-
Notifications
You must be signed in to change notification settings - Fork 35
opx show global switch
Amy Buck edited this page Dec 20, 2018
·
21 revisions
opx-show-global-switch
— Display configuration and switch status
opx-show-global-switch [-h,--help]
This command prints the current configuration and status of switch element.
-h,--help
: Print help text.
ACL entry max priority
: The maximum priority of an ACL table entry.
ACL entry min priority
: The minimum priority of an ACL table entry.
ACL table max priority
: The maximum priority of an ACL table.
ACL table min priority
: The minimum priority of an ACL table.
Admin status
: Admin status.
Bridge table size
: Bridge table size.
BST enable
: BST enable.
BST tracking mode
: BST tracking mode.
Counter refresh interval
: Counter refresh interval.
Current profile
: The switch profile currently in use.
Deep buffer mode enable
: Deep buffer mode enable.
Default MAC address
: The switch default MAC address.
Default profile
: The switch default profile.
Default VLAN id
: The VLAN to which untagged incoming Ethernet frames are assigned.
Disable default VLAN
: Disable default VLAN.
ECMP group size
: ECMP group size.
ECMP hash algorithm
: ECMP hash algorithm.
ECMP hash fields
: The list of frame/packet fields which are
ECMP hash seed value
: ECMP hash seed value.
ECN ECT threshold enable
: ECN ECT threshold enable.
Egress buffer pool num
: Egress buffer pool number.
Egress flow table size
: Egress flow table size.
Ingress buffer pool num
: Ingress buffer pool number.
Ingress flow table size
: Ingress flow table size.
IPv4 host size
: IPv4 host size.
IPv4 route table size
: IPv4 route table size.
IPv6 extended prefix routes
: IPv6 extended prefix routes.
IPv6 extended prefix routes LPM block size
: IPv6 extended prefix routes LPM block size.
IPv6 host size
: IPv6 host size.
IPv6 route table size
: IPv6 route table size.
L3 nexthop table size
: L3 next-hop table size.
LAG hash algorithm
: LAG hash algorithm.
LAG hash fields
: LAG hash fields.
LAG hash seed value
: LAG has seed value.
MAC address aging timer
: MAC address aging timer.
Max ECMP entry per group
: Maximum ECMP entry per group.
Max IPv6 extended prefix routes
: Maximum IPv6 extended prefix routes.
Max MTU
: Maximum MTU.
Max supported lags
: Maximum supported LAGs.
Max VXLAN overlay nexthops
: Maximum VxLAN overlay next-hops.
Max VXLAN overlay RIFs
: Maximum VxLAN overlay RIFs.
Next profile
: The switch profile that will be used after the next boot.
NPU identifiers
: Networking processing unit identifiers.
Number of multicast queues per port
: Number of multicast queues per port.
Number of queues CPU port
: Number of queues per CPU port.
Number of queues per port
: Number of queues per port.
Number of unicast queues per port
: Number of unicast queues per port.
Operational status
: Operational status.
PFC dl cfg params
: PFC DL configuration parameters.
PFC dld interval range max
: PFC DLD interval range maximum.
PFC dld interval range min
: PFC DLD interval range minimum.
PFC dlr action
: PFC DLR action.
PFC dlr interval range max
: PFC DLR interval range maximum.
PFC dlr interval range min
: PFC DLR interval range minimum.
QoS rate adjust
: Quality of service rate adjustment.
RIF table size
: RIF table size.
Supported profiles
: A list of profiles currently supported.
Switch mode
: Switch mode.
Temperature
: Temperature reading, in degrees Celsius, of the NPU junction sensor.
Total buffer size
: Total buffer size.
UFT mode
: The current UFT (unified forwarding table) mode.
UFT host table size
: UFT host table size.
UFT L2 mac table size
: UFT L2 MAC table size.
UFT L3 route table size
: UFT L3 route table size.
VXLAN riot enable
: VxLAN riot enable.
Note that not all fields are shown on all platforms.
If there is a syntax error in the given arguments, the exit status shall
be 2.
Otherwise, the exit status is 0.
$ opx-show-global-switch
Switch id 0
ACL entry max priority: 2147483647
ACL entry min priority: 0
ACL table max priority: 11
ACL table min priority: 0
Bridge table size: 139264
Counter refresh interval: 5 s
Current profile: profile-1
Default MAC address: 50:9a:4c:d5:ac:f0
Default profile: profile-1
ECMP hash algorithm: crc
ECMP hash seed value: 0
Egress buffer pool num: 4
Ingress buffer pool num: 4
IPv6 extended prefix routes: 0
IPv6 extended prefix routes LPM block size: 1024
LAG hash algorithm: crc
LAG hash seed value: 0
MAC address aging timer: 1800 s
Max ECMP entry per group: 0
Max IPv6 extended prefix routes: 3072
Max MTU: 9216
Next profile: profile-1
Number of multicast queues per port: 10
Number of queues CPU port: 48
Number of queues per port: 20
Number of unicast queues per port: 10
Supported profiles: profile-1 profile-2
Switch mode: store and forward
Temperature: 37 deg. C
Total buffer size: 43008
UFT mode: default
UFT host table size: 139264
UFT L2 mac table size: 139264
UFT L3 route table size: 32768
To report any OPX software bugs, see [Report bugs](https://github.com/open-switch/opx-docs/wiki/Report-bugs(.
© 2019 OpenSwitch project. All information is contributed to and made available by OPX under the Creative Commons Attribution 4.0 International License (available at http://creativecommons.org/licenses/by/4.0/).
- Home
- System overview
- Software releases
- Hardware support
- FAQs
- Install
- Build
- Configure
- Develop
- Administer
- Troubleshoot
- Software compatibility
- Contribute
- DevOps
- Join