-
Notifications
You must be signed in to change notification settings - Fork 35
opx show global switch
opx-show-global-switch
— Displays current configuration and switch status
opx-show-global-switch [-h,--help]
-h,--help
— Print help text
-
ACL entry max priority
— Maximum priority of an ACL table entry -
ACL entry min priority
— Minimum priority of an ACL table entry -
ACL table max priority
— Maximum priority of an ACL table -
ACL table min priority
— Minimum priority of an ACL table -
Admin status
— Administrative status -
Bridge table size
— Bridge table size -
BST enable
— BST enable -
BST tracking mode
— BST tracking mode -
Counter refresh interval
— Counter refresh interval -
Current profile
— Switch profile currently in use -
Deep buffer mode enable
— Deep buffer mode enable -
Default MAC address
— Switch default MAC address -
Default profile
— Switch default profile -
Default VLAN id
— VLAN to which untagged incoming Ethernet frames are assigned -
Disable default VLAN
— Disable default VLAN -
ECMP group size
— ECMP group size -
ECMP hash algorithm
— ECMP hash algorithm -
ECMP hash fields
— List of frame/packet fields which are ECMP hash seed value -
ECN ECT threshold enable
— ECN ECT threshold enable -
Egress buffer pool num
— Egress buffer pool number -
Egress flow table size
— Egress flow table size -
Ingress buffer pool num
— Ingress buffer pool number -
Ingress flow table size
— Ingress flow table size -
IPv4 host size
— IPv4 host size -
IPv4 route table size
— IPv4 route table size -
IPv6 extended prefix routes
— IPv6 extended prefix routes -
IPv6 extended prefix routes LPM block size
— IPv6 extended prefix routes LPM block size -
IPv6 host size
— IPv6 host size -
IPv6 route table size
— IPv6 route table size -
L3 nexthop table size
— L3 next-hop table size -
LAG hash algorithm
— LAG hash algorithm -
LAG hash fields
— LAG hash fields -
LAG hash seed value
— LAG has seed value -
MAC address aging timer
— MAC address aging timer -
Max ECMP entry per group
— Maximum ECMP entry per group -
Max IPv6 extended prefix routes
— Maximum IPv6 extended prefix routes -
Max MTU
— Maximum MTU -
Max supported lags
— Maximum supported LAGs -
Max VXLAN overlay nexthops
— Maximum VxLAN overlay next-hops -
Max VXLAN overlay RIFs
— Maximum VxLAN overlay RIFs -
Next profile
— Switch profile that will be used after the next boot -
NPU identifiers
— Networking processing unit identifiers -
Number of multicast queues per port
— Number of multicast queues per port -
Number of queues CPU port
— Number of queues per CPU port -
Number of queues per port
— Number of queues per port -
Number of unicast queues per port
— Number of unicast queues per port -
Operational status
— Operational status -
PFC dl cfg params
— PFC DL configuration parameters -
PFC dld interval range max
— PFC DLD interval range maximum -
PFC dld interval range min
— PFC DLD interval range minimum
PFC dlr action
: PFC DLR action.
PFC dlr interval range max
: PFC DLR interval range maximum.
PFC dlr interval range min
: PFC DLR interval range minimum.
QoS rate adjust
: Quality of service rate adjustment.
RIF table size
: RIF table size.
Supported profiles
: A list of profiles currently supported.
Switch mode
: Switch mode.
Temperature
: Temperature reading, in degrees Celsius, of the NPU junction sensor.
Total buffer size
: Total buffer size.
UFT mode
: The current UFT (unified forwarding table) mode.
UFT host table size
: UFT host table size.
UFT L2 mac table size
: UFT L2 MAC table size.
UFT L3 route table size
: UFT L3 route table size.
VXLAN riot enable
: VxLAN riot enable.
Note that not all fields are shown on all platforms.
If there is a syntax error in the given arguments, the exit status shall
be 2.
Otherwise, the exit status is 0.
$ opx-show-global-switch
Switch id 0
ACL entry max priority: 2147483647
ACL entry min priority: 0
ACL table max priority: 11
ACL table min priority: 0
Bridge table size: 139264
Counter refresh interval: 5 s
Current profile: profile-1
Default MAC address: 50:9a:4c:d5:ac:f0
Default profile: profile-1
ECMP hash algorithm: crc
ECMP hash seed value: 0
Egress buffer pool num: 4
Ingress buffer pool num: 4
IPv6 extended prefix routes: 0
IPv6 extended prefix routes LPM block size: 1024
LAG hash algorithm: crc
LAG hash seed value: 0
MAC address aging timer: 1800 s
Max ECMP entry per group: 0
Max IPv6 extended prefix routes: 3072
Max MTU: 9216
Next profile: profile-1
Number of multicast queues per port: 10
Number of queues CPU port: 48
Number of queues per port: 20
Number of unicast queues per port: 10
Supported profiles: profile-1 profile-2
Switch mode: store and forward
Temperature: 37 deg. C
Total buffer size: 43008
UFT mode: default
UFT host table size: 139264
UFT L2 mac table size: 139264
UFT L3 route table size: 32768
To report any OPX software bugs, see Report bugs.
© 2019 OpenSwitch project. All information is contributed to and made available by OPX under the Creative Commons Attribution 4.0 International License (available at http://creativecommons.org/licenses/by/4.0/).
- Home
- System overview
- Software releases
- Hardware support
- FAQs
- Install
- Build
- Configure
- Develop
- Administer
- Troubleshoot
- Software compatibility
- Contribute
- DevOps
- Join