Heltec Esp32 V3 TX non stop

[nazainurin]

Im using latest firmware for Heltec Esp32 V3 and it TX non stop. On lcd screen appeared TX information and not back to normal. What can I do?

[richonguzman]

This is tracker firmware?

[nazainurin]

This is tracker firmware?

yes. latest firmware for tracker. If im use for iGate, this board always restart when received the signal. But now I want to use for tracker. My board already install GPS module.

[richonguzman]

Hi, could you test it further?

[richonguzman]

this should been solved with the latest updates for Heltec boards

[nazainurin]

still same

…

On Fri, 10 Jan 2025, 4:11 am Ricardo Guzman (Richonguzman), < ***@***.***> wrote: this should been solved with the latest updates for Heltec boards — Reply to this email directly, view it on GitHub <#203 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKYOI3EWLBTDCYACN4MSLFD2J3JXZAVCNFSM6AAAAABTLLRG4OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKOBRGE3DENJXGU> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[richonguzman]

which version of V3 is your board? V3 or V3.2 ?

you have this board flashed with Tracker or iGate firmware?

[nazainurin]

im working as tracker *MOHD NAZAINURIN BIN MOHD NAWAWI* *9M2OCW / 9M4BCW / 9M4GCW* *Malaysia Amateur Radio Operator* *No 18, Jalan Pulasan 32,* *Taman Kota Masai,* *81700 Pasir Gudang, * *Johor Darul Ta'zim.* *Email : ***@***.*** / ***@***.**** *No tel : 011-1072 2904 / 011-1214 1521*

…

On Fri, 10 Jan 2025, 4:39 am Ricardo Guzman (Richonguzman), < ***@***.***> wrote: which version of V3 is your board? V3 or V3.2 ? you have this board flashed with Tracker or iGate firmware? — Reply to this email directly, view it on GitHub <#203 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKYOI3FHUN3QWJEYCYBDLV32J3NALAVCNFSM6AAAAABTLLRG4OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKOBRGIYDINRXGI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[richonguzman]

hi, lets work it as a tracker:

which firmware version did you use?

HELTEC_V3_GPS
HELTEC_V3_TNC??

is yours new HELTEC_V3.2?