ❔ | |
| steve450 | Corner Brackets | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics | ❔ | ✔️ | ❔ |
| synfinatic | Duet Fan Mount | Duet/Duex fan mount with air vents directly above the steppers to increase airflow | ✔️ | ✔️ | ✔️ |
| E-Stop Switch | Mount for emergency button attached to the top of the printer | ❌ | ✔️ | ❔ | |
| Filament DryBox | Mount for filament drybox attached to the side of the printer | ❌ | ✔️ | ❔ | |
| LED Mount | Mount for LED lightbars | ❔ | ✔️ | ✔️ | |
| PS Extra Bracket | Extra bracket to keep the power supply in place | ❔ | ❔ | ❔ | |
| RJ45 Mount | Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient | ❔ | ❔ | ❔ | |
| Trippinonaduck | Switch Holder | Holder for Anit-Vandal Switches mounted in skirt holes | ❌ | ✔️ | ✔️ |
| LRS-75-5 | Mount for LRS-75-5 Power Supply | ✔️ | ✔️ | ✔️ | |
| warriorofwire | Openbuilds Drag Chain 2.1 | Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck | ❌ | ✔️ | ❌ |
| Openbuilds Drag Chain 2.2 | Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck | ❌ | ❌ | ✔️ | |
| Direct Drive BMG-m mount | Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo | ❔ | ✔️ | ✔️ | |
| wile.e.coyote | Coroplast Support | Support for the coroplast to prevent sagging | ❌ | ✔️ | ❔ |
| Dual Buck Bracket | Mounting bracket for 2 buck converters | ✔️ | ✔️ | ✔️ | |
| Nozzle Scrubber Mount | Mount for brass brush. Used for cleaning nozzle before printing | ❌ | ✔️ | ✔️ | |
| Wago Mounts | Different mounts for Wago connectors | ✔️ | ✔️ | ✔️ | |
| Xile | AfterBurner Umbilical | Supports a umbilical setup, on AB, taking the strain off connectors | ❔ | ❔ | ✔️ |