samples: dect_phy: hello_dect: modem 1.1 support

Updates for libmodem 3.0.0 API changes. Adds support for configuring the band group index for using band 4 with the sample. Signed-off-by: Eivind Jølsgard <[email protected]>
nrfconnect · Jan 27, 2025 · 1154e27 · 1154e27
1 parent f4d9d26
commit 1154e27
Show file tree

Hide file tree

Showing 3 changed files with 236 additions and 77 deletions.
diff --git a/samples/dect/dect_phy/hello_dect/Kconfig b/samples/dect/dect_phy/hello_dect/Kconfig
@@ -7,9 +7,35 @@
 config CARRIER
 	int "Carrier to use"
 	default 0
+	range 525 551 if BAND_GROUP_INDEX_1
 	help
 	   The availability of the channels and the exact regulation to use them varies in different countries.
 	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+	   When using band group index 1, you must not use the carriers outside the range of
+	   525 to 551 as they interfere with other radio devices, including LTE devices.
+
+config BAND_GROUP_INDEX_NUM
+	int
+	default 0 if BAND_GROUP_INDEX_0
+	default 1 if BAND_GROUP_INDEX_1
+
+choice BAND_GROUP_INDEX
+	prompt "Band group index"
+	default BAND_GROUP_INDEX_0
+
+config BAND_GROUP_INDEX_0
+	bool "Band group index 0"
+	help
+	   Use RF frequencies operating near 2GHz.
+
+config BAND_GROUP_INDEX_1
+	bool "Band group index 1"
+	help
+	   RF frequencies near 1 GHz.
+	   When using band group index 1, you must not use the carriers outside the range of
+	   525 to 551 as they interfere with other radio devices, including LTE devices.
+
+endchoice
 
 config NETWORK_ID
 	int "Network ID"

diff --git a/samples/dect/dect_phy/hello_dect/README.rst b/samples/dect/dect_phy/hello_dect/README.rst
@@ -55,6 +55,18 @@ CONFIG_CARRIER
    The availability of the channels and the exact regulations for using them vary in different countries.
    See section 5.4.2 of `ETSI TS 103 636-2`_ for the calculation.
 
+.. _CONFIG_BAND_GROUP_INDEX:
+.. _CONFIG_BAND_GROUP_INDEX_0:
+.. _CONFIG_BAND_GROUP_INDEX_1:
+
+CONFIG_BAND_GROUP_INDEX
+   The band group index defines which RF frequencies the modem will operate on.
+   This is configured before the modem is activated.
+   All nRF91 Series devices with DECT NR+ PHY support have support for band index 0.
+   DECT NR+ band 4 (band index 1) is supported by the nRF9151 LACA A0 SiP for research and development evaluation purposes.
+   The nRF9151 LACA A0AB SiP will be qualified for DECT NR+ band 4 support.
+   To select the band group index 0 and 1, enable the :ref:`CONFIG_BAND_GROUP_INDEX_0 <CONFIG_BAND_GROUP_INDEX_0>` and :ref:`CONFIG_BAND_GROUP_INDEX_1 <CONFIG_BAND_GROUP_INDEX_1>`  Kconfig options, respectively.
+
 .. _CONFIG_NETWORK_ID:
 
 CONFIG_NETWORK_ID