/* This is an example startup file. You can load it from your startup file (to be found in Platform.userAppSupportDir +/+ "startup.scd") */
( s.reboot { // server options are only updated on reboot // configure the sound server: here you could add hardware specific options // see http://doc.sccode.org/Classes/ServerOptions.html s.options.numBuffers = 1024 * 256; // increase this if you need to load more samples s.options.memSize = 8192 * 32; // increase this if you get "alloc failed" messages s.options.numWireBufs = 64; // increase this if you get "exceeded number of interconnect buffers" messages s.options.maxNodes = 1024 * 32; // increase this if you are getting drop outs and the message "too many nodes" s.options.numOutputBusChannels = 2; // set this to your hardware output channel size, if necessary s.options.numInputBusChannels = 2; // set this to your hardware output channel size, if necessary // boot the server and start SuperDirt s.waitForBoot { ~dirt = SuperDirt(2, s); // two output channels, increase if you want to pan across more channels ~dirt.loadSoundFiles; // load samples (path containing a wildcard can be passed in) ~dirt.loadSoundFiles("/samples-extra/"); ~dirt.loadSoundFiles("/samples/"); // s.sync; // optionally: wait for samples to be read ~dirt.start(57120, 0 ! 12); // start listening on port 57120, create two busses each sending audio to channel 0
// optional, needed for convenient access from sclang:
(
~d1 = ~dirt.orbits[0]; ~d2 = ~dirt.orbits[1]; ~d3 = ~dirt.orbits[2];
~d4 = ~dirt.orbits[3]; ~d5 = ~dirt.orbits[4]; ~d6 = ~dirt.orbits[5];
~d7 = ~dirt.orbits[6]; ~d8 = ~dirt.orbits[7]; ~d9 = ~dirt.orbits[8];
~d10 = ~dirt.orbits[9]; ~d11 = ~dirt.orbits[10]; ~d12 = ~dirt.orbits[11];
);
MIDIClient.init( outports: 4 );
~dirt.soundLibrary.addMIDI(\midi0, MIDIOut(0));
~dirt.soundLibrary.addMIDI(\midi1, MIDIOut(1));
~dirt.soundLibrary.addMIDI(\midi2, MIDIOut(2));
~dirt.soundLibrary.addMIDI(\midi3, MIDIOut(3));
};
s.latency = 0.3; // increase this if you get "late" messages
}; );