check_apc-load

#! /usr/local/bin/perl
#
# $Id$
# $HeadURL$
#
# Don't use embedded perl for this check. Must be in first 10 lines of file!
#
# nagios: -epn
#
#
#################################################
# Product: ATS - Automatic Transfer Switch      #
# Manufacturer: APC                             #                
# Model: AP7723                                 #
#                                               #                    
# Retrive output load.                          #
#                                               #
#################################################
#

use strict;
use lib "/local/nagios/lib";
use SU_Nagios qw ( exit_clean get_snmp_community );
use Net::SNMP;
use Getopt::Std;
use vars qw ($opt_h $opt_H $opt_v $opt_C $opt_w $opt_c);

# OID base for load
my $OID_BASE = "1.3.6.1.4.1.318.1.1.8.5.4.3.1.4.1.1.1";

# SNMP options
my $version = "1";
my $timeout = 2;

# The top secret community name (password)...
my $community = get_snmp_community ('snmp');

# Thresholds
my $critical_high_load = -1;
my $warning_high_load = -1;
my $critical_low_load = -1;
my $warning_low_load = -1;

# Our return status - we start with 0 (OK) and hope for the best
my $status = 0;

# Our return string with lots of interesting stuff in it
my $returnstr = "";

# The SNMP hostname and community to use for the query
my $hostname = "";

# Number of power phases attached to the UPS
my $num_phases = "0";

# Grab the command line options
getopts("h:H:v:f:C:w:c:");

# If we didn't get any options, show some help and quit
if ($opt_h){
    usage ();
}

# Get the hostname, if it was given..
if (defined($opt_H)){
    $hostname = $opt_H;
} else {
    # We really need a hostname
    usage();
}

if (defined($opt_v)) {
    # Get the snmp version for the UPS or use the default
    $version = $opt_v;
}

# Get the SNMP community
if (defined($opt_C)){
    $community = $opt_C;
}

# Grab the warning thresholds
if (defined($opt_w)) {
    my @warning = split(/\./, $opt_w);

    if (!($warning[0] eq "")) {
        $warning_low_load= $warning[0];
    }
    if (!($warning[1] eq "")) {
        $warning_high_load = $warning[1];
    }
}

# Grab the critical thresholds
if (defined($opt_c)) {
    my @critical = split(/\./, $opt_c);

    if (!($critical[0] eq "")) {
        $critical_low_load = $critical[0];
    }
    if (!($critical[1] eq "")) {
        $critical_high_load = $critical[1];
    }

    # If we also have the maximum load value, make sure it is higher
    # than the minimum
    if (($critical_high_load != -1) &&
        ($critical_high_load < $critical_low_load)) {
        exit_clean ('CRITICAL', "Critical load maximum is lower than the minimum!\n");
    }

}

# If we have both high load thresholds, make sure the critical is higher than
# the warning
if (($warning_high_load != -1) &&
    ($critical_high_load != -1) &&
    ($warning_high_load > $critical_high_load)) {
    exit_clean ('CRITICAL', "The high critical load is lower than warning load!\n");
}


# If we have both low load thresholds, make sure the critical is lower than
# the warning
if (($warning_low_load != -1) &&
    ($critical_low_load != -1) &&
    ($warning_low_load > $critical_low_load)) {
    exit_clean ('CRITICAL', "The low critical load is higher than warning load!\n");
}


# Initialise the SNMP session via the Net::SNMP perl module
my ($snmp_session, $snmp_error) = Net::SNMP->session(
    -community => $community,
    -hostname => $hostname,
    -version => $version,
    -timeout => $timeout,
    );

# Grab interesting details
check_device();

# Shut down the SNMP session
$snmp_session->close();

# Do not use numerical comparision to avoid failures with ePN in Nagios2. Sigh.
$status = 'UNKNOWN'  if ("$status" eq '-1');
$status = 'OK'       if ("$status" eq '0');
$status = 'WARNING'  if ("$status" eq '1');
$status = 'CRITICAL' if ("$status" eq '2');
exit_clean ($status, $returnstr . "\n");


# Change the status level
sub status {
    my $newstatus = $_[0];

    # If the new status is greater than the old status, change the old status
    if ($newstatus > $status) {
        $status = $newstatus;
    }
}


# Grab a value from snmp
sub grab_snmp_value {
    my $this_oid = $_[0];
    my $this_value = "";

    # Try to grab the OID's value, if it exists
    if (defined($snmp_session->get_request($this_oid))) {
        foreach ($snmp_session->var_bind_names()) {
            $this_value = $snmp_session->var_bind_list()->{$_};
        }
    }

    # Return the value we got..
    return $this_value;
}


# Grab lots of interesting info about the device
sub check_device {
    # Grab some values
    my $OID;
    my $snmp_ret_value;
    
    $returnstr = '';
    
       $snmp_ret_value = grab_snmp_value($OID_BASE);
	$snmp_ret_value = $snmp_ret_value / 10;
       # Only perfom checks if $snmp_ret_value is not empty.
       # A value of "0" is OK, therefore check for an empty string.
       if ($snmp_ret_value ne "") {
           # Have we broken a threshold?
           if ((($critical_high_load != -1) &&
                ($snmp_ret_value > $critical_high_load)) ||
               (($critical_low_load != -1) &&
                ($snmp_ret_value < $critical_low_load))) {
               status(2); # Critical
               $returnstr .= ($returnstr?", ":''). "Critical outgoing load:";
           } elsif ((($warning_high_load != -1) &&
                     ($snmp_ret_value > $warning_high_load)) ||
                    (($warning_low_load != -1) &&
                     ($snmp_ret_value < $warning_low_load))) {
               status(1); # Warning
               $returnstr .= ($returnstr?", ":''). "Warning outgoing load:";
           }

            #$returnstr .= ($returnstr?", ":''). "Outgoing load: ".sprintf("%.2f", $snmp_ret_value)." %";
            $returnstr .= ($returnstr?", ":''). "Outgoing load: $snmp_ret_value A";
        } else {
            status(2); # CRITICAL
            $returnstr .= ($returnstr?", ":''). "no data aviable";
        }
    }



# Usage information
sub usage {
    print << "USAGE";
    $0

        Check a APC's ATS\' system load via SNMP

Usage: $0 -H <hostname> -v <version> -f <phases> [-C <community>] [-w <load min>,<load max>] [-c <load min>,<load max>]

Options:
        -v  SNMP version supported by the ATS (default is $version)
        -H  Hostname or IP address of the APC ATS
        -C  SNMP read community (default is public)
        -w  Warning level min och max for system load
        -c  Critical level min och max for system load
USAGE
    exit_clean ('CRITICAL');
}