Shelly 2PM Gen3

[Judocrafter]

Will the Shelly 2PM Gen3 also be supported with this Homekit software in the future?

[markirb]

Sure there is no reason why not. As soon as we know the Pinning and the Powerchip, this should be easy

[Judocrafter]

Gen 2 or 3 you mean ??

sorry I mean gen3 of course, have now adjusted it above.

[Judocrafter]

Works perfectly, only the blinds control is a bit special, but this is probably also due to Homekit itself.

What do you mean with special? Planning to use it this way by end of the week until this firmware here is ready for the 2PM Gen3.

It is a bit special to control the tilt angle via homekit, as this is not solved as nicely on the “main side” as in shelly. Do you understand what I mean? But it works wonderfully and I don't currently need the tilt angle.

[thepilzkopf]

Looks nice, thanks! I understand what you mean

[thepilzkopf]

Sure there is no reason why not. As soon as we know the Pinning and the Powerchip, this should be easy

Is there a possibility to help you with this?

[markirb]

Sure there is no reason why not. As soon as we know the Pinning and the Powerchip, this should be easy

Is there a possibility to help you with this?

If you have electronics background you could measure :) if you have not you can ask Shelly support

[markirb]

There is a preliminary pinning from tasmota discussions, I have put it into a PR.

If anyone feels adventurous:

https://github.com/mongoose-os-apps/shelly-homekit/pull/1578/checks

[markirb]

Ah, so you are using window opening... bad. Because I figure everything should work fine except for powermeter, as the whole i2c port is new for esp32c3.

URLs only work once it is out of this pre version.

Unfortunately there is nothing to revert to at least the usual link does not provide a firmware to stock yet:

https://updates.shelly.cloud/update/S2PMG3

Can you test in non window mode?

[Judocrafter]

@markirb
yes I use it for a roller shutter which I also wrote above? So I can only test it in this function. So I have no possibility to return to the normal version?
But perhaps you could have mentioned that briefly...
Can I leave the Shelly attached over the weekend without any problems?

[markirb]

Yes but still it can be operated on normal mode, maybe we see better what's wrong there. One output controls each direction then.

I'm sorry. It was mentioned on issues.

What is your concern? If nobody touches the device then the device does nothing.

[Judocrafter]

okay we'll just leave tomorrow morning and no one will press the switch. i'll test it at the beginning of the week with the
normal mode okay? i just wanted to be sure that nothing starts to burn haha

[markirb]

a beta stock firmware is now available to revert:

https://updates.shelly.cloud/update/S2PMG3