Not working for me

[Barabba11]

Hi, after tried everything possible with Matthew Tong and Robert Oostenveld I tried with yours, as the problem I'm probably facing with their releases is the jitter problem, the signal outputs but fixtures don't catch it.
I tried yours, and after some work trying to find around all the libraries needed I found out that it connects to the wifi router, but it doesn't answer the broadcast, i've tested it with DMX-Workshop which can't discover my Wemos D1, i can ping it but no dmx support.
I would recomend you to realize a .bin file to upload it easy, this will save us for any stupid mistake we may do or have compile problems. Thank you a lot

[robertoostenveld]

I am not planning to release precompiled firmwares. I would welcome it if someone (e.g. you) were to release binary firmware versions for the different ESP boards, and provide support for them.

[Barabba11]

Thanks for reply/support, I've tried different releases, there are many around, anyway I've found one that works and it's also stable, for who is interested I paste link here: https://github.com/bombcheck/ESP8266_ArtNet-LED-DMX-Node.

[robertoostenveld]

Thanks, I will add a link to it in the documentation.

…

On Mon, Feb 10, 2020 at 8:03 PM Barabba11 ***@***.***> wrote: Thanks for reply/support, I've tried different releases, there are many around, anyway I've found one that works and it's also stable, for who is interested I paste link here: https://github.com/bombcheck/ESP8266_ArtNet-LED-DMX-Node. — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#17?email_source=notifications&email_token=AAG3PY6OS47OVVFF3D5SNLLRCGQGXA5CNFSM4KMW34T2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOELJ2WMA#issuecomment-584297264>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAG3PY753XWVR65HUPYJU5LRCGQGXANCNFSM4KMW34TQ> .