Skip to content

Latest commit

 

History

History
240 lines (176 loc) · 9.71 KB

README.md

File metadata and controls

240 lines (176 loc) · 9.71 KB
Raw

Welcome to the SIG Windows Development Environment!

This is a fully batteries-included development environment for Windows on Kubernetes, including:

  • Vagrant file for launching a two-node cluster
  • containerd 1.6.15
  • Support for two CNIs: antrea, or calico on containerd: configure your CNI option in variables.yml
    • Calico 3.25.0 on containerd runs containers out of the box
    • Antrea 0.13.2 runs but requires running with a patch for antrea-io/antrea#2344 which was recently made available
  • NetworkPolicy support for Windows and Linux provided by Antrea and Calico
  • Windows binaries for kube-proxy.exe and kubelet.exe that are either built from source (K8s main branch) or releases
  • Kubeadm installation that can put the latest Linux control plane in place

Quick Start

Prerequisites

  • Linux host - Fedora 38.
    • Experimental support for Windows host with WSL as environment providing make, see Windows with WSL.
  • make
  • Vagrant
  • VirtualBox (we only have VirtualBox automated here, but these recipes have been used with others, like Microsoft HyperV and VMware Fusion).
  • Kubectl

Getting a cluster up and running

Simple steps to a Windows Kubernetes cluster, from scratch, built from source...

  • vagrant plugin install vagrant-reload vagrant-vbguest winrm winrm-elevated, vagrant-reload needed to easily reboot windows VMs during setup of containers features.
  • make all, this will create the entire cluster for you. To compile k/k/ from local source, see instructions later in this doc.
    • If the above failed, run vagrant provision winw1, just in case you have a flake during windows installation.
  • vagrant ssh controlplane and run kubectl get nodes to see your running dual-os linux+windows k8s cluster.

Windows with WSL (experimental)

All the above Quick Start steps apply, except you have to run the Makefile targets in WSL

  • using vagrant.exe on the host
  • while inside clone of this repo on Windows filesystem, not WSL filesystem.

First, get the path for your vagrant.exe on the host use Get-Command vagrant in PowerShell like the following example.

~ > $(get-command vagrant).Source.Replace("\","/").Replace("C:/", "/mnt/c/")
/mnt/c/HashiCorp/Vagrant/bin/vagrant.exe

Next, pass the mount path to the executable on the Windows host with the VAGRANT environment variable exported in WSL.

Then, ensure you clone this repository onto filesystem inside /mnt and not the WSL filesystem, in order to avoid failures similar to this one:

The host path of the shared folder is not supported from WSL.
Host path of the shared folder must be located on a file system with
DrvFs type. Host path: ./sync/shared

Finally, steps to a Windows Kubernetes cluster on Windows host in WSL is turn into the following sequence:

export VAGRANT=/mnt/c/HashiCorp/Vagrant/bin/vagrant.exe
cd /mnt/c/Users/joe
git clone https://github.com/kubernetes-sigs/sig-windows-dev-tools.git
make all
# ...
make clean

Fedora

Follow the steps presented below to prepare the Linux host environment and create the two-node cluster:

1. Install essential tools for build and vagrant/virtualbox packages.

Example:

Adding hashicorp repo for most recent vagrant bits:

sudo dnf install -y dnf-plugins-core
sudo dnf config-manager --add-repo https://rpm.releases.hashicorp.com/fedora/hashicorp.repo
sudo dnf -y install vagrant

Installing packages:

sudo dnf install -y vagrant VirtualBox
sudo vagrant plugin install vagrant-reload vagrant-vbguest winrm winrm-elevated vagrant-ssh

2. Create /etc/vbox/networks.conf to set the network bits:

Example:

sudo mkdir /etc/vbox
sudo vi /etc/vbox/networks.conf

* 10.0.0.0/8 192.168.0.0/16
* 2001::/64

3. Clone the repo and build

If you are building Kubernetes components from source, please follow the development guide.

git clone https://github.com/kubernetes-sigs/sig-windows-dev-tools.git
cd sig-windows-dev-tools
touch tools/sync/shared/kubejoin.ps1
make all

4. ssh to the virtual machines

  • Control Plane node (Linux):
vagrant ssh controlplane
kubectl get pods -A
  • Windows node:
vagrant ssh winw1

Goal

Our goal is to make Windows ridiculously easy to contribute to, play with, and learn about for anyone interested in using or contributing to the ongoing Kubernetes-on-Windows story. Windows is rapidly becoming an increasingly viable alternative to Linux thanks to the recent introduction of Windows HostProcess containers and Windows support for NetworkPolicies + Containerd integration.

Lets run it!

Ok let's get started...

1) Pre-Flight checks...

For the happy path, just:

  1. Start Docker so that you can build K8s from source as needed.
  2. Install Vagrant, and then vagrant-reload
vagrant plugin install vagrant-reload vagrant-vbguest winrm winrm-elevated
  1. Modify CPU/memory in the variables.yml file. We recommend four cores 8G+ for your Windows node if you can spare it, and two cores 8G for your Linux node as well.

2) Run it!

There are two use cases for these Windows K8s dev environments: Quick testing, and testing K8s from source.

3) Testing from source? make all

To test from source, run vagrant destroy --force ; make all. This will

  • destroy your existing dev environment (destroying the existent one, and removing binaries folder)
  • clone down K8s from GitHub. If you have the k/k repo locally, you can make path=path_to_k/k all
  • compile the K8s proxy and kubelet (for linux and windows)
  • inject them into the Linux and Windows vagrant environment at the /usr/bin and C:/k/bin/ location
  • start up the Linux and Windows VMs

AND THAT'S IT! Your machines should come up in a few minutes...

NOTE: Do not run the middle Makefile targets, they depend of the sequence to give the full cluster experience.

IMPORTANT

Do not log into the VMs until the provisioning is done. That is especially true for Windows because it will prevent the reboots.

Other notes

If you still have an old instance of these VMs running for the same dir:

vagrant destroy -f && vagrant up

after everything is done (can take 10 min+), ssh' into the Linux VM:

vagrant ssh controlplane

and get an overview of the nodes:

kubectl get nodes

The Windows node might stay 'NotReady' for a while, because it takes some time to download the Flannel image.

vagrant@controlplane:~$ kubectl get nodes
NAME     STATUS     ROLES                  AGE    VERSION
controlplane    Ready      control-plane,controlplane   8m4s   v1.20.4
winw1           NotReady   <none>                       64s    v1.20.4

...

NAME     STATUS   ROLES                  AGE     VERSION
controlplane    Ready    control-plane,controlplane     16m     v1.20.4
winw1           Ready    <none>                         9m11s   v1.20.4

Accessing the Windows box

You'll obviously want to run commands on the Windows box. The easiest way is to SSH into the Windows machine and use powershell from there:

vagrant ssh winw1
C:\ > powershell

Optionally, you can do this by noting the IP address during vagrant provision and running any RDP client (vagrant/vagrant for username/password, works for SSH). To run a command on the Windows boxes without actually using the UI, you can use winrm, which is integrated into Vagrant. For example, you can run:

vagrant winrm winw1 --shell=powershell --command="ls"

IF you want to debug on the windows node, you can also run crictl:

.\crictl config --set runtime-endpoint=npipe:////./pipe/containerd-containerd

Where we derived these recipes from

Contributing

Working on Windows Kubernetes is a great way to learn about Kubernetes internals and how Kubernetes works in a multi-OS environment.

So, even if you aren't a Windows user, we encourage Kubernetes users of all types to try to get involved and contribute!

We are a new project and we need help with...

  • contributing / testing recipes on different Vagrant providers
  • docs of existing workflows
  • CSI support and testing
  • privileged container support
  • recipes with active directory
  • any other ideas!

If nothing else, filing an issue with your bugs or experiences will be helpful long-term. If interested in pairing with us to do your first contribution, just reach out in #sig-windows (https://slack.k8s.io/). We understand that developing on Kubernetes with Windows is new to many folks, and we're here to help you get started.