Skip to content

Latest commit

 

History

History
323 lines (208 loc) · 8.64 KB

INSTALL.rst

File metadata and controls

323 lines (208 loc) · 8.64 KB
Raw

Installation

The project is developed in Python using the Django framework. There are 3 sections below, focussing on developers, running the project using Docker and hints for running the project in production.

Development

Prerequisites

You need the following libraries and/or programs:

Getting started

Developers can follow the following steps to set up the project on their local development machine.

  1. Navigate to the location where you want to place your project.

  2. Get the code:

    $ git clone [email protected]:VNG-Realisatie/VNG-referentielijsten.git
$ cd vrl

  3. Install all required libraries. Tip: You can use the bootstrap.py script to install the requiments and set the proper settings in manage.py. Or, perform the steps manually:

    $ virtualenv env
$ source env/bin/activate
$ pip install -r requirements/dev.txt

  4. Install the front-end CLI tool gulp if you've never installed them before and install the frontend libraries:

    $ npm install -g gulp
$ npm install
$ gulp sass

  5. Activate your virtual environment and create the statics and database:

    $ source env/bin/activate
$ python src/manage.py collectstatic --link
$ python src/manage.py migrate

  6. Create a superuser to access the management interface:

    $ python src/manage.py createsuperuser

  7. You can now run your installation and point your browser to the address given by this command:

    $ python src/manage.py runserver

Note: If you are making local, machine specific, changes, add them to src/vrl/conf/local.py. You can base this file on the example file included in the same directory.

Note: You can run watch-tasks to compile Sass to CSS and ECMA to JS using gulp. By default this will compile the files if they change.

Update installation

When updating an existing installation:

  1. Activate the virtual environment:

    $ cd vrl
$ source env/bin/activate

  2. Update the code and libraries:

    $ git pull
$ pip install -r requirements/dev.txt
$ npm install
$ gulp sass

  3. Update the statics and database:

    $ python src/manage.py collectstatic --link
$ python src/manage.py migrate

Testsuite

To run the test suite:

$ python src/manage.py test vrl

Configuration via environment variables

A number of common settings/configurations can be modified by setting environment variables. You can persist these in your local.py settings file or as part of the (post)activate of your virtualenv.

  • SECRET_KEY: the secret key to use. A default is set in dev.py
  • DB_NAME: name of the database for the project. Defaults to vrl.
  • DB_USER: username to connect to the database with. Defaults to vrl.
  • DB_PASSWORD: password to use to connect to the database. Defaults to vrl.
  • DB_HOST: database host. Defaults to localhost
  • DB_PORT: database port. Defaults to 5432.
  • SENTRY_DSN: the DSN of the project in Sentry. If set, enabled Raven as logger and will send errors/logging to Sentry. If unset, Raven will be disabled.

Docker

The easiest way to get the project started is by using Docker Compose.

  1. Clone or download the code from Github in a folder like vrl:

    $ git clone [email protected]:maykinmedia/vng-referentielijsten.git
Cloning into 'vng-referentielijsten'...
...

$ cd vng-referentielijsten

  2. Start the database and web services:

    $ docker-compose up -d
Starting vng-referentielijsten_db_1 ... done
Starting vng-referentielijsten_web_1 ... done

    It can take a while before everything is done. Even after starting the web container, the database might still be migrating. You can always check the status with:

    $ docker logs -f vng-referentielijsten_web_1

  3. Create an admin user and load initial data. If different container names are shown above, use the container name ending with _web_1:

    $ docker exec -it vng-referentielijsten_web_1 /app/src/manage.py createsuperuser
Username: admin
...
Superuser created successfully.

$ docker exec -it vng-referentielijsten_web_1 /app/src/manage.py loaddata admin_index groups
Installed 5 object(s) from 2 fixture(s)

  4. Point your browser to http://localhost:8000/ to access the project's management interface with the credentials used in step 3.

    If you are using Docker Machine, you need to point your browser to the Docker VM IP address. You can get the IP address by doing docker-machine ls and point your browser to http://<ip>:8000/ instead (where the <ip> is shown below the URL column):

    $ docker-machine ls
NAME      ACTIVE   DRIVER       STATE     URL
default   *        virtualbox   Running   tcp://<ip>:<port>

  5. To shutdown the services, use docker-compose down and to clean up your system you can run docker system prune.

More Docker

If you just want to run the project as a Docker container and connect to an external database, you can build and run the Dockerfile and pass several environment variables. See src/vrl/conf/docker.py for all settings.

$ docker build -t vrl
$ docker run \
    -p 8000:8000 \
    -e DATABASE_USERNAME=... \
    -e DATABASE_PASSWORD=... \
    -e DATABASE_HOST=... \
    --name vrl \
    vrl

$ docker exec -it vrl /app/src/manage.py createsuperuser

Building and publishing the image

Using bin/release-docker-image, you can easily build and tag the image.

The script is based on git branches and tags - if you're on the master branch and the current HEAD is tagged, the tag will be used as RELEASE_TAG and the image will be pushed. If you want to push the image without a git tag, you can use the RELEASE_TAG envvar.

The image will only be pushed if the JOB_NAME envvar is set. The image will always be built, even if no envvar is set. The default release tag is latest.

Example usage:

JOB_NAME=publish RELEASE_TAG=dev ./bin/release-docker-image.sh

Staging and production

Ansible is used to deploy test, staging and production servers. It is assumed the target machine has a clean Debian installation.

  1. Make sure you have Ansible installed (globally or in the virtual environment):

    $ pip install ansible

  2. Navigate to the project directory, and install the Maykin deployment submodule if you haven't already:

    $ git submodule update --init

  3. Run the Ansible playbook to provision a clean Debian machine:

    $ cd deployment
$ ansible-playbook <test/staging/production>.yml

For more information, see the README file in the deployment directory.

Settings

All settings for the project can be found in src/vrl/conf. The file local.py overwrites settings from the base configuration.

Commands

Commands can be executed using:

$ python src/manage.py <command>

There are no specific commands for the project. See Django framework commands for all default commands, or type python src/manage.py --help.