Problems encountered in using unpackFrame_ENV.py #488
Replies: 5 comments 11 replies
-
Hi! Did you figure out the solution to this issue? I encountered the same problem as yours, and am searching the discussion to find solutions. Appreciated! Frank |
Beta Was this translation helpful? Give feedback.
-
Nice work, thank you. |
Beta Was this translation helpful? Give feedback.
-
Ciao! I have the same problem...I solved it running stackStripMap without
--bbox
Vittorio
Il giorno dom 4 set 2022 alle ore 14:16 Huayun Zhou <
***@***.***> ha scritto:
… Nice work, thank you.
Thank you very much for your suggestion, but I encountered the following
problems in the run_file generated later. I wonder if you have encountered
them?
/$/run_files$ :./run_01_crop
Completed Parsing the Configuration file
Running: cropFrame
['--input', '/data/*/slc/20030403', '--box_str', '35.269 35.977 92.675
93.678', '--output', '/*/slc_crop/20030403']
This is the Open Source version of ISCE.
Some of the workflows depend on a separate licensed package.
To obtain the licensed package, please make a request for ISCE
through the website: https://download.jpl.nasa.gov/ops/request/index.cfm.
Alternatively, if you are a member, or can become a member of WinSAR
you may be able to obtain access to a version of the licensed sofware at
https://winsar.unavco.org/software/isce
Polynomial Order: 0 - by - 0
0
Line start: 2160.0
Line stop: 26827.0
Line limits: 2160 26827
Original Line Limits: 0 30333
Pixel start: -1030.0
Pixel stop: 5346.0
Pixel limits: 0 5195
Original Pixel Limits: 0 5195
Traceback (most recent call last):
File
"/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/stripmapWrapper.py",
line 155, in
main(args.start,args.end)
File
"/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/stripmapWrapper.py",
line 146, in main
cfgParser.runCmd()
File
"/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/stripmapWrapper.py",
line 51, in runCmd
func_modules.main(self.funcParams[section])
File
"/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/cropFrame.py",
line 289, in main
outFrame = cropFrame(frame, limits, inps.outdir, israw=inps.israw)
File
"/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/cropFrame.py",
line 208, in cropFrame
rng = np.linspace(xmin, xmax, len(coeff) + 1)
TypeError: object of type 'NoneType' has no len()
—
Reply to this email directly, view it on GitHub
<#488 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI5M46IKRJ6R6AG2OXN7MHLV4SHIXANCNFSM5VTRTWJA>
.
You are receiving this because you commented.Message ID:
***@***.***>
--
*Studio Geologia Applicata - Geomatica*
*Dr.Geol. Vittorio Bisaglia*
Albo dei Geologi del Veneto n° 468
Via Alessio, 19 – 35121 Padova (Italy)
C.F. BSG VTR 65D13 G224M - P.IVA 02700530286
mobile: +39 368 7217303 fax +39 049 660129
E-mail: ***@***.*** ***@***.***>
P.E.C.: ***@***.***
|
Beta Was this translation helpful? Give feedback.
-
Hy Carolina, after run es ... : (totoisce)
***@***.***:/media/vittorio/Elab_insar_B/isce/na_ba_envisat_asc_test$
unpackFrame_ENV.py -i
/media/vittorio/Elab_insar_B/isce/na_ba_envisat_asc_test/download/20090116
-o /media/vittorio/Elab_insar_B/isce/na_ba_envisat_asc_test/SLC/20090116
in SLC directory you must have 6 files...
then run stackStripMap.py without --bbox
Il giorno mar 27 set 2022 alle ore 23:50 Carolina Hurtado-Pulido <
***@***.***> ha scritto:
… Hello @vittorio3d <https://github.com/vittorio3d> I tried your solution
and think it works for me too. But, I am unsure about what results to
expect after running unpackFrame_ENV.py. I got three data files (.bak,
.dat, .dir), and a SLC file with a .vrt and a .XML file. Is only this what
I should get?
I am using the tool like this unpackFrame_ENV.py --input Images/ --output
SLC_DIR the Images folder has 35 images from EnviSAT. I did not get the
acquisition dates list or any other file - this causes an error in the
stackStripMap.py process.
Thanks for any help!
—
Reply to this email directly, view it on GitHub
<#488 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI5M46MTAXO24ZO32UYFLSTWANTYZANCNFSM5VTRTWJA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
*Studio Geologia Applicata - Geomatica*
*Dr.Geol. Vittorio Bisaglia*
Albo dei Geologi del Veneto n° 468
Via Alessio, 19 – 35121 Padova (Italy)
C.F. BSG VTR 65D13 G224M - P.IVA 02700530286
mobile: +39 368 7217303 fax +39 049 660129
E-mail: ***@***.*** ***@***.***>
P.E.C.: ***@***.***
|
Beta Was this translation helpful? Give feedback.
-
Right for all Carolina
inviato da mobile Dr.Geol.Vittorio Bisaglia Studio Geologia Applicata -
Geomatica
cell.: +39 3687217303
Il mer 28 set 2022, 19:05 Carolina Hurtado-Pulido ***@***.***>
ha scritto:
… Yes, I got 6 files, three are named as data, and the other three as
SLC_DIR. In your case the last three are named 20090116, right?
Should I run unpackFrame_ENV for each SAR image? and to this each image
must be in a separated folder?
Thanks again!
—
Reply to this email directly, view it on GitHub
<#488 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI5M46KYMRPEVF2MXPAUHO3WAR3GLANCNFSM5VTRTWJA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
hi,all
When I plan to use stackStripmap.py to process ENVISAT_SLC(*.N1) data, I encounter the following problems when using unpackFrame_ENV.py:
Traceback (most recent call last):
File "/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/unpackFrame_ENV.py", line 95, in
unpack(inps.h5dir, inps.slcdir)
File "/share/apps/anaconda3/envs/isce2022/lib/python3.9/site-packages/isce/components/contrib/stack/stripmapStack/unpackFrame_ENV.py", line 50, in unpack
pc = obj._dopplerCoeffs[::-1]
AttributeError: 'EnviSAT_SLC' object has no attribute '_dopplerCoeffs'
What may be the cause of this?
The orbit files come from here: https://earth.esa.int/eogateway/catalog/envisat-doris-precise-orbit-state-vectors-dor-vor_ax-
The instrument files come from here: https://earth.esa.int/eogateway/instruments/asar/auxiliary-data
Beta Was this translation helpful? Give feedback.
All reactions