-
Notifications
You must be signed in to change notification settings - Fork 35
opx config interface
Amy Buck edited this page Dec 20, 2018
·
25 revisions
opx-config-interface
— Configure Ethernet interface
opx-config-interface [-h] [--help] [--port port-list]
[--autoneg (on | off)] [--speed (10M | 100M | 1G | 10G | 25G | 40G | 100G | 20G | 50G
| 200G | 400G | 4G-FC | 8G-FC | 16G-FC | 32G-FC | 2G-FC | 64G-FC | 128G-FC | 4G-FC | 1G-FC)]
[--duplex (half | full)] [--fec (auto | off | cl91-rs | cl74-fc | cl108-rs)]
This command sets various attributes of a front-panel Ethernet interface.
-h,--help
: Print help text.
\--port *port-list*
: Specify front panel Ethernet interface(s) to configure. A
*port-list* is a comma-separated list of 1 one more ranges. Each
range is either a single interface, or a pair of interfaces of the
form *from*..*to*, which specifies all interfaces from *from* to
*to* inclusive. Examples are:
e101-001-0 - Expands to e101-001-0
e101-001-0,e101-010-0 - Expands to e101-001-0,e101-010-0
e101-001-0,e101-004-0..e101-006-0 - Expands to
e101-001-0,e101-004-0,e101-005-0,e101-006-0
If the port list is not specified, all Ethernet front-panel ports are
configured.
\--autoneg ( on \| off )
: Enable or disable link auto-negotiation.
\--speed ( 10M \| 100M \| 1G \| 10G \| 25G \| 40G \| 100G \| 20G \| 50G \| 200G \| 400G \| 4G-FC \| 8G-FC \| 16G-FC \| 32G-FC \| 2G-FC \| 64G-FC \| 128G-FC \| 4G \| 1G-FC )
: Set interface link speed. This only has effect if link
auto-negotiation is disabled.
\--duplex ( half \| full )
: Set link duplex. This only has effect if link auto-negotiation is
disabled.
\--fec ( auto \| off \| cl91-rs \| cl74-fc \| cl108-rs )
: Set link forward error correction.
EXIT STATUS
===========
If an invalid port list is specified, the exit status shall be 1.\
If there is a syntax error in the given arguments, the exit status shall
be 2.\
Otherwise, the exit status is 0.
EXAMPLE
=======
$ opx-config-interface --port e101-001-0 --autoneg off --speed 1G --duplex full --fec auto
REPORTING BUGS
==============
To report any OPX software bugs, please refer to
https://github.com/open-switch/opx-docs/wiki/Report-bugs.
SEE ALSO
========
opx-show-interface(1)
© 2019 OpenSwitch project. All information is contributed to and made available by OPX under the Creative Commons Attribution 4.0 International License (available at http://creativecommons.org/licenses/by/4.0/).
- Home
- System overview
- Software releases
- Hardware support
- FAQs
- Install
- Build
- Configure
- Develop
- Administer
- Troubleshoot
- Software compatibility
- Contribute
- DevOps
- Join