Skip to content

Latest commit

 

History

History
344 lines (254 loc) · 15.5 KB

syntax.md

File metadata and controls

344 lines (254 loc) · 15.5 KB

WireViz Syntax

Main sections

connectors:  # dictionary of all used connectors
  <str>   :    # unique connector designator/name
    ...          # connector attributes (see below)
  <str>   :
    ...
  ...

cables:      # dictionary of all used cables and wires
  <str>   :    # unique cable designator/name
    ...          # cable attributes (see below)
  <str>   :
    ...
  ...

connections:  # list of all connections to be made
              # between cables and connectors
  -
    ...         # connection set (see below)
  -
    ...
  ...

additional_bom_items:  # custom items to add to BOM
  - <bom-item>           # BOM item (see below)
  ...

Connector attributes

<str>   :  # unique connector designator/name
  # general information about a connector (all optional)
  type: <str>   
  subtype: <str>   
  color: <color>  # see below
  image: <image>  # see below
  notes: <str>   

  # product information (all optional)
  pn: <str>            # [internal] part number
  mpn: <str>           # manufacturer part number
  manufacturer: <str>  # manufacturer name

  # pinout information
  # at least one of the following must be specified
  pincount: <int>    # if omitted, is set to length of specified list(s)
  pins: <List>       # if omitted, is autofilled with [1, 2, ..., pincount]
  pinlabels: <List>  # if omitted, is autofilled with blanks

  # rendering information (all optional)
  style: <style>         # may be set to simple for single pin connectors
  show_name: <bool>      # defaults to true for regular connectors,
                         # false for simple connectors
  show_pincount: <bool>  # defaults to true for regular connectors
                         # false for simple connectors
  hide_disconnected_pins: <bool>  # defaults to false

  # loops
  loops: <List>  # every list item is itself a list of exactly two pins
                 # on the connector that are to be shorted

  # auto-generation
  autogenerate: <bool>  # optional; defaults to false; see below

Auto-generation of connectors

The autogenerate: true option is especially useful for very simple, recurring connectors such as crimp ferrules, splices, and others, where it would be a hassle to individually assign unique designators for every instance.

By default, when defining a connector, it will be generated once using the specified designator, and can be referenced multiple times, in different connection sets (see below).

If autogenerate: true is set, the connector will not be generated at first. When defining the connections section (see below), every time the connector is mentioned, a new instance with an auto-incremented designator is generated and attached.

Since the auto-incremented and auto-assigned designator is not known to the user, one instance of the connector can not be referenced again outside the point of creation. The autogenerate: true option is therefore only useful for terminals with only one wire attached, or splices with exactly one wire going in, and one wire going out. If more wires are to be attached (e.g. for a three-way splice, or a crimp where multiple wires are joined), a separate connector with autogenerate: false and a user-defined, unique designator needs to be used.

Cable attributes

<str>   :  # unique cable designator/name
  # general information about a connector (all optional)
  category: <category>  # may be set to bundle;
                        # generates one BOM item for every wire in the bundle
                        # instead of a single item for the entire cable;
                        # renders with a dashed outline
  type: <str>   
  gauge: <int/float/str>  # allowed formats:
                          # <int/float> mm2  is understood
                          # <int> AWG        is understood
                          # <int/float>      is assumed to be mm2
                          # <str>            custom units and formats are allowed
                          #                  but unavailable for auto-conversion
  show_equiv: <bool>      # defaults to false; can auto-convert between mm2 and AWG
                          # and display the result when set to true
  length: <int/float>     # is assumed to be in meters
  shield: <bool/color>    # defaults to false
                          # setting to true will display the shield as a thin black line
                          # using a color (see below) will render the shield in that color
                          # using 's' as the wire number
  color: <color>  # see below
  image: <image>  # see below
  notes: <str>   

  # product information (all optional)
  pn: <str>            # [internal] part number
  mpn: <str>           # manufacturer part number
  manufacturer: <str>  # manufacturer name

  # conductor information
  # the following combinations are permitted:
  # wirecount only          no color information is specified
  # colors only             wirecount is inferred from list length
  # wirecount + color_code  colors are auto-generated based on the specified
  #                         color code (see below) to match the wirecount
  # wirecount + colors      colors list is trimmed or repeated to match the wirecount
  wirecount: <int>
  colors: <List>     # list of colors (see below)
  color_code: <str>  # one of the supported cable color codes (see below)

  # rendering information (all optional)
  show_name: <bool>       # defaults to true
  show_wirecount: <bool>  # defaults to true

Connection sets

A connection set is used to connect multiple components together. Multiple connections can be easily created in parallel within one connection set, by specifying a list of individual pins (for connectors) or wires (for cables) for every component along the way.

connections:
  -                # Each list entry is a connection set
    - <component>    # Each connection set is itself a list of items
    - <component>    # Items must alternatingly belong to the connectors and cables sections
    -...

  - # example (single connection)
    - <connector>: <pin>   # attach one pin of the connector
    - <cable>:     <wire>  # attach one wire of the cable
    - <connector>          # for simple connectors, pin 1 is implicit
    - <cable>:     s       # for shielded wires, s attaches to the shield

  - # example (multiple parallel connections)
    - <connector>: [<pin>,  ..., <pin> ]  # attach multiple pins in parallel
    - <cable>:     [<wire>, ..., <wire>]  # attach multiple wires in parallel
    - <connector>                         # auto-generate a new connector for every parallel connection
    - <cable>:     [<wire>-<wire>]        # specify a range of wires to attach in parallel
    - [<connector>, ..., <connector>]     # specify multiple simple connectors to attach in parallel
                                          # these may be unique, auto-generated, or a mix of both

  ...
  • Each connection set is a list of components.
  • The minimum number of items is two.
  • The maximum number of items is unlimited.
  • Items must alternatingly belong to the connectors and the cables sections.
  • When a connection set defines multiple parallel connections, the number of specified <pin>s and <wire>s for each component in the set must match. When specifying only one designator, one is auto-generated for each connection of the set.

Single connections

Connectors

  • - <designator>: <int/str> attaches a pin of the connector, referring to a pin number (from the connector's pins attribute) or a pin label (from its pinlabels attribute), provided the label is unique.

  • - <designator> is allowed for simple connectors, since they have only one pin to connect. For connectors with autogenerate: true, a new instance, with auto-generated designator, is created.

Cables

  • <designator>: <wire> attaches a specific wire of a cable, using its number.

Multiple parallel connections

Connectors

  • - <designator>: [<pin>, ..., <pin>]

    Each <pin> may be:

    • <int/str> to refer to a specific pin, using its number (from its pins attribute) or its label (from its pinlabels attribute, provided the label is unique for this connector)

    • <int>-<int> auto-expands to a range, e.g. 1-4 auto-expands to 1,2,3,4; 9-7 will auto-expand to 9,8,7.

    • Mixing types is allowed, e.g. [<pin>, <pinlabel>, <pin>-<pin>, <pin>]

  • - [<designator>, ..., <designator>]

    Attaches multiple different single pin connectors, one per connection in the set. For connectors with autogenerate: true, a new instance, with auto-generated designator, is created with every mention. Auto-generated and non-autogenerated connectors may be mixed.

  • - <designator>

    Attaches multiple instances of the same single pin connector, one per connectioin in the set. For connectors with autogenerate: true, a new instance, with auto-generated designator, is created for every connection in the set. Since only connectors with pincount: 1 can be auto-generated, pin number 1 is implicit.

Cables

  • <designator>: [<wire>, ..., <wire>]

    Each <wire> may be:

    • <int> to refer to a specific wire, using its number.
    • <int>-<int> auto-expands to a range.

BOM items

Connectors (both regular, and auto-generated), cables, and wires of a bundle are automatically added to the BOM.

Additional BOM entries can be generated in the sections marked <bom-item> above.

-
  description: <str>              
  qty: <int/str>  # when used in the additional_bom_items section:
                  # <int>            manually specify qty.
                  # when used within a component:
                  # <int>            manually specify qty.
                  # pincount         match number of pins of connector
                  # wirecount        match number of wires of cable/bundle
                  # connectioncount  match number of connected pins
  # all the following are optional:
  unit: <str>   
  designators: <List>
  pn: <str>            # [internal] part number
  mpn: <str>           # manufacturer part number
  manufacturer: <str>  # manufacturer name

Colors

Colors are defined via uppercase, two character strings. Striped/banded wires can be specified by simply concatenating multiple colors, with no space inbetween, eg. GNYE for green-yellow.

The following colors are understood:

  • BK ##000000 (black)
  • WH ##ffffff (white)
  • GY ##999999 (grey)
  • PK ##ff66cc (pink)
  • RD ##ff0000 (red)
  • OG ##ff8000 (orange)
  • YE ##ffff00 (yellow)
  • OL ##708000 (olive green)
  • GN ##00ff00 (green)
  • TQ ##00ffff (turquoise)
  • LB ##a0dfff (light blue)
  • BU ##0066ff (blue)
  • VT ##8000ff (violet)
  • BN ##895956 (brown)
  • BG ##ceb673 (beige)
  • IV ##f5f0d0 (ivory)
  • SL ##708090 (slate)
  • CU ##d6775e (copper)
  • SN ##aaaaaa (tin)
  • SR ##84878c (silver)
  • GD ##ffcf80 (gold)

Cable color codes

Supported color codes:

Images

Both connectors and cables accept including an image with a caption within their respective nodes.

image:
  src: <path>        # path to the image file
  # optional parameters:
  caption: <str>     # text to display below the image
  width: <int>       # range: 1~65535; unit: points
  height: <int>      # range: 1~65535; unit: points
  # if only one dimension (width/height) is specified, the image is scaled proportionally.
  # if both width and height are specified, the image is stretched to fit.

For more fine grained control over the image parameters, please see advanced_image_usage.md.

Multiline strings

The following attributes accept multiline strings:

  • type
  • subtype (connectors only)
  • notes
  • manufacturer
  • mpn
  • image.caption

Method 1

By using |, every following indented line is treated as a new line.

attribute: |
  This is line 1.
  This is line 2.

Method 2

By using double quoted strings, \n within the string is converted to a new line.

attribute: "This is line 1.\nThis is line 2."

Plain (no quotes) or single quoted strings do not convert \n.

See yaml-multiline.info for more information.

Inheritance

YAML anchors and references are useful for defining and referencing information that is used more than once in a file, e.g. when using defining multiple connectors of the same type or family. See Demo 02 for an example.