From de5648ce9e328642012160ca6431eb61ebd88ae4 Mon Sep 17 00:00:00 2001
From: Hel Gibbons <50950368+helgibbons@users.noreply.github.com>
Date: Tue, 24 Dec 2024 16:47:58 +0000
Subject: [PATCH] Update buttons.py

---
 examples/7color/buttons.py | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/examples/7color/buttons.py b/examples/7color/buttons.py
index c699b4d..2a201a5 100755
--- a/examples/7color/buttons.py
+++ b/examples/7color/buttons.py
@@ -4,7 +4,8 @@
 import gpiodevice
 from gpiod.line import Bias, Direction, Edge
 
-print("""buttons.py - Detect which button has been pressed
+print(
+    """buttons.py - Detect which button has been pressed
 
 This example should demonstrate how to:
  1. set up gpiod to read buttons,
@@ -12,13 +13,21 @@
 
 Press Ctrl+C to exit!
 
-""")
+"""
+)
 
 # GPIO pins for each button (from top to bottom)
 # These will vary depending on platform and the ones
 # below should be correct for Raspberry Pi 5.
-# Run "gpioinfo" to find out what yours might be
-BUTTONS = ["PIN29", "PIN31", "PIN36", "PIN18"]
+# Run "gpioinfo" to find out what yours might be.
+#
+# Raspberry Pi 5 Header pins used by Inky Impression:
+#    PIN29, PIN31, PIN36, PIN18.
+# These header pins correspond to BCM GPIO numbers:
+#    GPIO05, GPIO06, GPIO16, GPIO24.
+# These GPIO numbers are what is used below and not the
+# header pin numbers.
+BUTTONS = [5, 6, 16, 24]
 
 # These correspond to buttons A, B, C and D respectively
 LABELS = ["A", "B", "C", "D"]
@@ -39,13 +48,14 @@
 # Request the lines, *whew*
 request = chip.request_lines(consumer="inky7-buttons", config=line_config)
 
+
 # "handle_button" will be called every time a button is pressed
 # It receives one argument: the associated gpiod event object.
 def handle_button(event):
     index = OFFSETS.index(event.line_offset)
-    pin = BUTTONS[index]
+    gpio_number = BUTTONS[index]
     label = LABELS[index]
-    print(f"Button press detected on pin: {pin} label: {label}")
+    print(f"Button press detected on GPIO #{gpio_number} label: {label}")
 
 
 while True: