Skip to content

Latest commit

 

History

History
66 lines (46 loc) · 2.61 KB

README.md

File metadata and controls

66 lines (46 loc) · 2.61 KB
Raw

Introduction

Arduino program to control equipments via the protocol SOMFY RTS or Chacon DiO.

This code has been tested on ESP8266 with the very simple electronic components:

History

The code is based on the reverse engineering described in https://pushstack.wordpress.com/somfy-rts-protocol/.

The original code is https://github.com/Nickduino/Somfy_Remote.

There are many forks of this code on internet such as https://github.com/marmotton/Somfy_Remote or https://github.com/RoyOltmans/somfy_esp8266_remote_arduino that describes the required electronic parts.

https://www.amazon.fr/gp/product/B00G23NW6S

Many web sites describe the Chacon DIO protocol (https://caron.ws/diy-cartes-microcontroleurs/piloter-vos-prises-chacon-rf433mhz-arduino/).

This version is based on TOST Corp. code (2018 to 2020).

Modified by Stéphane Raimbault, 11/2020

  • MQTT Discovery for easy integration with Home Assistant
  • a cover can be associated to many groups
  • groups are exposed as remotes in Home Assistant
  • simpler configuration (no rolling code, EEPROM addresses, etc)
  • no dynamic allocation in loop() to avoid memory fragmentation
  • faster code (remove many delays, fast path, pointers, pure string management, early return in functions)
  • removed useless Ticker
  • comments in english
  • remove code to publish setup on weird server
  • remove publishing of every handled commands on MQTT box topic
  • DRY on many parts of the code
  • common hostname/MQTT ID/MQTT topic for the box generated from MAC address

License

License CC BY NC SA. https://creativecommons.org/licenses/by-nc-sa/4.0/

Compilation and upload in ESP8266

Copy the file config-default.h to config.h and edit it for your settings.

In the Arduino IDE:

In the menu Tools > Board > Boards manager, you must install the board ESP8266 [version 2.4.1 to have the board WeMos D1 R2 & mini] Don't use the last version 2.7.4!

Select the board WeMos D1 R2 & mini ou LOLIN (WEMOS) D1 R2 & mini. Select the Port and speed 115200 bauds of the serial monitor.

How to pair a SOMFY cover

After downloading the code in your box:

  1. Press the PROG button on the remote control of one of the your equipment, the shutter will make a back and forth movement up/down
  2. Send a "p" message to the MQTT server with the corresponding topic to the equipment
  3. Send a "u", "d" or "s" message to raise, lower or stop the shutter.

The rolling code value is stored in the EEPROM, so that you don't loose count of your rolling code after a power off or reset.