Skip to content

jonatmudd/Intsy

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

93 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Intsy

32/64/128 channel bioamplifier system, now with accelerometer and on-board SD data logging capability for ambulatory applications! Photos of the original 32/64 channel device are below Also, check out the quick overview of the device internals of the 128 channel ambulatory system in this video (big props to Riwaj Shrestha, Suyash Mathema, and Jeremy Wharton!).

Intsy is a new low-cost, open-source, wireless-enabled bioamplifier system. The system can be configured for 32, 64, or 128 channel operation. It has been validated for gastrointesinal slow wave recordings and surface EMG. Full details are provided in our published peer-reviewed article in Physiological Measurement.

Data can be streamed either wirelessly via bluetooth or in wired configuration over USB. A LabView interface allows for real-time visualization and saving to hard disk for off-line analysis. Data rates of 32 chan x 110 Hz can be stably transmitted over bluetooth. The USB wired configuration can achieve up to 2 kHz x 128 chan.

The name Intsy comes from the two core components: Intan RHD2132 bioamplifier chip + Teensy 3.6 microcontroller.

Please see "Intsy_Setup_Guide.pdf" for detailed instructions on how to set up the Intsy system. Assembly time is typically about 2-4 hrs. Total cost is about $1500 for the 32 channel system, $2400 for the 64 channel system, and $4800 for the 128 channel system (the dominant cost being the Intan RHD2132 amplifier boards). That means in just half a day you can build your very own high-quality, low-cost, portable bioamplifier system!

All feedback and suggestions are warmly welcomed.

Above: Intsy hardware architecture and device (32/64 channel original module circa Dec 2017)

Above: Screenshot of Intsy Labview front end to visualize and stream signals in real time.

Disclaimer

The Intsy electronics module is not a medical device nor is it intended for medical diagnosis and provided to you "as is," and we make no express or implied warranties whatsoever with respect to its functionality, operability, or use, including, without limitation, any implied warranties, fitness for a particular purpose, or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility of such damages. This bioamplifier module does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives

About

32/64 channel bioamplifier system

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published