Home

Welcome to the PSMoveService wiki!

#Getting a build

• Prebuilt Releases
• Building from source

#Initial Setup The following sections outline how to setup the PSMoveService for use on Win10 or OS X.

1. Hardware-Purchase-List
2. Camera-Hardware-Setup
3. HMD Config
4. PSEye-Software-Setup-(Windows)

• No setup necessary for OS X or Linux

5. PSMove Bluetooth Pairing
6. PSMove Magnetometer Calibration
7. Color Filter Calibration
8. Tracker Pose Calibration
9. Steam VR Setup

#Troubleshooting Troubleshooting-(Windows)

Programmer's Notes

PSMoveService:-Programmer's-Notes

ClientPSMoveAPI:-Programmer's-notes

PSMoveProtocol

Alex's Notes on the PSMove HID Protocol

#Attribution Special thanks to the following people who helped make this project possible:

• Thomas Perl and his psmoveapi project which laid the groundwork for this project.
• Alexander Nitch and his work on psmove-pair-win that enabled psmove controller pairing over Bluetooth on Windows. Alex also did nearly all of the investigation into the PSMove communication protocol.
• Eugene Zatepyakin and his PS3EYEDriver project which enabled access to the PS3Eye camera.
• Ritesh Oedayrajsingh Varma and his work on PS3EYEDriver enabling improved camera polling performance (consistent 60fps)
• Frédéric Lopez and his work on PS-Move-Setup that enabled co registration of and HMD with the PSMove.