Skip to content

Latest commit

 

History

History
193 lines (124 loc) · 8.29 KB

README.md

File metadata and controls

193 lines (124 loc) · 8.29 KB
Raw

环境编译说明|Environment Compilation Instruction

EasySpider分三部分：

  1. 主程序：在ElectronJS文件夹下。
  2. 浏览器扩展：在Extension文件夹下，为浏览器的“操作台”的代码，打包后的扩展在此目录下的EasySpider_zh.crx文件。
  3. 执行阶段程序：在ExecuteStage文件夹下。

此部分为主程序的编译说明。

EasySpider is divided into three parts:

  1. Main program: Located in the ElectronJS folder.
  2. Browser extension: Located in the Extension folder, i.e., the EasySpider_en.crx file in this folder.
  3. Execution stage program: Located in the ExecuteStage folder.

This section covers the compilation instructions for the main program.

建议编译顺序|Suggested Compilation Order

  1. 编译浏览器扩展，否则在主程序执行时会提示找不到EasySpider_zh.crx的错误。
  2. 编译主程序，此时主程序可以正常运行，但无法执行任务，只能设计任务。
  3. 编译执行阶段程序，否则无法执行程序，只能设计程序。
  1. Compile the browser extension, otherwise an error will be prompted when the main program is executed that EasySpider_en.crx cannot be found.
  2. Compile the main program, at this time the main program can run normally, but can not execute the task, can only design the task.
  3. Compile the execution stage program, otherwise the program cannot be executed, can only design the program.

注意事项|Note

请记住，每当EasySpider扩展程序和执行程序更新时，都要更新EasySpider.crx和easyspider_executestage文件。

Remember to update the EasySpider.crx and easyspider_executestage files whenever the EasySpider extension and execution program are updated.

环境构建|Environment Setup

以下以Windows x64版本为例。

Taking the example of Windows x64 version.

浏览器和驱动|Browser and Driver

实在搞不定本节的情况下，下载一个直接能用的EasySpider，并把文件夹内的EasySpider\resources\app\chrome_win64文件夹拷贝到此ElectronJS文件夹下即可。

If you're unable to handle the tasks in this section, you can download a ready-to-use EasySpider. Simply copy the EasySpider\resources\app\chrome_win64 folder from the downloaded files and paste it into the ElectronJS folder.

在自己的机器环境已经安装了Chrome的情况下，直接执行python3 update_chrome.py也可以完成本节下面写的一系列的操作，注意设置文件中的Chrome大版本号为本机Chrome的版本号。

If you already have Chrome installed on your local machine, you can directly execute python3 update_chrome.py to perform the operations mentioned in the following section. Make sure to set the Chrome major version in the configuration file to match the version of Chrome installed on your machine.

下载一个Chrome：https://www.google.com/chrome/，然后找到Chrome安装后的文件夹，如C:\Program Files\Google\Chrome\Application，把这个文件夹拷贝到此ElectronJS文件夹内，并按照以下格式更名：

chrome_win32/ # for windows x32
chrome_win64/ # for windows x64
chrome_linux64/ # for linux x64
chrome_mac64/ # for mac x64

然后，从下面的页面下载和自己安装的Chrome版本一致的Chromedriver：https://chromedriver.chromium.org/downloads，把chromedriver放入刚刚的chrome文件夹内，并更名为下面的格式：

chromedriver_win32.exe # for windows x32
chromedriver_win64.exe # for windows x64
chromedriver_linux64 # for linux x64
chromedriver_mac64 # for mac x64

例如，如果您想在Windows x64平台上构建此软件，那么您首先需要下载适用于Windows x64的Chrome浏览器，并将整个chrome文件夹复制到ElectronJS文件夹中，然后将文件夹重命名为chrome_win64。假设您下载的Chrome版本是110。接下来，下载一个适用于Windows x64的110版本的ChromeDriver，并将其放入chrome_win64文件夹中，然后将其重命名为chromedriver_win64.exe。

最后，把此文件夹内的stealth.min.js和execute.bat文件拷贝入chrome文件夹内。

Download a Chrome from the Internet: https://www.google.com/chrome/, and then put them into this folder, with name format of the following:

chrome_win32/ # for windows x32
chrome_win64/ # for windows x64
chrome_linux64/ # for linux x64
chrome_mac64/ # for mac x64

Then, download the corresponding chromedriver from the Internet on this page: https://chromedriver.chromium.org/downloads, note the chromedriver version must match your chrome version!!! And put them into corresponding chrome folder, with name format of the following:

chromedriver_win32.exe # for windows x32
chromedriver_win64.exe # for windows x64
chromedriver_linux64 # for linux x64
chromedriver_mac64 # for mac x64

For example, if you want to build this software on Windows x64 platform, then you should first download a Chrome for Windows x64, then copy the whole chrome folder to this ElectronJS folder and rename the folder to chrome_win64, assume the Chrome version you downloaded is 110; then, download a chromedriver.exe with version 110 for Windows x64, and put it into the chrome_win64 folder, then rename it to chromedriver_win64.exe.

Finally, copy the stealth.min.js and execute.bat (for Windows x64) file in this folder to these chrome folders.

NodeJS环境|NodeJS Environment

  1. Windows环境下需要先安装VS Build Tools 2017 （https://aka.ms/vs/15/release/vs_buildtools.exe）的Visual C++ Build Tools组件，不然下面的命令无法执行，其他系统不需要。
  2. 安装NodeJS：https://nodejs.org/zh-cn/download/。
  3. 运行下面的命令来安装依赖：
npm install
npm install @electron-forge/cli -g

如果上面的命令运行速度很慢可以参考NodeJS换源说明：https://blog.csdn.net/qq_23211463/article/details/123769061。

  1. On Windows, you need to install VS Build Tools 2017 (https://aka.ms/vs/15/release/vs_buildtools.exe, select and install the Visual C++ Build Tools component) first for node-gyp to install node-windows-manager (No need for other OS).
  2. Install NodeJS: https://nodejs.org/en/download/.
  3. Run the following commands to install NodeJS packages:
npm install
npm install @electron-forge/cli -g

运行说明|Run Instruction

在当前文件夹执行以下命令即可在开发模式下运行程序：

npm run start_direct

但到此为止只能设计任务，不能执行任务，想要执行任务还需要完成ExecuteStage文件夹下的执行任务程序的编译说明才可以执行。

Run the software in developing mode:

npm run start_direct

But so far can only design the task, can not execute the task, want to execute the task also need to complete the 'ExecuteStage' folder of the execution of the task program compilation instructions can be executed.

打包发布说明|Package Instruction

打包发布前，确保执行阶段程序easyspider_executestage(.exe)已放入chrome(_win64)文件夹内，且浏览器插件EasySpider_zh.crx已经是最新版本。

执行下面的命令即可打包：

npx electron-forge import
npm run package

Before packaging and releasing, make sure that the task execution program easyspider_executestage(.exe) is placed inside the chrome(_win64) folder and that the browser extension EasySpider_en.crx is the latest version.

After finishing developing, package software by the following command:

npx electron-forge import
npm run package

For windows x64

依次执行下面两个cmd即可打包并发布，无需执行上面的npm命令，其他系统同理。

package_win64.cmd
clean_and_release_win64.cmd

Execute the following two CMD commands sequentially to package and publish the program. There is no need to execute the previous npm command. The process is similar for other systems.

package_win64.cmd
clean_and_release_win64.cmd

（可选）编译成安装包|(Optional) Compile to an installation package

npm run make