[BUG] How do I get the post-reboot script to rerun? Sometimes settings get rotten, and I want to reset to those clean starting settings.

[SSYH]

Describe the bug
In trial runs of install, I remember a post-reboot process asking what else I want. Now on my actual HW, it doesn't do that, and I don't have eg. dynamic wallpaper. I'd like to run that post-reboot script again.

To Reproduce
not much more I can add other than what's above

Expected behavior
I get to opt-in to the dynamic wallpaper.

Screenshots
not much more I can add other than what's above

Distribution (please complete the following information):

System:
  Kernel: 6.11.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1 clocksource: tsc
    avail: acpi_pm parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=927d6396-88c9-42ea-83dc-b96f3860dbfd rw rootflags=subvol=@ quiet loglevel=3 ibt=off
  Desktop: Hyprland v: 0.44.1 with: waybar tools: avail: hyprlock,swayidle,swaylock vt: 1
    dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP Pavilion Laptop 15-cc0xx v: Type1ProductConfigId
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 8364 v: 46.20 serial: <superuser required> part-nu: 2DS86UA#ABA
    uuid: <superuser required> UEFI: Insyde v: F.09 date: 06/02/2017
Battery:
  ID-1: BAT0 charge: 23.4 Wh (100.0%) condition: 23.4/23.4 Wh (100.0%) volts: 12.9 min: 11.6
    model: HP Primary type: Li-ion serial: N/A status: full
CPU:
  Info: model: Intel Core i7-7500U bits: 64 type: MT MCP arch: Amber/Kaby Lake note: check
    gen: core 7 level: v3 note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142)
    stepping: 9 microcode: 0xF6
  Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2 smt: enabled cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 3502 min/max: 400/3500 scaling: driver: intel_pstate governor: performance
    cores: 1: 3502 2: 3502 3: 3502 4: 3502 bogomips: 23199
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel HD Graphics 620 vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-9.5
    process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:5916 class-ID: 0300
  Device-2: Realtek HP Wide Vision HD Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
    lanes: 1 mode: 2.0 bus-ID: 1-3:3 chip-ID: 0bda:58eb class-ID: 0e02 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.3 compositor: Hyprland
    v: 0.44.1 driver: X: loaded: modesetting alternate: fbdev,intel,vesa dri: iris gpu: i915
    display-ID: 1
  Monitor-1: eDP-1 model: BOE Display 0x06a4 built: 2015 res: N/A dpi: 101 gamma: 1.2 scale: 1
    size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1366x768
  API: Vulkan v: 1.3.295 layers: 4 device: 0 type: integrated-gpu name: Intel HD Graphics 620
    (KBL GT2) driver: mesa intel v: 24.2.5-arch1.1 device-ID: 8086:5916 surfaces: xcb,xlib,wayland
    device: 1 type: cpu name: llvmpipe (LLVM 18.1.8 256 bits) driver: mesa llvmpipe
    v: 24.2.5-arch1.1 (LLVM 18.1.8) device-ID: 10005:0000 surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl,snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.11.5-zen1-1-zen status: kernel-api tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.2.6 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  Device-2: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:24fb class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Intel Wireless-AC 3168 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-7:4 chip-ID: 8087:0aa7 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: 
up address: <filter> bt-v: 4.2 lmp-v: 8 status:
    discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 1.14 TiB used: 14.18 GiB (1.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter> fw-rev: 4C
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Micron model: M600 MTFDDAV256MBF size: 238.47 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: SSD serial: <filter>
    fw-rev: MU03 scheme: GPT
Partition:
  ID-1: / raw-size: 195.31 GiB size: 195.31 GiB (100.00%) used: 14.09 GiB (7.2%) fs: btrfs
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%) used: 90.9 MiB (8.9%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 195.31 GiB size: 195.31 GiB (100.00%) used: 14.09 GiB (7.2%) fs: btrfs
    dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 195.31 GiB size: 195.31 GiB (100.00%) used: 14.09 GiB (7.2%) fs: btrfs
    dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 195.31 GiB size: 195.31 GiB (100.00%) used: 14.09 GiB (7.2%) fs: btrfs
    dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.51 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd
    avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 17.06 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3
Sensors:
  System Temperatures: cpu: 49.0 C pch: 36.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.51 GiB used: 2.33 GiB (15.0%)
  Processes: 203 Power: uptime: 1h 19m states: freeze,mem,disk suspend: deep avail: s2idle
    wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 6.19 GiB
    services: upowerd Init: systemd v: 256 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1438 libs: 402 tools: pacseek,paru,yay Compilers: gcc: 14.2.1
    Client: shell wrapper v: 5.2.37-release inxi: 3.3.36
Garuda (2.6.26-1):
  System install date:     2024-10-27
  Last full system update: 2024-10-29 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            

[SSYH]

Sorry, I may be confusing this with dotfiles repo

[mylinuxforwork]

@SSYH You can run the post script from the Welcome App. Three dots. The new version will include a button on the Welcoma App UI called Installation Options.