From 48cf0785e650f4b036e88e98f166ca06d2868edf Mon Sep 17 00:00:00 2001
From: Piotr Pryga <piotr.pryga@nordicsemi.no>
Date: Sat, 7 Sep 2024 17:00:20 +0200
Subject: [PATCH] samples: bluetooth: peripheral_uart: Add conf build on 54H
 radio core

Add configuration that allows to build the sample application
on the nRF54H20 radio core. That presents possibility to run
BLE firmware and use the nRF54h20 application core for other
purposes.

Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
---
 samples/bluetooth/peripheral_uart/README.rst  |  10 ++
 .../boards/nrf54h20dk_nrf54h20_cpurad.conf    |   8 ++
 .../boards/nrf54h20dk_nrf54h20_cpurad.overlay | 132 ++++++++++++++++++
 3 files changed, 150 insertions(+)
 create mode 100644 samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.conf
 create mode 100644 samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.overlay

diff --git a/samples/bluetooth/peripheral_uart/README.rst b/samples/bluetooth/peripheral_uart/README.rst
index fb7a8b28cc85..696acf936391 100644
--- a/samples/bluetooth/peripheral_uart/README.rst
+++ b/samples/bluetooth/peripheral_uart/README.rst
@@ -177,6 +177,16 @@ Building and running
 
 .. include:: /includes/nRF54H20_erase_UICR.txt
 
+Experimental nRF54H20 SoC radio core only build
+===============================================
+
+The sample can also be built in a configuration that allows it to run on the nRF54H20 SoC radio core only.
+To build the sample with this configuration, use the following command:
+
+.. code-block:: console
+
+   west build -b nrf54h20dk/nrf54h20/cpurad
+
 Experimental Bluetooth Low Energy Remote Procedure Call interface
 =================================================================
 
diff --git a/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.conf b/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.conf
new file mode 100644
index 000000000000..0623953b424b
--- /dev/null
+++ b/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.conf
@@ -0,0 +1,8 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+# Disable the unspupported UART0 driver
+CONFIG_NRFX_UARTE0=n
diff --git a/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.overlay b/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.overlay
new file mode 100644
index 000000000000..705300a720a8
--- /dev/null
+++ b/samples/bluetooth/peripheral_uart/boards/nrf54h20dk_nrf54h20_cpurad.overlay
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+/ {
+	chosen {
+		nordic,nus-uart = &uart135;
+		zephyr,settings_partition = &cpurad_storage_partition;
+	};
+
+	/* LEDs and buttons definitions are required for the DK Buttons and
+	 * LEDs module.
+	 */
+
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		led3 = &led3;
+
+		sw0 = &button0;
+		sw1 = &button1;
+		sw2 = &button2;
+		sw3 = &button3;
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+
+		button0: button_0 {
+			gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "Push button 0";
+			zephyr,code = <INPUT_KEY_0>;
+		};
+
+		button1: button_1 {
+			gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "Push button 1";
+			zephyr,code = <INPUT_KEY_1>;
+		};
+
+		button2: button_2 {
+			gpios = <&gpio0 10 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "Push button 2";
+			zephyr,code = <INPUT_KEY_2>;
+		};
+
+		button3: button_3 {
+			gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "Push button 3";
+			zephyr,code = <INPUT_KEY_3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: led_0 {
+			gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 0";
+		};
+
+		led1: led_1 {
+			gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 1";
+		};
+
+		led2: led_2 {
+			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 2";
+		};
+
+		led3: led_3 {
+			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 3";
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio9 {
+	status = "okay";
+};
+
+&gpiote130 {
+	status = "okay";
+	owned-channels = <4 5 6 7>;
+};
+
+/* Change to memory map to make room for read write partition for settings
+ * module.
+ *
+ * @note In case of use of the settings sotrage when running firmware on the
+ *       application core, the same memory map change must be applied to the
+*        application core DTS.
+ */
+/delete-node/ &dfu_partition;
+/delete-node/ &storage_partition;
+
+&cpuapp_rw_partitions {
+	dfu_partition: partition@100000 {
+		reg = < 0x100000 DT_SIZE_K(884) >;
+	};
+
+	storage_partition: partition@1dd000 {
+		reg = < 0x1dd000 DT_SIZE_K(24) >;
+	};
+};
+
+&mram1x {
+	cpurad_rw_partitions: cpurad-rw-partitions {
+		compatible = "nordic,owned-partitions", "fixed-partitions";
+		perm-read;
+		perm-write;
+		perm-secure;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cpurad_storage_partition: partition@1e3000 {
+			reg = <0x1e3000 DT_SIZE_K(24)>;
+		};
+	};
+};
+
+&cpurad_rw_partitions {
+	status = "okay";
+};