Is it a bug? #871

Anmol-Bakshi · 2024-06-12T10:58:16Z

Anmol-Bakshi
Jun 12, 2024

neper -T -n 2000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -reg 1

neper -M n2000-id1.tess -statelset vol -rcl 0.5 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n2000-id1.tess -statelset vol -rcl 0.5 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n2000-id1.tess'...
Info : [i] Parsed file `n2000-id1.tess'.
Info : Meshing...
Info : - Preparing... (cl = 0.1335) 100%
Info : - 0D meshing... 100%
Info : - 1D meshing... 100%
Info : - 2D meshing... 12% (0.37|0.89/71%|14%|15%)bnodeqty = 14 (*pN).NodeQty = 7
Error : You have discovered a bug in Neper! Please file an issue at
https://github.com/rquey/neper/issues. Thank you.

Answered by rquey

Jun 12, 2024

Not really. Try to specify a different -id value (not 1) in your -T command.

View full answer

rquey · 2024-06-12T11:50:26Z

rquey
Jun 12, 2024
Maintainer

Not really. Try to specify a different -id value (not 1) in your -T command.

1 reply

Anmol-Bakshi Jun 12, 2024
Author

As asked by you, I have changed -ids and tried, every time I am getting different error or a bug. Can you suggest/guide what can be done to remove them.
I am getting like this for six cases:
(1) neper -T -n 2000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -id 2 -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 2000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -id 2 -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.319673114 Info : > Iteration 34206: fmin=0.099998364 f=0.099998364 Info : > Final solution : f =0.099998364 (34206 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=2466
Info : Writing results...
Info : [o] Writing file `n2000-id2.tess'... Info : [o] Wrote file` n2000-id2.tess'.
Info : Elapsed time: 87.455 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n2000-id2.tess -statelset vol -rcl 0.5 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n2000-id2.tess -statelset vol -rcl 0.5 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n2000-id2.tess'...
Info : [i] Parsed file n2000-id2.tess'. Info : Meshing... Info : - Preparing... (cl = 0.1324) 100% Error : - Failed to project 3 faces: 4306 4310 8060. Info : [o] Writing file failed_faces'...
Info : [o] Wrote file failed_faces'. Info : [o] Writing file failed_polys'...
Info : [o] Wrote file `failed_polys'.
Aborted (core dumped)

(2) neper -T -n 2000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -id 5 -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 2000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -id 5 -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.655873613 Info : > Iteration 34748: fmin=0.099997660 f=0.099997660 Info : > Final solution : f =0.099997660 (34748 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=2359
Info : Writing results...
Info : [o] Writing file `n2000-id5.tess'... Info : [o] Wrote file` n2000-id5.tess'.
Info : Elapsed time: 92.030 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n2000-id5.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n2000-id5.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n2000-id5.tess'...
Info : [i] Parsed file `n2000-id5.tess'.
Info : Meshing...
Info : - Preparing... (cl = 0.1068) 100%
Info : - 0D meshing... 100%
Info : - 1D meshing... 100%
Info : - 2D meshing... 1% (0.74|0.9/83%|10%| 7%)bnodeqty = 19 (*pN).NodeQty = 18
Error : You have discovered a bug in Neper! Please file an issue at
https://github.com/rquey/neper/issues. Thank you.

Aborted (core dumped)

(3) neper -T -n 2000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -id 7 -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 2000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -id 7 -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.382516102 Info : > Iteration 31841: fmin=0.099920538 f=0.099920538 Info : > Final solution : f =0.099920538 (31841 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=2442
Info : Writing results...
Info : [o] Writing file `n2000-id7.tess'... Info : [o] Wrote file` n2000-id7.tess'.
Info : Elapsed time: 86.518 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n2000-id7.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n2000-id7.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n2000-id7.tess'...
Info : [i] Parsed file n2000-id7.tess'. Info : Meshing... Info : - Preparing... (cl = 0.1058) 100% Error : - Failed to project 1 face: 7091. Info : [o] Writing file failed_faces'...
Info : [o] Wrote file failed_faces'. Info : [o] Writing file failed_polys'...
Info : [o] Wrote file `failed_polys'.
Aborted (core dumped)

(4) neper -T -n 2000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -id 17 -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 2000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -id 17 -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.453936051 Info : > Iteration 33024: fmin=0.099996851 f=0.099996851 Info : > Final solution : f =0.099996851 (33024 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=2506
Info : Writing results...
Info : [o] Writing file `n2000-id17.tess'... Info : [o] Wrote file` n2000-id17.tess'.
Info : Elapsed time: 88.228 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n2000-id17.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n2000-id17.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n2000-id17.tess'...
Info : [i] Parsed file `n2000-id17.tess'.
Info : Meshing...
Info : - Preparing... (cl = 0.1058) 100%
Info : - 0D meshing... 100%
Info : - 1D meshing... 100%
Info : - 2D meshing... 14% (0.29|0.9/72%|14%|14%)bnodeqty = 28 (*pN).NodeQty = 7
Error : You have discovered a bug in Neper! Please file an issue at
https://github.com/rquey/neper/issues. Thank you.

Aborted (core dumped)

(5) neper -T -n 4000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 4000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.078652217 Info : > Iteration 59565: fmin=0.099962344 f=0.099962344 Info : > Final solution : f =0.099962344 (59565 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=5301
Info : Writing results...
Info : [o] Writing file `n4000-id1.tess'... Info : [o] Wrote file` n4000-id1.tess'.
Info : Elapsed time: 185.729 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n4000-id1.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n4000-id1.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n4000-id1.tess'...
Info : [i] Parsed file `n4000-id1.tess'.
Info : Meshing...
Info : - Preparing... (cl = 0.08485) 100%
Info : - 0D meshing... 100%
Info : - 1D meshing... 100%
Info : - 2D meshing... 6% (0.67|0.9/75%|13%|12%)bnodeqty = 24 (*pN).NodeQty = 13
Error : You have discovered a bug in Neper! Please file an issue at
https://github.com/rquey/neper/issues. Thank you.

Aborted (core dumped)

(6) neper -T -n 4000 -morpho gg -morphooptistop "val=1e-1" -domain "cube(5,2,30)" -transform "cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5))" -id 25 -reg 1

======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -T loaded with arguments: Info : [ini file] (none) Info : [com line] -n 4000 -morpho gg -morphooptistop val=1e-1 -domain cube(5,2,30) -transform cut(cube(-10,1.5,-10,10,7.06,22.94,2),cube(3.5,10,-10,10,7.06,22.94,2),cylinder(3.5,0,15,0,1,0,0.5),cylinder(1.5,0,15,0,1,0,0.5)) -id 25 -reg 1 Info : --------------------------------------------------------------- Info : Reading input data... Info : Creating domain... Info : Creating tessellation... Info : - Setting seeds... 100% Info : - Running tessellation... Info : > Initial solution: f =1.113492142 Info : > Iteration 58298: fmin=0.099994444 f=0.099994444 Info : > Final solution : f =0.099994444 (58298 iterations) Info : > Reached val' criterion.
Info : Generating crystal orientations...
Info : Transforming tessellation...
Info : - Cutting (experimental)...
Info : > cube(-10,1.5,-10,10,7.06,22.94,2)...
Info : > cube(3.5,10,-10,10,7.06,22.94,2)...
Info : > cylinder(3.5,0,15,0,1,0,0.5)...
Info : > cylinder(1.5,0,15,0,1,0,0.5)...
Info : Regularizing tessellation...
Info : - loop 2/2: 100% del=5397
Info : Writing results...
Info : [o] Writing file `n4000-id25.tess'... Info : [o] Wrote file` n4000-id25.tess'.
Info : Elapsed time: 178.492 secs.

ffg@ffg:~/Anmol/PhD/Neper/tensile-sample-S6$ neper -M n4000-id25.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh
======================== N e p e r =======================
Info : A software package for polycrystal generation and meshing.
Info : Version 4.9.1-1
Info : Built with: gsl|muparser|opengjk|openmp|nlopt|libscotch (full)
Info : Running on 48 threads.
Info : https://neper.info
Info : Copyright (C) 2003-2022, and GNU GPL'd, by Romain Quey.
Info : No initialization file found (/home/ffg/.neperrc'). Info : --------------------------------------------------------------- Info : MODULE -M loaded with arguments: Info : [ini file] (none) Info : [com line] n4000-id25.tess -statelset vol -rcl 0.4 -order 1 -interface continuous -format inp -o tensile-25-notch -format msh Info : --------------------------------------------------------------- Info : Reading input data... Info : - Reading arguments... Info : Loading input data... Info : - Loading tessellation... Info : [i] Parsing file n4000-id25.tess'...
Info : [i] Parsed file `n4000-id25.tess'.
Info : Meshing...
Info : - Preparing... (cl = 0.08435) 100%
Info : - 0D meshing... 100%
Info : - 1D meshing... 100%
Info : - 2D meshing... 4% (0.11|0.9/75%|13%|12%)
*pbnodeqty = 29
nodeqty1d = 34
min_dist_max = 0.000000
Aborted (core dumped)

anujyadav0693 · 2024-07-02T05:52:43Z

anujyadav0693
Jul 2, 2024

Anmol, how do you install the latest version 4.9.1-1? in GitHub latest is showing 4.9.0
please reply.
thank you

0 replies

Anmol-Bakshi · 2024-07-02T09:55:14Z

Anmol-Bakshi
Jul 2, 2024
Author

it is there, u can also see in screenshot.

0 replies

anujyadav0693 · 2024-07-02T10:00:02Z

anujyadav0693
Jul 2, 2024

Thank you brother but when I going to install .tar.gz file. From where I get this latest file because in GitHub page latest .tar.gz file is for 4.9.0 thankyou

…

On Tue, 2 Jul, 2024, 3:25 pm Anmol-Bakshi, ***@***.***> wrote: it is there, u can also see in screenshot. Screenshot.2024-07-02.152502.png (view on web) <https://github.com/neperfepx/neper/assets/108575045/03424b89-df39-4ef7-a6ad-b52aac35776f> — Reply to this email directly, view it on GitHub <#871 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2GG52DEJUCQ2VTUC3CLUS3ZKJ2JRAVCNFSM6AAAAABJGDPLWGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSMZUG42TG> . You are receiving this because you commented.Message ID: ***@***.***>

0 replies

Anmol-Bakshi · 2024-07-02T10:09:06Z

Anmol-Bakshi
Jul 2, 2024
Author

i think u can again download the src folder and install.

0 replies

anujyadav0693 · 2024-07-02T12:45:16Z

anujyadav0693
Jul 2, 2024

Thank you brother i found

…

On Tue, 2 Jul, 2024, 3:39 pm Anmol-Bakshi, ***@***.***> wrote: i think u can again download the src folder and install. — Reply to this email directly, view it on GitHub <#871 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2GG52HXEFX7OJLFNP5ODGTZKJ35RAVCNFSM6AAAAABJGDPLWGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSMZUHA4TE> . You are receiving this because you commented.Message ID: ***@***.***>

0 replies

Anmol-Bakshi · 2024-07-02T15:33:42Z

Anmol-Bakshi
Jul 2, 2024
Author

then i am not sure, maybe it has been removed or something, but i followed the same procedure: downloaded the src file, extracted it and using commands installed it.

0 replies

anujyadav0693 · 2024-07-02T15:50:48Z

anujyadav0693
Jul 2, 2024

I also do the same it is working

…

On Tue, 2 Jul, 2024, 9:04 pm Anmol-Bakshi, ***@***.***> wrote: then i am not sure, maybe it has been removed or something, but i followed the same procedure: downloaded the src file, extracted it and using commands installed it. — Reply to this email directly, view it on GitHub <#871 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2GG52FOEPT3MU522G7Q6A3ZKLB6ZAVCNFSM6AAAAABJGDPLWGVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSMZYGQ3TG> . You are receiving this because you commented.Message ID: ***@***.***>

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Is it a bug? #871

{{title}}

Replies: 8 comments 1 reply

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Is it a bug? #871

Anmol-Bakshi Jun 12, 2024

Replies: 8 comments · 1 reply

rquey Jun 12, 2024 Maintainer

Anmol-Bakshi Jun 12, 2024 Author

anujyadav0693 Jul 2, 2024

Anmol-Bakshi Jul 2, 2024 Author

anujyadav0693 Jul 2, 2024

Anmol-Bakshi Jul 2, 2024 Author

anujyadav0693 Jul 2, 2024

Anmol-Bakshi Jul 2, 2024 Author

anujyadav0693 Jul 2, 2024

Anmol-Bakshi
Jun 12, 2024

Replies: 8 comments 1 reply

rquey
Jun 12, 2024
Maintainer

Anmol-Bakshi Jun 12, 2024
Author

anujyadav0693
Jul 2, 2024

Anmol-Bakshi
Jul 2, 2024
Author

anujyadav0693
Jul 2, 2024

Anmol-Bakshi
Jul 2, 2024
Author

anujyadav0693
Jul 2, 2024

Anmol-Bakshi
Jul 2, 2024
Author

anujyadav0693
Jul 2, 2024