Simple AF

I AM NOT RESPONSIBLE FOR DAMAGE TO YOUR PRINTER - INSTALLING CUSTOM FIRMWARE IS A RISK

The Simple AF project is for anyone who wants to use a different probe with their K1, K1C or K1 Max and use vanilla klipper and no Creality Gcode.

This project supports the following probes:

• Microprobe
• BLTouch, 3dTouch, CrTouch
• Cartographer
• BTT Eddy

Installation

There is a separate guide for each probe

• If you have a Microprobe, follow the Microprobe guide

• If you have a BLTouch, 3dtouch or Crtouch follow the Bltouch guide

• If you have a Cartographer follow the Cartographer guide

• If you have a BTT Eddy, follow the BTT Eddy guide

Other Projects

If you wish to keep using the nozzle for leveling and z-offset, this is not the guide you are looking for!

If you want to use your strain guages but not prtouch, then check this out instead: https://github.com/cryoz/K1_tenso_manual/blob/main/README_ENG.md

If you wish to use the Guilouz Helper script, this guide is not the guide you are looking for! The Guilouz Helper and Creality scripts for Mainsail and Fluid are not compatible with this project.

The Details

The installation script will perform the following steps:

• Disable creality services
• Install Emergency Factory Reset feature
• Install Bash
• Replace Creality cam_app and old mjpg_streamer with entware mjpg_streamer
• Install Moonraker
• Install Moonraker Timelapse - no longer enabled by default
• Install Nginx
• Install Fluidd and Fluidd Config
• Install Mainsail
• Install KAMP
• Install Vanilla Klipper
• Install Guppyscreen
• Setup bltouch/crtouch/3dtouch, Microprobe, Cartographer or Btt Eddy