Skip to content

Web SSH & Telnet (WebSSH & WebTelnet 客户端) 简体中文版本🔮

License

Notifications You must be signed in to change notification settings

nkxingxh/sshwifty-CHS

 
 

Repository files navigation

Sshwifty Web SSH & Telnet 客户端

Sshwifty 是一个为 Web 设计的 SSH & Telnet 客户端。 它可以部署在你的电脑或服务器上,为任何兼容 (标准) 的网络浏览器提供 SSH 和 Telnet 访问界面。

Web 界面

构建状态

安装

二进制文件

编译后的二进制文件可以在 release 或 [action] 中找到.

请注意,这些二进制文件是自动 (或手动) 构建生成的,本项目的作者不会验证它们是否有效。你需要自行承担使用风险。

Docker 镜像

我没整中文版本的 docker 镜像, 你需要自己想办法在 docker 中运行

If Docker is installed on your machine, you may use our prebuilt Docker Image by executing following command:

$ docker run --detach \
  --restart always \
  --publish 8182:8182 \
  --name sshwifty \
  niruix/sshwifty:latest

When TLS is desired and you don't want to setup Docker Volumes, you can use SSHWIFTY_DOCKER_TLSCERT and SSHWIFTY_DOCKER_TLSCERTKEY environment variables to import credential files to the container and automatically apply them:

$ openssl req \
  -newkey rsa:4096 -nodes -keyout domain.key -x509 -days 90 -out domain.crt
$ docker run --detach \
  --restart always \
  --publish 8182:8182 \
  --env SSHWIFTY_DOCKER_TLSCERT="$(cat domain.crt)" \
  --env SSHWIFTY_DOCKER_TLSCERTKEY="$(cat domain.key)" \
  --name sshwifty \
  niruix/sshwifty:latest

The domain.crt and domain.key must be a valid TLS certificate and key file located on the same machine which the docker run command will be executed upon.

Compile from source code (Recommanded if you're a developer)

The following tools are required in order to build the software from source code:

  • git to download the source code
  • node and npm to build front-end application
  • go to build back-end application

To start the build process, execute:

$ git clone https://github.com/nirui/sshwifty
$ cd sshwifty
$ npm install
$ npm run build

When done, you can found the newly generated sshwifty binary inside current working directory.

Notice: Dockerfile contains the entire build procedure of this software. Please refer to it when you encounter any compile/build related issue.

Configure

Sshwifty can be configured through either file or environment variables. By default, the configuration loader will try to load file from default paths first, when failed, environment variables will be used.

You can also specify your own configuration file by setting up SSHWIFTY_CONFIG environment variable before start the software. For example:

$ SSHWIFTY_CONFIG=./sshwifty.conf.json ./sshwifty

This way, Sshwifty will try to load the configuration from file ./sshwifty.conf.json, and never reach for other environment variables.

配置文件

这是一个具有全部选项的配置文件:

{
  // HTTP Host. Keep it empty to accept request from all hosts, otherwise, only
  // specified host is allowed to access
  "HostName": "localhost",

  // Web interface access password. Set to empty to allow public access to the
  // web interface (By pass the Authenticate page)
  "SharedKey": "WEB_ACCESS_PASSWORD",

  // Remote dial timeout. This limits how long of time the backend can spend
  // to connect to a remote host. The max timeout will be determined by
  // server configuration (ReadTimeout).
  // (In Seconds)
  "DialTimeout": 10,

  // Socks5 proxy. When set, Sshwifty backend will try to connect remote through
  // the given proxy
  "Socks5": "localhost:1080",

  // Username of the Socks5 server. Please set when needed
  "Socks5User": "",

  // Password of the Socks5 server. Please set when needed
  "Socks5Password": "",

  // Sshwifty HTTP server, you can set multiple ones to serve on different
  // ports
  "Servers": [
    {
      // Which local network interface this server will be listening
      "ListenInterface": "0.0.0.0",

      // Which local network port this server will be listening
      "ListenPort": 8182,

      // Timeout of initial request. HTTP handshake must be finished within
      // this time
      // (In Seconds)
      "InitialTimeout": 3,

      // How long do the connection can stay in idle before the backend server
      // disconnects the client
      // (In Seconds)
      "ReadTimeout": 60,

      // How long the server will wait until the client connection is ready to
      // recieve new data. If this timeout is exceed, the connection will be
      // closed.
      // (In Seconds)
      "WriteTimeout": 60,

      // The interval between internal echo requests
      // (In Seconds)
      "HeartbeatTimeout": 20,

      // Forced delay between each request
      // (In Milliseconds)
      "ReadDelay": 10,

      // Forced delay between each write
      // (In Milliseconds)
      "WriteDelay": 10,

      // Path to TLS certificate file. Set empty to use HTTP
      "TLSCertificateFile": "",

      // Path to TLS certificate key file. Set empty to use HTTP
      "TLSCertificateKeyFile": ""
    },
    {
      "ListenInterface": "0.0.0.0",
      "ListenPort": 8182,
      "InitialTimeout": 3,
      .....
    }
  ],

  // Remote Presets, the operater can define few presets for user so the user
  // won't have to manually fill-in all the form fields
  //
  // Presets will be displayed in the "Known remotes" tab on the Connector
  // window
  //
  // Notice: You can use the same JSON value for `SSHWIFTY_PRESETS` if you are
  //         configuring your Sshwifty through enviroment variables.
  //
  // Warning: Presets Data will be sent to user client WITHOUT any protection.
  //          DO NOT add any secret information into Preset.
  //
  "Presets": [
    {
      // Title of the preset
      "Title": "SDF.org Unix Shell",

      // Preset Types, i.e. Telnet, and SSH
      "Type": "SSH",

      // Target address and port
      "Host": "sdf.org:22",

      // Form fields and values, you have to manually validate the correctness
      // of the field value
      //
      // Defining a Meta field will prevent user from changing it on their
      // Connector Wizard. If you want to allow users to use their own settings,
      // leave the field unsetted
      //
      // Values in Meta are scheme enabled, and supports following scheme
      // prefixes:
      // - "literal://": Text literal (Default)
      //                 Example: literal://Data value
      //                          (The final value will be "Data value")
      //                 Example: literal://file:///tmp/afile
      //                          (The final value will be "file:///tmp/afile")
      // - "file://": Load Meta value from given file.
      //              Example: file:///home/user/.ssh/private_key
      //                       (The file path is /home/user/.ssh/private_key)
      // - "environment://": Load Meta value from an Environment Variable.
      //                    Example: environment://PRIVATE_KEY_DATA
      //                    (The name of the target environment variable is
      //                    PRIVATE_KEY_DATA)
      //
      // All data in Meta is loaded during start up, and will not be updated
      // even the source already been modified.
      //
      "Meta": {
        // Data for predefined User field
        "User": "pre-defined-username",

        // Data for predefined Encoding field. Valid data is those displayed on
        // the page
        "Encoding": "pre-defined-encoding",

        // Data for predefined Password field
        "Password": "pre-defined-password",

        // Data for predefined Private Key field, should contains the content
        // of a Key file
        "Private Key": "file:///home/user/.ssh/private_key",

        // Data for predefined Authentication field. Valid values is what
        // displayed on the page (Password, Private Key, None)
        "Authentication": "Password",

        // Data for server public key fingerprint. You can acquire the value of
        // the fingerprint by manually connect to a new SSH host with Sshwifty,
        // the fingerprint will be displayed on the Fingerprint comformation
        // page.
        "Fingerprint": "SHA256:bgO...."
      }
    },
    {
      "Title": "Endpoint Telnet",
      "Type": "Telnet",
      "Host": "endpoint.vaguly.com:23",
      "Meta": {
        // Data for predefined Encoding field. Valid data is those displayed on
        // the page
        "Encoding": "utf-8"
        ....
      }
    },
    ....
  ],

  // Allow the Preset Remotes only, and refuse to connect to any other remote
  // host
  //
  // NOTICE: You can only configure OnlyAllowPresetRemotes through a config
  //         file. This option is not supported when you are configuring with
  //         environment variables
  "OnlyAllowPresetRemotes": false
}

sshwifty.conf.example.json is an example of a valid configuration file.

环境变量

有效的环境变量包括:

SSHWIFTY_HOSTNAME
SSHWIFTY_SHAREDKEY
SSHWIFTY_DIALTIMEOUT
SSHWIFTY_SOCKS5
SSHWIFTY_SOCKS5_USER
SSHWIFTY_SOCKS5_PASSWORD
SSHWIFTY_LISTENPORT
SSHWIFTY_INITIALTIMEOUT
SSHWIFTY_READTIMEOUT
SSHWIFTY_WRITETIMEOUT
SSHWIFTY_HEARTBEATTIMEOUT
SSHWIFTY_READDELAY
SSHWIFTY_WRITEELAY
SSHWIFTY_LISTENINTERFACE
SSHWIFTY_TLSCERTIFICATEFILE
SSHWIFTY_TLSCERTIFICATEKEYFILE
SSHWIFTY_PRESETS
SSHWIFTY_ONLYALLOWPRESETREMOTES

The options they represent correspond to their counterparts in the configuration file.

Notice: When you're using environment variables to configure Sshwifty, only one Sshwifty HTTP server is then allowed. There is no way to setup mulitple servers under this method of configuration. If you need to serve on multiple ports, use the configuration file instead.

Be aware: An invalid value inside following environment variables will cause the value to be sliently reset to default during configuration parsing phase without warning:

SSHWIFTY_DIALTIMEOUT
SSHWIFTY_INITIALTIMEOUT
SSHWIFTY_READTIMEOUT
SSHWIFTY_WRITETIMEOUT
SSHWIFTY_HEARTBEATTIMEOUT
SSHWIFTY_READDELAY
SSHWIFTY_WRITEELAY

FAQ

Why the software says "The time difference is beyond operational limit"?

This usually happens when the clock on the client and/or the server is unsynced beyond tolerance.

Please make sure the clock time on both the client and the server are correct by resync them with a NTP server, and then reload the page. The problem should be gone afterwards.

Why I got error "TypeError: Cannot read property 'importKey' of undefined"

It's usually because your web browser does not support WebCrypt API (such as window.crypto.subtle or anything under window.crypto), or the support has been disabled.

If you're using Google Chrome, please connect Sshwifty with HTTPS. Chrome will disable WebCrypt and many other APIs when the connection is not safe.

Can I serve Sshwifty under a subpath such as https://my.domain/ssh?

The short story is NO. Sshwifty was designed based on an assumption that it will run as the only service under a given hostname, allowing web browsers to better enforce their data isolation rules. This is very important because Sshwifty saves user data locally.

However, if you really want to put Sshwifty into a subpath, you can do so by taking advantage of the fact that Sshwifty backend interface and assets are always located under an URL prefix /sshwifty. You can thus redirect or proxy those requests to their new location.

Keep in mind, doing so is really hacky, and it's not recommended by the author thus no support will be provided if you decide to go with that.

Why I can't add my own key combinations to the Console tool bar?

The pre-defined key combinations are there mainly to make mobile operation possible as well as to resolve some hotkey conflicts. However, if efficiency is your first goal, please consider to use a software/on screen keyboard which is specially designed for terminal.

And if that's not enough, connect a physical keyboard through Bluetooth or OTA could be a better alternative. This way you can type as if you're using a computer console.

Credits

License

Code of this project is licensed under AGPL, see LICENSE.md for detail.

Third-party components used by this project are licensed under their respective licenses. See DEPENDENCIES.md to learn more about dependencies used by this project and read their copyright statements.

Contribute

This is a hobbyist project, meaning I don't have that much time to put into it, sorry.

Upon release (Which is then you're able to read this file), this project will enter the maintaining state, which includes doing some bug fixes and security updates. Adding new features however, is not a part of the state.

Please do not send any pull requests. If you need new feature, fork it, add it by yourself, then maintain it like one of your own project. It's not that hard with some Github features.

(Notice: Typos, grammar errors or invalid use of language in the source code and document is categorized as bug, please report them if you found any. Thank you!)

Appreciate your help, enjoy!

About

Web SSH & Telnet (WebSSH & WebTelnet 客户端) 简体中文版本🔮

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • JavaScript 42.1%
  • Go 31.2%
  • Vue 16.0%
  • CSS 8.4%
  • Shell 1.0%
  • Dockerfile 0.7%
  • HTML 0.6%