Skip to content

Latest commit

 

History

History
65 lines (53 loc) · 2.29 KB

README.md

File metadata and controls

65 lines (53 loc) · 2.29 KB
Raw

Steps to get RS_ASIO working on a Universal Audio Volt 1 interface.

This guide should work for all devices in the UA Volt series, but adjust the Input0 channel if you are not using input 0. We will also go over how to download the driver for this device. If you have already installed UA Connect and registered your Volt, skip to step 8.

  1. Plug in your UA Volt interface
  2. Go to the Universal Audio website, and their downloads page
  3. Click on the Volt option
  4. Download the UA Connect software for Windows
  5. Install the software
  6. Once you get into the software, it should notice your UA Volt device. Register your device by logging into / creating a UA account.
  7. After you register, it should ask to install the drivers.
  8. Go to your Rocksmith folder
  9. Paste the following into your RS_ASIO.ini file.
[Config]
EnableWasapiOutputs=0
EnableWasapiInputs=0
EnableAsio=1

[Asio]
; available buffer size modes:
;    driver - respect buffer size setting set in the driver
;    host   - use a buffer size as close as possible as that requested by the host application
;    custom - use the buffer size specified in CustomBufferSize field
BufferSizeMode=custom
CustomBufferSize=48

[Asio.Output]
Driver=Universal Audio Volt
BaseChannel=0
AltBaseChannel=
EnableSoftwareEndpointVolumeControl=1
EnableSoftwareMasterVolumeControl=1
SoftwareMasterVolumePercent=100

[Asio.Input.0]
Driver=Universal Audio Volt
Channel=0
EnableSoftwareEndpointVolumeControl=1
EnableSoftwareMasterVolumeControl=1
SoftwareMasterVolumePercent=100

[Asio.Input.1]
Driver=
Channel=0
EnableSoftwareEndpointVolumeControl=1
EnableSoftwareMasterVolumeControl=1
SoftwareMasterVolumePercent=100

[Asio.Input.Mic]
Driver=
Channel=
EnableSoftwareEndpointVolumeControl=
EnableSoftwareMasterVolumeControl=
SoftwareMasterVolumePercent=

Note: This will default your input to channel 0 (left-most jack), and sends the audio output to the Volt device. If you want to use headphones / speakers that are not connected to the Volt, remove the text in the Driver line of Asio.Output and set EnableWasapiOutputs under Config to 1.

  1. Now in your Rocksmith.ini file, make sure you have both ExclusiveMode and Win32UltraLowLatencyMode set to 1 as those are required for RS_ASIO to work properly.
  2. Launch Rocksmith

I hope this helps!