Home

Lawndon Lite Wiki

Materials Needed

• 2X 5010 Brushless Motor 360KV 2-6S
• 2X 30A MulBrushless ESCs
• 3X 14.8V 4S LiPo batteries
  • Additional batteries may be necessary depending on the recyclable mower
• 2X 8mm diameter hardened steel linear bearing rod, 400mm long ea
• 4X 4mm Steel Rods (gearbox axles)
  • 100mm and 90mm
• 12X F694zz Flanged Ball Bearings (4mm11mm4mm)
• 503 Music Wire .055 X 36IN
  • 100mm segments, segments per track depend on mower length
  • 8 pieces of 36” wire total
• 4X M3*12mm 304 stainless steel Hex Hexagon Socket Cap Head Self-tapping Screw
• 4X M3*16mm 304 stainless steel Hex Hexagon Socket Cap Head Self-tapping Screw
• 16X 2287 skateboard bearings
• 8X M3X8mm Flat head
• 8X M3X18mm Flat head screws
• 16X M3X25mm screws
• 4X M4 Lock Nuts (optional)
• 4X M8 Lock Nuts (optional)
• 4-5kg PLA

Printer Settings

• 0.8mm Nozzle
• 2 line wall thickness
• 0.35mm or 0.4mm layer height
• 40-55% infill for the stuff that needs to be strong like tracks, gears, and gear housing. 15-20% for everything else.