Skip to content

Latest commit

 

History

History
51 lines (39 loc) · 2.56 KB

README.md

File metadata and controls

51 lines (39 loc) · 2.56 KB

DrinkMachine

DrinkMachine is a raspberry pi powered bartender. Using the provided parts list and wiring diagrams you can load this onto your pi and have it serving you drinks.

Installation

Start with a lite Raspbian install. Then install a few packages to make life easier

sudo apt install git sqlite3

Next install golang, currently I use 1.10.3, to get that, and setup your paths, do:

wget https://storage.googleapis.com/golang/go1.10.3.linux-armv6l.tar.gz
sudo tar -C /usr/local -xzf go1.10.3.linux-armv6l.tar.gz
echo "export PATH=\$PATH:/usr/local/go/bin:~/go/bin" >> ~/.profile
echo "export GOPATH=\$HOME/go" >> ~/.profile

Now either go get github.com/neophenix/drinkmachine or otherwise copy this to your pi.

Setup the sqlite DB you'll need by using the .schema file in the db dir

sqlite3 drinkmachine.db < db/drinkmachine.schema

If you modified the wiring at all, you'll want to go into the DB and modify the pumps table, setting the correct GPIO pins for each pump. See db/README.md for details on the db tables.

Last, build the binary and start the process

go build cmd/drinkmachine/drinkmachine.go
sudo ./drinkmachine

Note: sudo is required because the GPIO lib needs it and by default we want to use port 80

Options

DrinkMachine has only a few command line flags to keep things simple

    -port       (default:80) which port to bind to
    -db         (default:drinkmachine.db) location of the sqlite3 DB
    -webroot    (default:web) location of the web dir (templates, static files, etc)
    -cache_templates (default:true) more for dev work, setting to false make the service read the web templates off disk each request

Usage

Everything is done via the web interface (port 80 by default). The main page lets you select a drink and pour it, then there are 3 "admin" pages

  • Manage Ingredients is the first place you should go, add all the alcohols, etc that you will want to use
  • Manage Pumps lets you select which ingredient is hooked up to each pump, it also lets you set the flow rate of the pump in ml/min. The ones I used are rated for 100 ml/min and that is what the default is.
  • Manage Drinks is where you go to add all the cocktails you will want to make. You give them a name, select an amount, units (the 3 common ones I know are defined, more can be added, PR welcome), and ingredient, and keep adding more ingredients as needed. Then add some notes on finishing the drink or anything else you couldn't define elsewhere and save.