opx config interface

NAME

opx-config-interface — Configure Ethernet interface

SYNOPSIS

opx-config-interface [-h] [--help] 
[--port <port-list>] 
[--autoneg (on | off)] 
[--speed (10M | 100M | 1G | 10G | 25G | 40G | 100G | 20G | 50G | 200G | 400G | 4G-FC | 8G-FC | 16G-FC | 32G-FC | 2G-FC | 64G-FC | 128G-FC | 4G-FC | 1G-FC)] 
[--duplex (half | full)] 
[--fec (auto | off | cl91-rs | cl74-fc | cl108-rs)]

DESCRIPTION

This command sets various attributes of a front-panel Ethernet interface.

OPTIONS

-h,--help

:   Print help text.

--port <port-list>

:   Specify front panel Ethernet interface(s) to configure. A
    <port-list> is a comma-separated list of 1 one more ranges. Each
    range is either a single interface, or a pair of interfaces of the
    form <from..to>, which specifies all interfaces from <from> to
    <to> inclusive. Examples are:

    e101-001-0 - Expands to e101-001-0

    e101-001-0,e101-010-0 - Expands to e101-001-0,e101-010-0

    e101-001-0,e101-004-0..e101-006-0 - Expands to
    e101-001-0,e101-004-0,e101-005-0,e101-006-0

    If the port list is not specified, all Ethernet front-panel ports are
    configured.

--autoneg (on | off)

:   Enable or disable link auto-negotiation.

--speed (10M | 100M | 1G | 10G | 25G | 40G | 100G | 20G | 50G | 200G | 400G | 4G-FC | 8G-FC | 16G-FC | 32G-FC | 2G-FC | 64G-FC | 128G-FC | 4G-FC | 1G-FC)

:   Set interface link speed. This only has effect if link
    auto-negotiation is disabled.

--duplex (half | full)

:   Set link duplex. This only has effect if link auto-negotiation is
    disabled.

--fec (auto | off | cl91-rs | cl74-fc | cl108-rs)

:   Set link forward error correction.

EXIT STATUS

If an invalid port list is specified, the exit status shall be 1.
If there is a syntax error in the given arguments, the exit status shall be 2.
Otherwise, the exit status is 0.

EXAMPLE

$ opx-config-interface --port e101-001-0 --autoneg off --speed 1G --duplex full --fec auto

REPORTING BUGS

To report any OPX software bugs, see Report bugs.

SEE ALSO

opx-show-interface