IF-MIB.yang

/*
 * This YANG module has been generated by smidump 0.5.0:
 *
 *      smidump -f yang IF-MIB
 *
 * Do not edit. Edit the source file instead!
 */

module IF-MIB {

  namespace "urn:ietf:params:xml:ns:yang:smiv2:IF-MIB";
  prefix "if-mib";

  import IANAifType-MIB {
    prefix "ianaiftype-mib";
  }

  import SNMPv2-TC {
    prefix "snmpv2-tc";
  }

  import ietf-yang-smiv2 {
    prefix "smiv2";
  }

  import ietf-yang-types {
    prefix "yang";
  }

  organization
   "IETF Interfaces MIB Working Group";

  contact
   "   Keith McCloghrie
    Cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, CA  95134-1706
    US
    
    408-526-5260
    kzm@cisco.com";

  description
   "The MIB module to describe generic objects for network
    interface sub-layers.  This MIB is an updated version of
    MIB-II's ifTable, and incorporates the extensions defined in
    RFC 1229.";

  revision 2000-06-14 {
    description
     "Clarifications agreed upon by the Interfaces MIB WG, and
      published as RFC 2863.";
  }

  revision 1996-02-28 {
    description
     "Revisions made by the Interfaces MIB WG, and published in
      RFC 2233.";
  }

  revision 1993-11-08 {
    description
     "Initial revision, published as part of RFC 1573.";
  }

  typedef OwnerString {
    type string {
      length "0..255";
    }
    status deprecated;
    description
     "This data type is used to model an administratively
      assigned name of the owner of a resource.  This information
      is taken from the NVT ASCII character set.  It is suggested
      that this name contain one or more of the following: ASCII
      form of the manager station's transport address, management
      station name (e.g., domain name), network management
      personnel's name, location, or phone number.  In some cases
      the agent itself will be the owner of an entry.  In these
      cases, this string shall be set to a string starting with
      'agent'.";
    smiv2:display-hint "255a";
  }

  typedef InterfaceIndex {
    type int32 {
      range "1..2147483647";
    }
    description
     "A unique value, greater than zero, for each interface or
      interface sub-layer in the managed system.  It is
      recommended that values are assigned contiguously starting
      from 1.  The value for each interface sub-layer must remain
      constant at least from one re-initialization of the entity's
      network management system to the next re-initialization.";
    smiv2:display-hint "d";
  }

  typedef InterfaceIndexOrZero {
    type int32 {
      range "0..2147483647";
    }
    description
     "This textual convention is an extension of the
      InterfaceIndex convention.  The latter defines a greater
      than zero value used to identify an interface or interface
      sub-layer in the managed system.  This extension permits the
      additional value of zero.  the value zero is object-specific
      and must therefore be defined as part of the description of
      any object which uses this syntax.  Examples of the usage of
      zero might include situations where interface was unknown,
      or when none or all interfaces need to be referenced.";
    smiv2:display-hint "d";
  }


  container IF-MIB {
    config false;

    container interfaces {
      smiv2:oid "1.3.6.1.2.1.2";

      leaf ifNumber {
        type int32;
        description
         "The number of network interfaces (regardless of their
          current state) present on this system.";
        smiv2:max-access "read-only";
        smiv2:oid "1.3.6.1.2.1.2.1";
      }
    }

    container ifMIBObjects {
      smiv2:oid "1.3.6.1.2.1.31.1";

      leaf ifTableLastChange {
        type yang:timeticks;
        description
         "The value of sysUpTime at the time of the last creation or
          deletion of an entry in the ifTable.  If the number of
          entries has been unchanged since the last re-initialization
          of the local network management subsystem, then this object
          contains a zero value.";
        smiv2:max-access "read-only";
        smiv2:oid "1.3.6.1.2.1.31.1.5";
      }

      leaf ifStackLastChange {
        type yang:timeticks;
        description
         "The value of sysUpTime at the time of the last change of
          the (whole) interface stack.  A change of the interface
          stack is defined to be any creation, deletion, or change in
          value of any instance of ifStackStatus.  If the interface
          stack has been unchanged since the last re-initialization of
          the local network management subsystem, then this object
          contains a zero value.";
        smiv2:max-access "read-only";
        smiv2:oid "1.3.6.1.2.1.31.1.6";
      }
    }

    container ifTable {
      description
       "A list of interface entries.  The number of entries is
        given by the value of ifNumber.";
      smiv2:oid "1.3.6.1.2.1.2.2";

      list ifEntry {
        key "ifIndex";
        description
         "An entry containing management information applicable to a
          particular interface.";
        smiv2:oid "1.3.6.1.2.1.2.2.1";

        leaf ifIndex {
          type if-mib:InterfaceIndex;
          description
           "A unique value, greater than zero, for each interface.  It
            is recommended that values are assigned contiguously
            starting from 1.  The value for each interface sub-layer
            must remain constant at least from one re-initialization of
            the entity's network management system to the next re-
            initialization.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.1";
        }

        leaf ifDescr {
          type snmpv2-tc:DisplayString {
            length "0..255";
          }
          description
           "A textual string containing information about the
            interface.  This string should include the name of the
            manufacturer, the product name and the version of the
            interface hardware/software.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.2";
        }

        leaf ifType {
          type ianaiftype-mib:IANAifType;
          description
           "The type of interface.  Additional values for ifType are
            assigned by the Internet Assigned Numbers Authority (IANA),
            through updating the syntax of the IANAifType textual
            convention.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.3";
        }

        leaf ifMtu {
          type int32;
          description
           "The size of the largest packet which can be sent/received
            on the interface, specified in octets.  For interfaces that
            are used for transmitting network datagrams, this is the
            size of the largest network datagram that can be sent on the
            interface.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.4";
        }

        leaf ifSpeed {
          type yang:gauge32;
          description
           "An estimate of the interface's current bandwidth in bits
            per second.  For interfaces which do not vary in bandwidth
            or for those where no accurate estimation can be made, this
            object should contain the nominal bandwidth.  If the
            bandwidth of the interface is greater than the maximum value
            reportable by this object then this object should report its
            maximum value (4,294,967,295) and ifHighSpeed must be used
            to report the interace's speed.  For a sub-layer which has
            no concept of bandwidth, this object should be zero.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.5";
        }

        leaf ifPhysAddress {
          type yang:phys-address;
          description
           "The interface's address at its protocol sub-layer.  For
            example, for an 802.x interface, this object normally
            contains a MAC address.  The interface's media-specific MIB
            must define the bit and byte ordering and the format of the
            value of this object.  For interfaces which do not have such
            an address (e.g., a serial line), this object should contain
            an octet string of zero length.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.6";
        }

        leaf ifAdminStatus {
          type enumeration {
            enum "up" {
              value "1";
            }
            enum "down" {
              value "2";
            }
            enum "testing" {
              value "3";
            }
          }
          description
           "The desired state of the interface.  The testing(3) state
            indicates that no operational packets can be passed.  When a
            managed system initializes, all interfaces start with
            ifAdminStatus in the down(2) state.  As a result of either
            explicit management action or per configuration information
            retained by the managed system, ifAdminStatus is then
            changed to either the up(1) or testing(3) states (or remains
            in the down(2) state).";
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.2.2.1.7";
        }

        leaf ifOperStatus {
          type enumeration {
            enum "up" {
              value "1";
            }
            enum "down" {
              value "2";
            }
            enum "testing" {
              value "3";
            }
            enum "unknown" {
              value "4";
            }
            enum "dormant" {
              value "5";
            }
            enum "notPresent" {
              value "6";
            }
            enum "lowerLayerDown" {
              value "7";
            }
          }
          description
           "The current operational state of the interface.  The
            testing(3) state indicates that no operational packets can
            be passed.  If ifAdminStatus is down(2) then ifOperStatus
            should be down(2).  If ifAdminStatus is changed to up(1)
            then ifOperStatus should change to up(1) if the interface is
            ready to transmit and receive network traffic; it should
            change to dormant(5) if the interface is waiting for
            external actions (such as a serial line waiting for an
            incoming connection); it should remain in the down(2) state
            if and only if there is a fault that prevents it from going
            to the up(1) state; it should remain in the notPresent(6)
            state if the interface has missing (typically, hardware)
            components.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.8";
        }

        leaf ifLastChange {
          type yang:timeticks;
          description
           "The value of sysUpTime at the time the interface entered
            its current operational state.  If the current state was
            entered prior to the last re-initialization of the local
            network management subsystem, then this object contains a
            zero value.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.9";
        }

        leaf ifInOctets {
          type yang:counter32;
          description
           "The total number of octets received on the interface,
            including framing characters.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.10";
        }

        leaf ifInUcastPkts {
          type yang:counter32;
          description
           "The number of packets, delivered by this sub-layer to a
            higher (sub-)layer, which were not addressed to a multicast
            or broadcast address at this sub-layer.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.11";
        }

        leaf ifInNUcastPkts {
          type yang:counter32;
          status deprecated;
          description
           "The number of packets, delivered by this sub-layer to a
            higher (sub-)layer, which were addressed to a multicast or
            broadcast address at this sub-layer.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.
            
            This object is deprecated in favour of ifInMulticastPkts and
            ifInBroadcastPkts.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.12";
        }

        leaf ifInDiscards {
          type yang:counter32;
          description
           "The number of inbound packets which were chosen to be
            discarded even though no errors had been detected to prevent
            their being deliverable to a higher-layer protocol.  One
            possible reason for discarding such a packet could be to
            free up buffer space.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.13";
        }

        leaf ifInErrors {
          type yang:counter32;
          description
           "For packet-oriented interfaces, the number of inbound
            packets that contained errors preventing them from being
            deliverable to a higher-layer protocol.  For character-
            oriented or fixed-length interfaces, the number of inbound
            transmission units that contained errors preventing them
            from being deliverable to a higher-layer protocol.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.14";
        }

        leaf ifInUnknownProtos {
          type yang:counter32;
          description
           "For packet-oriented interfaces, the number of packets
            received via the interface which were discarded because of
            an unknown or unsupported protocol.  For character-oriented
            or fixed-length interfaces that support protocol
            multiplexing the number of transmission units received via
            the interface which were discarded because of an unknown or
            unsupported protocol.  For any interface that does not
            support protocol multiplexing, this counter will always be
            0.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.15";
        }

        leaf ifOutOctets {
          type yang:counter32;
          description
           "The total number of octets transmitted out of the
            interface, including framing characters.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.16";
        }

        leaf ifOutUcastPkts {
          type yang:counter32;
          description
           "The total number of packets that higher-level protocols
            requested be transmitted, and which were not addressed to a
            multicast or broadcast address at this sub-layer, including
            those that were discarded or not sent.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.17";
        }

        leaf ifOutNUcastPkts {
          type yang:counter32;
          status deprecated;
          description
           "The total number of packets that higher-level protocols
            requested be transmitted, and which were addressed to a
            multicast or broadcast address at this sub-layer, including
            those that were discarded or not sent.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.
            
            This object is deprecated in favour of ifOutMulticastPkts
            and ifOutBroadcastPkts.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.18";
        }

        leaf ifOutDiscards {
          type yang:counter32;
          description
           "The number of outbound packets which were chosen to be
            discarded even though no errors had been detected to prevent
            their being transmitted.  One possible reason for discarding
            such a packet could be to free up buffer space.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.19";
        }

        leaf ifOutErrors {
          type yang:counter32;
          description
           "For packet-oriented interfaces, the number of outbound
            packets that could not be transmitted because of errors.
            For character-oriented or fixed-length interfaces, the
            number of outbound transmission units that could not be
            transmitted because of errors.
            
            Discontinuities in the value of this counter can occur at
            re-initialization of the management system, and at other
            times as indicated by the value of
            ifCounterDiscontinuityTime.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.20";
        }

        leaf ifOutQLen {
          type yang:gauge32;
          status deprecated;
          description
           "The length of the output packet queue (in packets).";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.21";
        }

        leaf ifSpecific {
          type yang:object-identifier-128;
          status deprecated;
          description
           "A reference to MIB definitions specific to the particular
            media being used to realize the interface.  It is
            recommended that this value point to an instance of a MIB
            object in the media-specific MIB, i.e., that this object
            have the semantics associated with the InstancePointer
            textual convention defined in RFC 2579.  In fact, it is
            recommended that the media-specific MIB specify what value
            ifSpecific should/can take for values of ifType.  If no MIB
            definitions specific to the particular media are available,
            the value should be set to the OBJECT IDENTIFIER { 0 0 }.";
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.2.2.1.22";
        }
      }
    }

    container ifStackTable {
      description
       "The table containing information on the relationships
        between the multiple sub-layers of network interfaces.  In
        particular, it contains information on which sub-layers run
        'on top of' which other sub-layers, where each sub-layer
        corresponds to a conceptual row in the ifTable.  For
        example, when the sub-layer with ifIndex value x runs over
        the sub-layer with ifIndex value y, then this table
        contains:
        
          ifStackStatus.x.y=active
        
        For each ifIndex value, I, which identifies an active
        interface, there are always at least two instantiated rows
        in this table associated with I.  For one of these rows, I
        is the value of ifStackHigherLayer; for the other, I is the
        value of ifStackLowerLayer.  (If I is not involved in
        multiplexing, then these are the only two rows associated
        with I.)
        
        For example, two rows exist even for an interface which has
        no others stacked on top or below it:
        
          ifStackStatus.0.x=active
          ifStackStatus.x.0=active ";
      smiv2:oid "1.3.6.1.2.1.31.1.2";

      list ifStackEntry {
        key "ifStackHigherLayer ifStackLowerLayer";
        description
         "Information on a particular relationship between two sub-
          layers, specifying that one sub-layer runs on 'top' of the
          other sub-layer.  Each sub-layer corresponds to a conceptual
          row in the ifTable.";
        smiv2:oid "1.3.6.1.2.1.31.1.2.1";

        leaf ifStackHigherLayer {
          type if-mib:InterfaceIndexOrZero;
          description
           "The value of ifIndex corresponding to the higher sub-layer
            of the relationship, i.e., the sub-layer which runs on 'top'
            of the sub-layer identified by the corresponding instance of
            ifStackLowerLayer.  If there is no higher sub-layer (below
            the internetwork layer), then this object has the value 0.";
          smiv2:max-access "not-accessible";
          smiv2:oid "1.3.6.1.2.1.31.1.2.1.1";
        }

        leaf ifStackLowerLayer {
          type if-mib:InterfaceIndexOrZero;
          description
           "The value of ifIndex corresponding to the lower sub-layer
            of the relationship, i.e., the sub-layer which runs 'below'
            the sub-layer identified by the corresponding instance of
            ifStackHigherLayer.  If there is no lower sub-layer, then
            this object has the value 0.";
          smiv2:max-access "not-accessible";
          smiv2:oid "1.3.6.1.2.1.31.1.2.1.2";
        }

        leaf ifStackStatus {
          type snmpv2-tc:RowStatus;
          description
           "The status of the relationship between two sub-layers.
            
            Changing the value of this object from 'active' to
            'notInService' or 'destroy' will likely have consequences up
            and down the interface stack.  Thus, write access to this
            object is likely to be inappropriate for some types of
            interfaces, and many implementations will choose not to
            support write-access for any type of interface.";
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.31.1.2.1.3";
        }
      }
    }

    container ifRcvAddressTable {
      description
       "This table contains an entry for each address (broadcast,
        multicast, or uni-cast) for which the system will receive
        packets/frames on a particular interface, except as follows:
        
        - for an interface operating in promiscuous mode, entries
        are only required for those addresses for which the system
        would receive frames were it not operating in promiscuous
        mode.
        
        - for 802.5 functional addresses, only one entry is
        required, for the address which has the functional address
        bit ANDed with the bit mask of all functional addresses for
        which the interface will accept frames.
        
        A system is normally able to use any unicast address which
        corresponds to an entry in this table as a source address.";
      smiv2:oid "1.3.6.1.2.1.31.1.4";

      list ifRcvAddressEntry {
        key "ifIndex ifRcvAddressAddress";
        description
         "A list of objects identifying an address for which the
          system will accept packets/frames on the particular
          interface identified by the index value ifIndex.";
        smiv2:oid "1.3.6.1.2.1.31.1.4.1";

        leaf ifIndex {
          type leafref {
            path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
          }
        }

        leaf ifRcvAddressAddress {
          type yang:phys-address;
          description
           "An address for which the system will accept packets/frames
            on this entry's interface.";
          smiv2:max-access "not-accessible";
          smiv2:oid "1.3.6.1.2.1.31.1.4.1.1";
        }

        leaf ifRcvAddressStatus {
          type snmpv2-tc:RowStatus;
          description
           "This object is used to create and delete rows in the
            ifRcvAddressTable.";
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.31.1.4.1.2";
        }

        leaf ifRcvAddressType {
          type enumeration {
            enum "other" {
              value "1";
            }
            enum "volatile" {
              value "2";
            }
            enum "nonVolatile" {
              value "3";
            }
          }
          description
           "This object has the value nonVolatile(3) for those entries
            in the table which are valid and will not be deleted by the
            next restart of the managed system.  Entries having the
            value volatile(2) are valid and exist, but have not been
            saved, so that will not exist after the next restart of the
            managed system.  Entries having the value other(1) are valid
            and exist but are not classified as to whether they will
            continue to exist after the next restart.";
          smiv2:defval "volatile";
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.31.1.4.1.3";
        }
      }
    }
  }

  smiv2:alias "ifXTable" {
    description
     "A list of interface entries.  The number of entries is
      given by the value of ifNumber.  This table contains
      additional objects for the interface table.";
    smiv2:oid "1.3.6.1.2.1.31.1.1";
  }

  smiv2:alias "ifXEntry" {
    description
     "An entry containing additional management information
      applicable to a particular interface.";
    smiv2:oid "1.3.6.1.2.1.31.1.1.1";
  }

  augment "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry" {
    description
     "An entry containing additional management information
      applicable to a particular interface.";
    smiv2:oid "1.3.6.1.2.1.31.1.1.1";

    leaf ifName {
      type snmpv2-tc:DisplayString;
      description
       "The textual name of the interface.  The value of this
        object should be the name of the interface as assigned by
        the local device and should be suitable for use in commands
        entered at the device's `console'.  This might be a text
        name, such as `le0' or a simple port number, such as `1',
        depending on the interface naming syntax of the device.  If
        several entries in the ifTable together represent a single
        interface as named by the device, then each will have the
        same value of ifName.  Note that for an agent which responds
        to SNMP queries concerning an interface on some other
        (proxied) device, then the value of ifName for such an
        interface is the proxied device's local name for it.
        
        If there is no local name, or this object is otherwise not
        applicable, then this object contains a zero-length string.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.1";
    }

    leaf ifInMulticastPkts {
      type yang:counter32;
      description
       "The number of packets, delivered by this sub-layer to a
        higher (sub-)layer, which were addressed to a multicast
        address at this sub-layer.  For a MAC layer protocol, this
        includes both Group and Functional addresses.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.2";
    }

    leaf ifInBroadcastPkts {
      type yang:counter32;
      description
       "The number of packets, delivered by this sub-layer to a
        higher (sub-)layer, which were addressed to a broadcast
        address at this sub-layer.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.3";
    }

    leaf ifOutMulticastPkts {
      type yang:counter32;
      description
       "The total number of packets that higher-level protocols
        requested be transmitted, and which were addressed to a
        multicast address at this sub-layer, including those that
        were discarded or not sent.  For a MAC layer protocol, this
        includes both Group and Functional addresses.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.4";
    }

    leaf ifOutBroadcastPkts {
      type yang:counter32;
      description
       "The total number of packets that higher-level protocols
        requested be transmitted, and which were addressed to a
        broadcast address at this sub-layer, including those that
        were discarded or not sent.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.5";
    }

    leaf ifHCInOctets {
      type yang:counter64;
      description
       "The total number of octets received on the interface,
        including framing characters.  This object is a 64-bit
        version of ifInOctets.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.6";
    }

    leaf ifHCInUcastPkts {
      type yang:counter64;
      description
       "The number of packets, delivered by this sub-layer to a
        higher (sub-)layer, which were not addressed to a multicast
        or broadcast address at this sub-layer.  This object is a
        64-bit version of ifInUcastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.7";
    }

    leaf ifHCInMulticastPkts {
      type yang:counter64;
      description
       "The number of packets, delivered by this sub-layer to a
        higher (sub-)layer, which were addressed to a multicast
        address at this sub-layer.  For a MAC layer protocol, this
        includes both Group and Functional addresses.  This object
        is a 64-bit version of ifInMulticastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.8";
    }

    leaf ifHCInBroadcastPkts {
      type yang:counter64;
      description
       "The number of packets, delivered by this sub-layer to a
        higher (sub-)layer, which were addressed to a broadcast
        address at this sub-layer.  This object is a 64-bit version
        of ifInBroadcastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.9";
    }

    leaf ifHCOutOctets {
      type yang:counter64;
      description
       "The total number of octets transmitted out of the
        interface, including framing characters.  This object is a
        64-bit version of ifOutOctets.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.10";
    }

    leaf ifHCOutUcastPkts {
      type yang:counter64;
      description
       "The total number of packets that higher-level protocols
        requested be transmitted, and which were not addressed to a
        multicast or broadcast address at this sub-layer, including
        those that were discarded or not sent.  This object is a
        64-bit version of ifOutUcastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.11";
    }

    leaf ifHCOutMulticastPkts {
      type yang:counter64;
      description
       "The total number of packets that higher-level protocols
        requested be transmitted, and which were addressed to a
        multicast address at this sub-layer, including those that
        were discarded or not sent.  For a MAC layer protocol, this
        includes both Group and Functional addresses.  This object
        is a 64-bit version of ifOutMulticastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.12";
    }

    leaf ifHCOutBroadcastPkts {
      type yang:counter64;
      description
       "The total number of packets that higher-level protocols
        requested be transmitted, and which were addressed to a
        broadcast address at this sub-layer, including those that
        were discarded or not sent.  This object is a 64-bit version
        of ifOutBroadcastPkts.
        
        Discontinuities in the value of this counter can occur at
        re-initialization of the management system, and at other
        times as indicated by the value of
        ifCounterDiscontinuityTime.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.13";
    }

    leaf ifLinkUpDownTrapEnable {
      type enumeration {
        enum "enabled" {
          value "1";
        }
        enum "disabled" {
          value "2";
        }
      }
      description
       "Indicates whether linkUp/linkDown traps should be generated
        for this interface.
        
        By default, this object should have the value enabled(1) for
        interfaces which do not operate on 'top' of any other
        interface (as defined in the ifStackTable), and disabled(2)
        otherwise.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.14";
    }

    leaf ifHighSpeed {
      type yang:gauge32;
      description
       "An estimate of the interface's current bandwidth in units
        of 1,000,000 bits per second.  If this object reports a
        value of `n' then the speed of the interface is somewhere in
        the range of `n-500,000' to `n+499,999'.  For interfaces
        which do not vary in bandwidth or for those where no
        accurate estimation can be made, this object should contain
        the nominal bandwidth.  For a sub-layer which has no concept
        of bandwidth, this object should be zero.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.15";
    }

    leaf ifPromiscuousMode {
      type boolean;
      description
       "This object has a value of false(2) if this interface only
        accepts packets/frames that are addressed to this station.
        This object has a value of true(1) when the station accepts
        all packets/frames transmitted on the media.  The value
        true(1) is only legal on certain types of media.  If legal,
        setting this object to a value of true(1) may require the
        interface to be reset before becoming effective.
        
        The value of ifPromiscuousMode does not affect the reception
        of broadcast and multicast packets/frames by the interface.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.16";
    }

    leaf ifConnectorPresent {
      type boolean;
      description
       "This object has the value 'true(1)' if the interface
        sublayer has a physical connector and the value 'false(2)'
        otherwise.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.17";
    }

    leaf ifAlias {
      type snmpv2-tc:DisplayString {
        length "0..64";
      }
      description
       "This object is an 'alias' name for the interface as
        specified by a network manager, and provides a non-volatile
        'handle' for the interface.
        
        On the first instantiation of an interface, the value of
        ifAlias associated with that interface is the zero-length
        string.  As and when a value is written into an instance of
        ifAlias through a network management set operation, then the
        agent must retain the supplied value in the ifAlias instance
        associated with the same interface for as long as that
        interface remains instantiated, including across all re-
        initializations/reboots of the network management system,
        including those which result in a change of the interface's
        ifIndex value.
        
        An example of the value which a network manager might store
        in this object for a WAN interface is the (Telco's) circuit
        number/identifier of the interface.
        
        Some agents may support write-access only for interfaces
        having particular values of ifType.  An agent which supports
        write access to this object is required to keep the value in
        non-volatile storage, but it may limit the length of new
        values depending on how much storage is already occupied by
        the current values for other interfaces.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.18";
    }

    leaf ifCounterDiscontinuityTime {
      type yang:timestamp;
      description
       "The value of sysUpTime on the most recent occasion at which
        any one or more of this interface's counters suffered a
        discontinuity.  The relevant counters are the specific
        instances associated with this interface of any Counter32 or
        Counter64 object contained in the ifTable or ifXTable.  If
        no such discontinuities have occurred since the last re-
        initialization of the local management subsystem, then this
        object contains a zero value.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.1.1.19";
    }
  }

  smiv2:alias "ifTestTable" {
    status deprecated;
    description
     "This table contains one entry per interface.  It defines
      objects which allow a network manager to instruct an agent
      to test an interface for various faults.  Tests for an
      interface are defined in the media-specific MIB for that
      interface.  After invoking a test, the object ifTestResult
      can be read to determine the outcome.  If an agent can not
      perform the test, ifTestResult is set to so indicate.  The
      object ifTestCode can be used to provide further test-
      specific or interface-specific (or even enterprise-specific)
      information concerning the outcome of the test.  Only one
      test can be in progress on each interface at any one time.
      If one test is in progress when another test is invoked, the
      second test is rejected.  Some agents may reject a test when
      a prior test is active on another interface.
      
      Before starting a test, a manager-station must first obtain
      'ownership' of the entry in the ifTestTable for the
      interface to be tested.  This is accomplished with the
      ifTestId and ifTestStatus objects as follows:
      
      try_again:
        get (ifTestId, ifTestStatus)
        while (ifTestStatus != notInUse)
            /*
             * Loop while a test is running or some other
             * manager is configuring a test.
             */
            short delay
            get (ifTestId, ifTestStatus)
        }
      
        /*
         * Is not being used right now -- let's compete
         * to see who gets it.
         */
        lock_value = ifTestId
      
        if ( set(ifTestId = lock_value, ifTestStatus = inUse,
                 ifTestOwner = 'my-IP-address') == FAILURE)
            /*
             * Another manager got the ifTestEntry -- go
             * try again
             */
            goto try_again;
      
        /*
         * I have the lock
         */
        set up any test parameters.
      
        /*
         * This starts the test
         */
        set(ifTestType = test_to_run);
      
        wait for test completion by polling ifTestResult
      
        when test completes, agent sets ifTestResult
             agent also sets ifTestStatus = 'notInUse'
      
        retrieve any additional test results, and ifTestId
      
        if (ifTestId == lock_value+1) results are valid
      
      A manager station first retrieves the value of the
      appropriate ifTestId and ifTestStatus objects, periodically
      repeating the retrieval if necessary, until the value of
      ifTestStatus is 'notInUse'.  The manager station then tries
      to set the same ifTestId object to the value it just
      retrieved, the same ifTestStatus object to 'inUse', and the
      corresponding ifTestOwner object to a value indicating
      itself.  If the set operation succeeds then the manager has
      obtained ownership of the ifTestEntry, and the value of the
      ifTestId object is incremented by the agent (per the
      semantics of TestAndIncr).  Failure of the set operation
      indicates that some other manager has obtained ownership of
      the ifTestEntry.
      
      Once ownership is obtained, any test parameters can be
      setup, and then the test is initiated by setting ifTestType.
      On completion of the test, the agent sets ifTestStatus to
      'notInUse'.  Once this occurs, the manager can retrieve the
      results.  In the (rare) event that the invocation of tests
      by two network managers were to overlap, then there would be
      a possibility that the first test's results might be
      overwritten by the second test's results prior to the first
      results being read.  This unlikely circumstance can be
      detected by a network manager retrieving ifTestId at the
      same time as retrieving the test results, and ensuring that
      the results are for the desired request.
      
      If ifTestType is not set within an abnormally long period of
      time after ownership is obtained, the agent should time-out
      the manager, and reset the value of the ifTestStatus object
      back to 'notInUse'.  It is suggested that this time-out
      period be 5 minutes.
      
      In general, a management station must not retransmit a
      request to invoke a test for which it does not receive a
      response; instead, it properly inspects an agent's MIB to
      determine if the invocation was successful.  Only if the
      invocation was unsuccessful, is the invocation request
      retransmitted.
      
      Some tests may require the interface to be taken off-line in
      order to execute them, or may even require the agent to
      reboot after completion of the test.  In these
      circumstances, communication with the management station
      invoking the test may be lost until after completion of the
      test.  An agent is not required to support such tests.
      However, if such tests are supported, then the agent should
      make every effort to transmit a response to the request
      which invoked the test prior to losing communication.  When
      the agent is restored to normal service, the results of the
      test are properly made available in the appropriate objects.
      Note that this requires that the ifIndex value assigned to
      an interface must be unchanged even if the test causes a
      reboot.  An agent must reject any test for which it cannot,
      perhaps due to resource constraints, make available at least
      the minimum amount of information after that test
      completes.";
    smiv2:oid "1.3.6.1.2.1.31.1.3";
  }

  smiv2:alias "ifTestEntry" {
    status deprecated;
    description
     "An entry containing objects for invoking tests on an
      interface.";
    smiv2:oid "1.3.6.1.2.1.31.1.3.1";
  }

  augment "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry" {
    status deprecated;
    description
     "An entry containing objects for invoking tests on an
      interface.";
    smiv2:oid "1.3.6.1.2.1.31.1.3.1";

    leaf ifTestId {
      type snmpv2-tc:TestAndIncr;
      status deprecated;
      description
       "This object identifies the current invocation of the
        interface's test.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.1";
    }

    leaf ifTestStatus {
      type enumeration {
        enum "notInUse" {
          value "1";
        }
        enum "inUse" {
          value "2";
        }
      }
      status deprecated;
      description
       "This object indicates whether or not some manager currently
        has the necessary 'ownership' required to invoke a test on
        this interface.  A write to this object is only successful
        when it changes its value from 'notInUse(1)' to 'inUse(2)'.
        After completion of a test, the agent resets the value back
        to 'notInUse(1)'.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.2";
    }

    leaf ifTestType {
      type snmpv2-tc:AutonomousType;
      status deprecated;
      description
       "A control variable used to start and stop operator-
        initiated interface tests.  Most OBJECT IDENTIFIER values
        assigned to tests are defined elsewhere, in association with
        specific types of interface.  However, this document assigns
        a value for a full-duplex loopback test, and defines the
        special meanings of the subject identifier:
        
            noTest  OBJECT IDENTIFIER ::= { 0 0 }
        
        When the value noTest is written to this object, no action
        is taken unless a test is in progress, in which case the
        test is aborted.  Writing any other value to this object is
        only valid when no test is currently in progress, in which
        case the indicated test is initiated.
        
        When read, this object always returns the most recent value
        that ifTestType was set to.  If it has not been set since
        the last initialization of the network management subsystem
        on the agent, a value of noTest is returned.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.3";
    }

    leaf ifTestResult {
      type enumeration {
        enum "none" {
          value "1";
        }
        enum "success" {
          value "2";
        }
        enum "inProgress" {
          value "3";
        }
        enum "notSupported" {
          value "4";
        }
        enum "unAbleToRun" {
          value "5";
        }
        enum "aborted" {
          value "6";
        }
        enum "failed" {
          value "7";
        }
      }
      status deprecated;
      description
       "This object contains the result of the most recently
        requested test, or the value none(1) if no tests have been
        requested since the last reset.  Note that this facility
        provides no provision for saving the results of one test
        when starting another, as could be required if used by
        multiple managers concurrently.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.4";
    }

    leaf ifTestCode {
      type yang:object-identifier-128;
      status deprecated;
      description
       "This object contains a code which contains more specific
        information on the test result, for example an error-code
        after a failed test.  Error codes and other values this
        object may take are specific to the type of interface and/or
        test.  The value may have the semantics of either the
        AutonomousType or InstancePointer textual conventions as
        defined in RFC 2579.  The identifier:
        
            testCodeUnknown  OBJECT IDENTIFIER ::= { 0 0 }
        
        is defined for use if no additional result code is
        available.";
      smiv2:max-access "read-only";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.5";
    }

    leaf ifTestOwner {
      type if-mib:OwnerString;
      status deprecated;
      description
       "The entity which currently has the 'ownership' required to
        invoke a test on this interface.";
      smiv2:max-access "read-write";
      smiv2:oid "1.3.6.1.2.1.31.1.3.1.6";
    }
  }

  notification linkDown {
    description
     "A linkDown trap signifies that the SNMP entity, acting in
      an agent role, has detected that the ifOperStatus object for
      one of its communication links is about to enter the down
      state from some other state (but not from the notPresent
      state).  This other state is indicated by the included value
      of ifOperStatus.";
    smiv2:oid "1.3.6.1.6.3.1.1.5.3";

    container object-1 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }
    }

    container object-2 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }

      leaf ifAdminStatus {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifAdminStatus";
        }
      }
    }

    container object-3 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }

      leaf ifOperStatus {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifOperStatus";
        }
      }
    }
  }

  notification linkUp {
    description
     "A linkUp trap signifies that the SNMP entity, acting in an
      agent role, has detected that the ifOperStatus object for
      one of its communication links left the down state and
      transitioned into some other state (but not into the
      notPresent state).  This other state is indicated by the
      included value of ifOperStatus.";
    smiv2:oid "1.3.6.1.6.3.1.1.5.4";

    container object-1 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }
    }

    container object-2 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }

      leaf ifAdminStatus {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifAdminStatus";
        }
      }
    }

    container object-3 {

      leaf ifIndex {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifIndex";
        }
      }

      leaf ifOperStatus {
        type leafref {
          path "/if-mib:IF-MIB/if-mib:ifTable/if-mib:ifEntry/if-mib:ifOperStatus";
        }
      }
    }
  }

  smiv2:alias "interfaces" {
    smiv2:oid "1.3.6.1.2.1.2";
  }

  smiv2:alias "ifMIB" {
    smiv2:oid "1.3.6.1.2.1.31";
  }

  smiv2:alias "ifMIBObjects" {
    smiv2:oid "1.3.6.1.2.1.31.1";
  }

  smiv2:alias "ifConformance" {
    smiv2:oid "1.3.6.1.2.1.31.2";
  }

  smiv2:alias "ifGroups" {
    smiv2:oid "1.3.6.1.2.1.31.2.1";
  }

  smiv2:alias "ifCompliances" {
    smiv2:oid "1.3.6.1.2.1.31.2.2";
  }

}