-
Notifications
You must be signed in to change notification settings - Fork 167
Pymesh online software update doesn't work after site update #595
Comments
Yes, you can use this guide : doc link |
Thank you sir, |
I first of all format and install the firmware using the appropriate tool (pycom firmware update), then I do the ota update as explained in the documentation |
I try to explain you by points, but the process I found is quite long
This process is very inconvenient, but it works. Unfortunately it doesn't generate the pymesh configuration file, I found a way to do that too, but if you have old files I recommend using those. |
(sysname='FiPy', nodename='FiPy', release='1.20.2.r6', version='v1.11-c5a0a97 on 2021-10-28', machine='FiPy with ESP32', lorawan='1.0.2', sigfox='1.0.1', pybytes='1.7.1')
Normally after the Pymesh firmware became 1.20.2.rc11, the Pymesh library is installed, and at reboot the device started automatically the LoRa Mesh network.
Now nothing changes.
Update Output:
Even after the update all the pymesh modules do not work
The text was updated successfully, but these errors were encountered: