diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README
index 6baa457783496..a0824eccf0444 100644
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -405,9 +405,14 @@ Params:
                                 non-lite SKU of CM4).
                                 (default "on")
 
-        sd_cqe                  Set to "off" to disable Command Queueing if you
-                                have an incompatible Class A2 SD card
-                                (Pi 5 only, default "on")
+        sd_cqe                  Modify Command Queuing behaviour on the main SD
+                                interface. Legal values are:
+                                0: disable CQ
+                                1: allow CQ for known-good SD A2 cards, and all
+                                   eMMC cards
+                                2: allow CQ for all SD A2 cards that aren't
+                                   known-bad, and all eMMC cards.
+                                (2712 only, default "1")
 
         sd_overclock            Clock (in MHz) to use when the MMC framework
                                 requests 50MHz
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-ds.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712-ds.dtsi
index adff5ae55b1f4..82d97d4af84bf 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-ds.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-ds.dtsi
@@ -586,7 +586,7 @@
 		clocks = <&clk_emmc2>;
 		sdhci-caps-mask = <0x0000C000 0x0>;
 		sdhci-caps = <0x0 0x0>;
-		supports-cqe;
+		supports-cqe = <1>;
 		mmc-ddr-3_3v;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 83b88b0107f3c..b6cb76ada0a2d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -322,7 +322,7 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_gpio2        { };
 	sd-uhs-sdr50;
 	sd-uhs-ddr50;
 	sd-uhs-sdr104;
-	supports-cqe;
+	supports-cqe = <1>;
 	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
 	//no-1-8-v;
 	status = "okay";
@@ -703,7 +703,7 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
 
 / {
 	__overrides__ {
-		sd_cqe = <&sdio1>, "supports-cqe?";
+		sd_cqe = <&sdio1>, "supports-cqe:0";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
index 79666d85c31a2..129d7be38eb93 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
@@ -296,7 +296,7 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_gpio2        { };
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 	broken-cd;
-	supports-cqe;
+	supports-cqe = <1>;
 	status = "okay";
 };
 
@@ -710,5 +710,6 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
 			<&ant2>, "output-low?=on";
 		noanthogs = <&ant1>,"status=disabled",
 			<&ant2>, "status=disabled";
+		sd_cqe = <&sdio1>, "supports-cqe:0";
 	};
 };