-
-
Notifications
You must be signed in to change notification settings - Fork 180
/
Copy pathtarget_external_memory.c
141 lines (120 loc) · 6.32 KB
/
target_external_memory.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
//
// Copyright (c) .NET Foundation and Contributors
// See LICENSE file in the project root for full license information.
//
#include <ch.h>
#include "hal.h"
#include <fsmc_sdram_lld.h>
#include <stm32f7xx_hal.h>
// SDRAM Mode definition register defines
#define FMC_SDCMR_MRD_BURST_LENGTH_1 ((uint16_t)0x0000)
#define FMC_SDCMR_MRD_BURST_LENGTH_2 ((uint16_t)0x0001)
#define FMC_SDCMR_MRD_BURST_LENGTH_4 ((uint16_t)0x0002)
#define FMC_SDCMR_MRD_BURST_LENGTH_8 ((uint16_t)0x0004)
#define FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
#define FMC_SDCMR_MRD_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
#define FMC_SDCMR_MRD_CAS_LATENCY_2 ((uint16_t)0x0020)
#define FMC_SDCMR_MRD_CAS_LATENCY_3 ((uint16_t)0x0030)
#define FMC_SDCMR_MRD_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
#define FMC_SDCMR_MRD_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
#define FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
// FMC_ReadPipe_Delay
#define FMC_ReadPipe_Delay_0 ((uint32_t)0x00000000)
#define FMC_ReadPipe_Delay_1 ((uint32_t)0x00002000)
#define FMC_ReadPipe_Delay_2 ((uint32_t)0x00004000)
#define FMC_ReadPipe_Delay_Mask ((uint32_t)0x00006000)
// FMC_Read_Burst
#define FMC_Read_Burst_Disable ((uint32_t)0x00000000)
#define FMC_Read_Burst_Enable ((uint32_t)0x00001000)
#define FMC_Read_Burst_Mask ((uint32_t)0x00001000)
// FMC_SDClock_Period
#define FMC_SDClock_Disable ((uint32_t)0x00000000)
#define FMC_SDClock_Period_2 ((uint32_t)0x00000800)
#define FMC_SDClock_Period_3 ((uint32_t)0x00000C00)
#define FMC_SDClock_Period_Mask ((uint32_t)0x00000C00)
// FMC_ColumnBits_Number
#define FMC_ColumnBits_Number_8b ((uint32_t)0x00000000)
#define FMC_ColumnBits_Number_9b ((uint32_t)0x00000001)
#define FMC_ColumnBits_Number_10b ((uint32_t)0x00000002)
#define FMC_ColumnBits_Number_11b ((uint32_t)0x00000003)
// FMC_RowBits_Number
#define FMC_RowBits_Number_11b ((uint32_t)0x00000000)
#define FMC_RowBits_Number_12b ((uint32_t)0x00000004)
#define FMC_RowBits_Number_13b ((uint32_t)0x00000008)
// FMC_SDMemory_Data_Width
#define FMC_SDMemory_Width_8b ((uint32_t)0x00000000)
#define FMC_SDMemory_Width_16b ((uint32_t)0x00000010)
#define FMC_SDMemory_Width_32b ((uint32_t)0x00000020)
// FMC_InternalBank_Number
#define FMC_InternalBank_Number_2 ((uint32_t)0x00000000)
#define FMC_InternalBank_Number_4 ((uint32_t)0x00000040)
// FMC_CAS_Latency
#define FMC_CAS_Latency_1 ((uint32_t)0x00000080)
#define FMC_CAS_Latency_2 ((uint32_t)0x00000100)
#define FMC_CAS_Latency_3 ((uint32_t)0x00000180)
// FMC_Write_Protection
#define FMC_Write_Protection_Disable ((uint32_t)0x00000000)
#define FMC_Write_Protection_Enable ((uint32_t)0x00000200)
#define SDRAM_SIZE (8 * 1024 * 1024)
#define SDRAM_START ((void *)FSMC_Bank6_MAP_BASE)
// SDRAM driver configuration structure.
static const SDRAMConfig sdram_cfg = {
.sdcr = (uint32_t)FMC_ColumnBits_Number_8b | FMC_RowBits_Number_12b | FMC_SDMemory_Width_16b |
FMC_InternalBank_Number_4 | FMC_CAS_Latency_3 | FMC_Write_Protection_Disable | FMC_SDClock_Period_2 |
FMC_Read_Burst_Enable | FMC_ReadPipe_Delay_1,
.sdtr = (uint32_t)(2 - 1) | // FMC_LoadToActiveDelay = 2 (TMRD: 2 Clock cycles)
(7 << 4) | // FMC_ExitSelfRefreshDelay = 7 (TXSR: min=70ns (7x11.11ns))
(4 << 8) | // FMC_SelfRefreshTime = 4 (TRAS: min=42ns (4x11.11ns) max=120k (ns))
(7 << 12) | // FMC_RowCycleDelay = 7 (TRC: min=70 (7x11.11ns))
(3 << 16) | // FMC_WriteRecoveryTime = 2 (TWR: min=1+ 7ns (1+1x11.11ns))
(2 << 20) | // FMC_RPDelay = 2 (TRP: 20ns => 2x11.11ns)
(2 << 24), // FMC_RCDDelay = 2 (TRCD: 20ns => 2x11.11ns)
// NRFS = 4-1
.sdcmr =
(3 << 5) | (FMC_SDCMR_MRD_BURST_LENGTH_2 | FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL | FMC_SDCMR_MRD_CAS_LATENCY_3 |
FMC_SDCMR_MRD_OPERATING_MODE_STANDARD | FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE)
<< 9,
.sdrtr = (uint32_t)(683 << 1),
};
void Target_ExternalMemoryInit()
{
fsmcSdramInit();
fsmcSdramStart(&SDRAMD, &sdram_cfg);
}
void Target_ExternalMemoryConfigMPU()
{
// ARM: STM32F7: hard fault caused by unaligned Memory Access
// reference https://www.keil.com/support/docs/3777%20%20.htm
// SYMPTOM
// If you use an STM32F7xx microcontroller with an external SDRAM,
// the Cortex-M7 core may unexpectedly run into the hard fault handler because of unaligned access.
// This may happen for example, when the frame buffer of an LCD, a RAM filesystem or any other data is
// located into the SDRAM address range 0xC0000000 - 0xC03FFFFF (max. 4MB).
// The hard fault is executed although the bit UNALIGN_TRP (bit 3) in the CCR register is not enabled.
// CAUSE
// In general, RAM accesses on Cortex-M7 based devices do not have to be aligned in any way.
// The Cortex-M7 core can handle unaligned accesses by hardware.
// Usually, variables should be naturally aligned because these accesses are slightly faster than unaligned
// accesses.
// STM32F7xx devices have the external SDRAM mapped to the
// address range 0xC0000000 - 0xC03FFFFF (max. 4MB).
// According to the ARMv7-M Architecture Reference Manual chapter B3.1 (table B3-1),
// the area 0xC0000000-0xDFFFFFFF (32MB) is specified as Device Memory Type.
// According to chapter A3.2.1, all accesses to Device Memory Types must be naturally aligned.
// If they are not, a hard fault will execute no matter if the bit UNALIGN_TRP (bit 3) in the CCR register is
// enabled or not.
MPU_Region_InitTypeDef MPU_InitStruct;
// Configure the MPU attributes for SDRAM
MPU_InitStruct.Enable = MPU_REGION_ENABLE;
MPU_InitStruct.BaseAddress = 0xD0000000;
MPU_InitStruct.Size = MPU_REGION_SIZE_8MB;
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
MPU_InitStruct.Number = MPU_REGION_NUMBER0;
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL1;
MPU_InitStruct.SubRegionDisable = 0x00;
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;
HAL_MPU_ConfigRegion(&MPU_InitStruct);
}