opx show global switch

COMMAND

opx-show-global-switch — Displays current configuration and switch status

SYNOPSIS

opx-show-global-switch [-h,--help]

OPTION

-h,--help — Print help text

OUTPUT

Parameter	Description
ACL entry max priority	Maximum priority of an ACL table entry

• ACL entry max priority — Maximum priority of an ACL table entry

• ACL entry min priority — Minimum priority of an ACL table entry

• ACL table max priority — Maximum priority of an ACL table

• ACL table min priority — Minimum priority of an ACL table

• Admin status — Administrative status

• Bridge table size — Bridge table size

• BST enable — BST enable

• BST tracking mode — BST tracking mode

• Counter refresh interval — Counter refresh interval

• Current profile — Switch profile currently in use

• Deep buffer mode enable — Deep buffer mode enable

• Default MAC address — Switch default MAC address

• Default profile — Switch default profile

• Default VLAN id — VLAN to which untagged incoming Ethernet frames are assigned

• Disable default VLAN — Disable default VLAN

• ECMP group size — ECMP group size

• ECMP hash algorithm — ECMP hash algorithm

• ECMP hash fields — List of frame/packet fields which are ECMP hash seed value

• ECN ECT threshold enable — ECN ECT threshold enable

• Egress buffer pool num — Egress buffer pool number

• Egress flow table size — Egress flow table size

• Ingress buffer pool num — Ingress buffer pool number

• Ingress flow table size — Ingress flow table size

• IPv4 host size — IPv4 host size

• IPv4 route table size — IPv4 route table size

• IPv6 extended prefix routes — IPv6 extended prefix routes

• IPv6 extended prefix routes LPM block size — IPv6 extended prefix routes LPM block size

• IPv6 host size — IPv6 host size

• IPv6 route table size — IPv6 route table size

• L3 nexthop table size — L3 next-hop table size

• LAG hash algorithm — LAG hash algorithm

• LAG hash fields — LAG hash fields

• LAG hash seed value — LAG has seed value

• MAC address aging timer — MAC address aging timer

• Max ECMP entry per group — Maximum ECMP entry per group

• Max IPv6 extended prefix routes — Maximum IPv6 extended prefix routes

• Max MTU — Maximum MTU

• Max supported lags — Maximum supported LAGs

• Max VXLAN overlay nexthops — Maximum VxLAN overlay next-hops

• Max VXLAN overlay RIFs — Maximum VxLAN overlay RIFs

• Next profile — Switch profile that will be used after the next boot

• NPU identifiers — Networking processing unit identifiers

• Number of multicast queues per port — Number of multicast queues per port

• Number of queues CPU port — Number of queues per CPU port

• Number of queues per port — Number of queues per port

• Number of unicast queues per port — Number of unicast queues per port

• Operational status — Operational status

• PFC dl cfg params — PFC DL configuration parameters

• PFC dld interval range max — PFC DLD interval range maximum

• PFC dld interval range min — PFC DLD interval range minimum

PFC dlr action

: PFC DLR action.

PFC dlr interval range max

: PFC DLR interval range maximum.

PFC dlr interval range min

: PFC DLR interval range minimum.

QoS rate adjust

: Quality of service rate adjustment.

RIF table size

: RIF table size.

Supported profiles

: A list of profiles currently supported.

Switch mode

: Switch mode.

Temperature

: Temperature reading, in degrees Celsius, of the NPU junction sensor.

Total buffer size

: Total buffer size.

UFT mode

: The current UFT (unified forwarding table) mode.

UFT host table size

: UFT host table size.

UFT L2 mac table size

: UFT L2 MAC table size.

UFT L3 route table size

: UFT L3 route table size.

VXLAN riot enable

: VxLAN riot enable.

Note that not all fields are shown on all platforms.

EXIT STATUS

If there is a syntax error in the given arguments, the exit status shall be 2.
Otherwise, the exit status is 0.

EXAMPLE

$ opx-show-global-switch
Switch id 0
        ACL entry max priority:                     2147483647
        ACL entry min priority:                     0
        ACL table max priority:                     11
        ACL table min priority:                     0
        Bridge table size:                          139264
        Counter refresh interval:                   5 s
        Current profile:                            profile-1
        Default MAC address:                        50:9a:4c:d5:ac:f0
        Default profile:                            profile-1
        ECMP hash algorithm:                        crc
        ECMP hash seed value:                       0
        Egress buffer pool num:                     4
        Ingress buffer pool num:                    4
        IPv6 extended prefix routes:                0
        IPv6 extended prefix routes LPM block size: 1024
        LAG hash algorithm:                         crc
        LAG hash seed value:                        0
        MAC address aging timer:                    1800 s
        Max ECMP entry per group:                   0
        Max IPv6 extended prefix routes:            3072
        Max MTU:                                    9216
        Next profile:                               profile-1
        Number of multicast queues per port:        10
        Number of queues CPU port:                  48
        Number of queues per port:                  20
        Number of unicast queues per port:          10
        Supported profiles:                         profile-1 profile-2
        Switch mode:                                store and forward
        Temperature:                                37 deg. C
        Total buffer size:                          43008
        UFT mode:                                   default
        UFT host table size:                        139264
        UFT L2 mac table size:                      139264
        UFT L3 route table size:                    32768

REPORTING BUGS

To report any OPX software bugs, see Report bugs.

SEE ALSO

opx-config-global-switch