diff --git a/initrd/bin/nitropad-shutdown.sh b/initrd/bin/nitropad-shutdown.sh
deleted file mode 100755
index e449bc311..000000000
--- a/initrd/bin/nitropad-shutdown.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/ash
-
-# Method to access IT5570 IO Depth 2 registers
-it5570_i2ec() {
-  # TODO: Use /dev/port instead of iotools
-
-  # Address high byte
-  iotools io_write8 0x2e 0x2e
-  iotools io_write8 0x2f 0x11
-  iotools io_write8 0x2e 0x2f
-  iotools io_write8 0x2f $(($2>>8 & 0xff))
-
-  # Address low byte
-  iotools io_write8 0x2e 0x2e
-  iotools io_write8 0x2f 0x10
-  iotools io_write8 0x2e 0x2f
-  iotools io_write8 0x2f $(($2 & 0xff))
-
-  # Data
-  iotools io_write8 0x2e 0x2e
-  iotools io_write8 0x2f 0x12
-  iotools io_write8 0x2e 0x2f
-
-  case $1 in
-    "r")
-      iotools io_read8 0x2f
-      ;;
-    "w")
-      iotools io_write8 0x2f "$3"
-      ;;
-  esac
-}
-
-# shut down using EC external watchdog reset
-it5570_i2ec w 0x1f01 0x20
-it5570_i2ec w 0x1f07 0x01
diff --git a/initrd/bin/poweroff b/initrd/bin/poweroff
index a27da23b8..ef4bdf863 100755
--- a/initrd/bin/poweroff
+++ b/initrd/bin/poweroff
@@ -8,11 +8,6 @@ if [ "$CONFIG_TPM" = "y" ]; then
 	tpmr shutdown
 fi
 
-# Run special EC-based poweroff for Nitropad-Nxx
-if [ "$CONFIG_BOARD" = "nitropad-nv41" ] || [ "$CONFIG_BOARD" = "nitropad-ns50" ]; then
-	/bin/nitropad-shutdown.sh
-fi
-
 # Sync all mounted filesystems
 echo s > /proc/sysrq-trigger
 
diff --git a/initrd/bin/reboot b/initrd/bin/reboot
index 26255f12c..358931e9c 100755
--- a/initrd/bin/reboot
+++ b/initrd/bin/reboot
@@ -17,11 +17,6 @@ if [ "$CONFIG_TPM" = "y" ]; then
 	tpmr shutdown
 fi
 
-# Run special EC-based poweroff for Nitropad-Nxx
-if [ "$CONFIG_BOARD" = "nitropad-nv41" ] || [ "$CONFIG_BOARD" = "nitropad-ns50" ]; then
-    /bin/nitropad-shutdown.sh
-fi
-
 # Sync all mounted filesystems
 echo s > /proc/sysrq-trigger