You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi,when I use this experimental condition, after one battery reaches the lower cut-off voltage, it will not be charged and the simulation will be terminated. I think the experimental condition should be modified so that one of the batteries reaches the cut-off voltage before switching to charging or discharging, but I don't quite understand how to write such a code. I would be very grateful if you can provide help!
I_mag = 30.0
OCV_init = 4 # used for intial guess
Ri_init = 5e-2 # used for intial guess
R_busbar = 1.5e-3
R_connection = 1e-2
Np = 4
Ns = 1
Nbatt = Np * Ns
netlist = lp.setup_circuit(Np=Np, Ns=Ns, Rb=R_busbar, Rc=R_connection, Ri=Ri_init, V=3.5, I=I_mag)
cycle_number = 100
experiment = pybamm.Experiment(
["Discharge at 20 A for 60 minutes", "Rest for 10 minutes", "Charge at 20 A for 60 minutes", "Rest for 10 minutes"]*1,
period="1 seconds",)
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hi,when I use this experimental condition, after one battery reaches the lower cut-off voltage, it will not be charged and the simulation will be terminated. I think the experimental condition should be modified so that one of the batteries reaches the cut-off voltage before switching to charging or discharging, but I don't quite understand how to write such a code. I would be very grateful if you can provide help!
I_mag = 30.0
OCV_init = 4 # used for intial guess
Ri_init = 5e-2 # used for intial guess
R_busbar = 1.5e-3
R_connection = 1e-2
Np = 4
Ns = 1
Nbatt = Np * Ns
netlist = lp.setup_circuit(Np=Np, Ns=Ns, Rb=R_busbar, Rc=R_connection, Ri=Ri_init, V=3.5, I=I_mag)
cycle_number = 100
experiment = pybamm.Experiment(
["Discharge at 20 A for 60 minutes", "Rest for 10 minutes", "Charge at 20 A for 60 minutes", "Rest for 10 minutes"]*1,
period="1 seconds",)
Beta Was this translation helpful? Give feedback.
All reactions