We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Describe the bug: When going to BLE -> Media Cmds for the second time - my firmware crashed
Steps To Reproduce: Go to BLE -> Media Cmds
Actual behavior: Firmware crash
Additional context / logs: D NimBLEAdvertising: << Advertising start D NimBLECharacteristic: >> setValue: length=1, data=62, characteristic UUID=0x2a19 D NimBLECharacteristic: << setValue [156307][D][BleKeyboard.cpp:150] begin(): [] Advertising started! [165501][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13 [169359][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255 unsupported serial command: improv����� failed: IMPROV����� $ Selected: Media Cmds D NimBLEAdvertising: >> stop D NimBLEAdvertising: << stop D NimBLEService: >> start(): Starting service: UUID: 0x180a, handle: 0x0031 D NimBLEService: Adding 2 characteristics for service UUID: 0x180a, handle: 0x0031 D NimBLEService: << start() D NimBLEService: >> start(): Starting service: UUID: 0x1812, handle: 0x0036 D NimBLEService: Adding 7 characteristics for service UUID: 0x1812, handle: 0x0036 D NimBLEService: << start() D NimBLEService: >> start(): Starting service: UUID: 0x180f, handle: 0x004a D NimBLEService: Adding 1 characteristics for service UUID: 0x180f, handle: 0x004a D NimBLEService: << start() D NimBLEService: >> start(): Starting service: UUID: 0x180a, handle: 0x0031 D NimBLEService: Adding 2 characteristics for service UUID: 0x180a, handle: 0x0031 D NimBLEService: << start() D NimBLEService: >> start(): Starting service: UUID: 0x1812, handle: 0x0036 D NimBLEService: Adding 7 characteristics for service UUID: 0x1812, handle: 0x0036 D NimBLEService: << start() D NimBLEService: >> start(): Starting service: UUID: 0x180f, handle: 0x004a D NimBLEService: Adding 1 characteristics for service UUID: 0x180f, handle: 0x004a D NimBLEService: << start() Guru Meditation Error: Core 1 panic'ed (LoadStoreError). Exception was unhandled.
Core 1 register dump: PC : 0x420b8d96 PS : 0x00060c30 A0 : 0x820b2c58 A1 : 0x3fceb9a0 A2 : 0x3fceba04 A3 : 0x420aa918 A4 : 0x00000006 A5 : 0x00000006 A6 : 0x00000000 A7 : 0x0000000d A8 : 0x00000010 A9 : 0x3fceb990 A10 : 0x00000009 A11 : 0x3c2a3d71 A12 : 0x00000006 A13 : 0x3fceb5c0 A14 : 0x00000006 A15 : 0x3fceb7c0 SAR : 0x00000008 EXCCAUSE: 0x00000003 EXCVADDR: 0x420aa918 LBEG : 0x40056f5c LEND : 0x40056f72 LCOUNT : 0x00000000
Backtrace: 0x420b8d93:0x3fceb9a0 0x420b2c55:0x3fceb9c0 0x420b37c1:0x3fceb9e0 0x420acbce:0x3fceba00 0x420acc96:0x3fceba40 0x420acd37:0x3fcebaa0 0x420ac5ef:0x3fcebb00 0x420ac61d:0x3fcebb20 0x420ac6aa:0x3fcebb40 0x4223b3c8:0x3fcebb80 0x42112e89:0x3fcebbc0 0x42037a0e:0x3fcebc10 0x42010aa3:0x3fcebf30 0x4200e6e1:0x3fcebf50 0x42010f01:0x3fcebfc0 0x4225f6cd:0x3fcec040 0x42031b21:0x3fcec060 0x421285e4:0x3fcec110
ELF file SHA256: edcadfc91292a303
Rebooting... ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0xa (SPI_FAST_FLASH_BOOT) Saved PC:0x4226a6fa SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3808,len:0x4bc load:0x403c9700,len:0xbd8 load:0x403cc700,len:0x2a0c entry 0x403c98d0 [ 614][D][esp32-hal-tinyusb.c:680] tinyusb_enable_interface(): Interface HID enabled [ 622][D][USBHID.cpp:61] tinyusb_enable_hid_device(): Device[0] len: 79 [ 629][D][USBHID.cpp:61] tinyusb_enable_hid_device(): Device[1] len: 67 E (655) esp_ota_ops: not found otadata [ 656][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled [ 683][D][main.cpp:298] setup(): Total heap: 253248 [ 688][D][main.cpp:299] setup(): Free heap: 218280 [ 692][D][main.cpp:300] setup(): PSRAM Started [ 697][D][main.cpp:301] setup(): PSRAM Found [ 701][D][main.cpp:303] setup(): Total PSRAM: 8386215 [ 706][D][main.cpp:304] setup(): Free PSRAM: 8381855 [ 711][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=8 scl=18 freq=100000 [ 720][I][XPowersCommon.tpp:445] begin(): SDA:8 SCL:18 [ 725][W][Wire.cpp:301] begin(): Bus already started in Master Mode. getInputCurrentLimit: 3250 mA getChargerConstantCurr: 832 mA [ 1323][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1428][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1534][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1640][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 1646][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed [ 1652][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work [ 1661][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1767][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1873][W][sd_diskio.cpp:174] sdCommand(): no token received [ 1979][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 1986][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2092][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2198][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2304][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 2310][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed [ 2316][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work [ 2325][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2431][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2537][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2643][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 2716][I][config.cpp:176] fromFile(): Using config from file [ 2723][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2829][W][sd_diskio.cpp:174] sdCommand(): no token received [ 2935][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3041][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 3047][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed [ 3053][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work [ 3062][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3168][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3274][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3380][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 3453][I][config.cpp:176] fromFile(): Using config from file [ 3471][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255 { "priColor": "a80f", "secColor": "880f", "bgColor": "0", "rot": 3, "dimmerSet": 10, "bright": 100, "tmz": 0, "soundEnabled": 1, "wifiAtStartup": 0, "ledBright": 75, "ledColor": "0", "webUI": { "user": "admin", "pwd": "bruce" }, "wifiAp": { "ssid": "BruceNet", "pwd": "brucenet" }, "wifi": { "moto g(60)_3121": "Barmen12" }, "irTx": 2, "irRx": 1, "rfTx": 8, "rfRx": 18, "rfModule": 1, "rfFreq": 433.92, "rfFxdFreq": 0, "rfScanRange": 3, "rfidModule": 1, "mifareKeys": [], "gpsBaudrate": 9600, "startupApp": "", "wigleBasicToken": "", "devMode": 0, "disabledMenus": [], "qrCodes": [ { "menuName": "Bruce AP", "content": "WIFI:T:WPA;S:BruceNet;P:brucenet;;" }, { "menuName": "Bruce Wiki", "content": "https://github.com/pr3y/Bruce/wiki" }, { "menuName": "Bruce Site", "content": "https://bruce.computer" }, { "menuName": "Rickroll", "content": "https://youtu.be/dQw4w9WgXcQ" } ] }[ 3519][I][config.cpp:195] saveFile(): config file written successfully [ 3562][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3668][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3774][W][sd_diskio.cpp:174] sdCommand(): no token received [ 3880][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 3886][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed [ 3892][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work [ 3901][W][sd_diskio.cpp:174] sdCommand(): no token received [ 4007][W][sd_diskio.cpp:174] sdCommand(): no token received [ 4113][W][sd_diskio.cpp:174] sdCommand(): no token received [ 4219][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 E (4226) rmt: rmt_set_gpio(530): RMT CHANNEL ERR E (4226) rmt: rmt_config(686): set gpio for RMT driver failed E (4226) rmt: rmt_set_gpio(530): RMT CHANNEL ERR E (4229) rmt: rmt_config(686): set gpio for RMT driver failed [ 4239][E][vfs_api.cpp:113] exists(): File system is not mounted [ 4253][E][vfs_api.cpp:105] open(): /littlefs/boot.jpg does not exist, no permits for creation [ 4261][E][vfs_api.cpp:113] exists(): File system is not mounted [ 4268][E][vfs_api.cpp:105] open(): /littlefs/boot.gif does not exist, no permits for creation [ 10636][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13 [ 11363][E][vfs_api.cpp:113] exists(): File system is not mounted [ 11370][E][vfs_api.cpp:105] open(): /littlefs/boot.wav does not exist, no permits for creation [ 11579][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255 [ 11810][W][sd_diskio.cpp:174] sdCommand(): no token received [ 11916][W][sd_diskio.cpp:174] sdCommand(): no token received [ 12022][W][sd_diskio.cpp:174] sdCommand(): no token received [ 12128][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 12134][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed [ 12140][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work [ 12149][W][sd_diskio.cpp:174] sdCommand(): no token received [ 12255][W][sd_diskio.cpp:174] sdCommand(): no token received [ 12361][W][sd_diskio.cpp:174] sdCommand(): no token received [ 12467][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00 [ 12548][I][config.cpp:176] fromFile(): Using config from file [ 21584][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Describe the bug:
When going to BLE -> Media Cmds for the second time - my firmware crashed
Steps To Reproduce:
Go to BLE -> Media Cmds
LilyGo T-Embed CC1101 ESP32-S3
Expected behavior:
Normal work
Actual behavior:
Firmware crash
Additional context / logs:
D NimBLEAdvertising: << Advertising start
D NimBLECharacteristic: >> setValue: length=1, data=62, characteristic UUID=0x2a19
D NimBLECharacteristic: << setValue
[156307][D][BleKeyboard.cpp:150] begin(): [] Advertising started!
[165501][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13
[169359][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255
unsupported serial command: improv�����
failed: IMPROV�����
$ Selected: Media Cmds
D NimBLEAdvertising: >> stop
D NimBLEAdvertising: << stop
D NimBLEService: >> start(): Starting service: UUID: 0x180a, handle: 0x0031
D NimBLEService: Adding 2 characteristics for service UUID: 0x180a, handle: 0x0031
D NimBLEService: << start()
D NimBLEService: >> start(): Starting service: UUID: 0x1812, handle: 0x0036
D NimBLEService: Adding 7 characteristics for service UUID: 0x1812, handle: 0x0036
D NimBLEService: << start()
D NimBLEService: >> start(): Starting service: UUID: 0x180f, handle: 0x004a
D NimBLEService: Adding 1 characteristics for service UUID: 0x180f, handle: 0x004a
D NimBLEService: << start()
D NimBLEService: >> start(): Starting service: UUID: 0x180a, handle: 0x0031
D NimBLEService: Adding 2 characteristics for service UUID: 0x180a, handle: 0x0031
D NimBLEService: << start()
D NimBLEService: >> start(): Starting service: UUID: 0x1812, handle: 0x0036
D NimBLEService: Adding 7 characteristics for service UUID: 0x1812, handle: 0x0036
D NimBLEService: << start()
D NimBLEService: >> start(): Starting service: UUID: 0x180f, handle: 0x004a
D NimBLEService: Adding 1 characteristics for service UUID: 0x180f, handle: 0x004a
D NimBLEService: << start()
Guru Meditation Error: Core 1 panic'ed (LoadStoreError). Exception was unhandled.
Core 1 register dump:
PC : 0x420b8d96 PS : 0x00060c30 A0 : 0x820b2c58 A1 : 0x3fceb9a0
A2 : 0x3fceba04 A3 : 0x420aa918 A4 : 0x00000006 A5 : 0x00000006
A6 : 0x00000000 A7 : 0x0000000d A8 : 0x00000010 A9 : 0x3fceb990
A10 : 0x00000009 A11 : 0x3c2a3d71 A12 : 0x00000006 A13 : 0x3fceb5c0
A14 : 0x00000006 A15 : 0x3fceb7c0 SAR : 0x00000008 EXCCAUSE: 0x00000003
EXCVADDR: 0x420aa918 LBEG : 0x40056f5c LEND : 0x40056f72 LCOUNT : 0x00000000
Backtrace: 0x420b8d93:0x3fceb9a0 0x420b2c55:0x3fceb9c0 0x420b37c1:0x3fceb9e0 0x420acbce:0x3fceba00 0x420acc96:0x3fceba40 0x420acd37:0x3fcebaa0 0x420ac5ef:0x3fcebb00 0x420ac61d:0x3fcebb20 0x420ac6aa:0x3fcebb40 0x4223b3c8:0x3fcebb80 0x42112e89:0x3fcebbc0 0x42037a0e:0x3fcebc10 0x42010aa3:0x3fcebf30 0x4200e6e1:0x3fcebf50 0x42010f01:0x3fcebfc0 0x4225f6cd:0x3fcec040 0x42031b21:0x3fcec060 0x421285e4:0x3fcec110
ELF file SHA256: edcadfc91292a303
Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xa (SPI_FAST_FLASH_BOOT)
Saved PC:0x4226a6fa
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
[ 614][D][esp32-hal-tinyusb.c:680] tinyusb_enable_interface(): Interface HID enabled
[ 622][D][USBHID.cpp:61] tinyusb_enable_hid_device(): Device[0] len: 79
[ 629][D][USBHID.cpp:61] tinyusb_enable_hid_device(): Device[1] len: 67
E (655) esp_ota_ops: not found otadata
[ 656][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
[ 683][D][main.cpp:298] setup(): Total heap: 253248
[ 688][D][main.cpp:299] setup(): Free heap: 218280
[ 692][D][main.cpp:300] setup(): PSRAM Started
[ 697][D][main.cpp:301] setup(): PSRAM Found
[ 701][D][main.cpp:303] setup(): Total PSRAM: 8386215
[ 706][D][main.cpp:304] setup(): Free PSRAM: 8381855
[ 711][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=8 scl=18 freq=100000
[ 720][I][XPowersCommon.tpp:445] begin(): SDA:8 SCL:18
[ 725][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
getInputCurrentLimit: 3250 mA
getChargerConstantCurr: 832 mA
[ 1323][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1428][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1534][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1640][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 1646][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
[ 1652][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
[ 1661][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1767][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1873][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 1979][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 1986][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2092][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2198][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2304][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 2310][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
[ 2316][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
[ 2325][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2431][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2537][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2643][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 2716][I][config.cpp:176] fromFile(): Using config from file
[ 2723][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2829][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 2935][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3041][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 3047][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
[ 3053][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
[ 3062][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3168][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3274][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3380][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 3453][I][config.cpp:176] fromFile(): Using config from file
[ 3471][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255
{
"priColor": "a80f",
"secColor": "880f",
"bgColor": "0",
"rot": 3,
"dimmerSet": 10,
"bright": 100,
"tmz": 0,
"soundEnabled": 1,
"wifiAtStartup": 0,
"ledBright": 75,
"ledColor": "0",
"webUI": {
"user": "admin",
"pwd": "bruce"
},
"wifiAp": {
"ssid": "BruceNet",
"pwd": "brucenet"
},
"wifi": {
"moto g(60)_3121": "Barmen12"
},
"irTx": 2,
"irRx": 1,
"rfTx": 8,
"rfRx": 18,
"rfModule": 1,
"rfFreq": 433.92,
"rfFxdFreq": 0,
"rfScanRange": 3,
"rfidModule": 1,
"mifareKeys": [],
"gpsBaudrate": 9600,
"startupApp": "",
"wigleBasicToken": "",
"devMode": 0,
"disabledMenus": [],
"qrCodes": [
{
"menuName": "Bruce AP",
"content": "WIFI:T:WPA;S:BruceNet;P:brucenet;;"
},
{
"menuName": "Bruce Wiki",
"content": "https://github.com/pr3y/Bruce/wiki"
},
{
"menuName": "Bruce Site",
"content": "https://bruce.computer"
},
{
"menuName": "Rickroll",
"content": "https://youtu.be/dQw4w9WgXcQ"
}
]
}[ 3519][I][config.cpp:195] saveFile(): config file written successfully
[ 3562][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3668][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3774][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 3880][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 3886][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
[ 3892][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
[ 3901][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 4007][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 4113][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 4219][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
E (4226) rmt: rmt_set_gpio(530): RMT CHANNEL ERR
E (4226) rmt: rmt_config(686): set gpio for RMT driver failed
E (4226) rmt: rmt_set_gpio(530): RMT CHANNEL ERR
E (4229) rmt: rmt_config(686): set gpio for RMT driver failed
[ 4239][E][vfs_api.cpp:113] exists(): File system is not mounted
[ 4253][E][vfs_api.cpp:105] open(): /littlefs/boot.jpg does not exist, no permits for creation
[ 4261][E][vfs_api.cpp:113] exists(): File system is not mounted
[ 4268][E][vfs_api.cpp:105] open(): /littlefs/boot.gif does not exist, no permits for creation
[ 10636][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13
[ 11363][E][vfs_api.cpp:113] exists(): File system is not mounted
[ 11370][E][vfs_api.cpp:105] open(): /littlefs/boot.wav does not exist, no permits for creation
[ 11579][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 255
[ 11810][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 11916][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 12022][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 12128][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 12134][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
[ 12140][E][sd_diskio.cpp:806] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
[ 12149][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 12255][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 12361][W][sd_diskio.cpp:174] sdCommand(): no token received
[ 12467][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
[ 12548][I][config.cpp:176] fromFile(): Using config from file
[ 21584][V][esp32-hal-ledc.c:231] analogWrite(): GPIO 21 - Using Channel 7, Value = 13
The text was updated successfully, but these errors were encountered: