No Temperature on Smokedetector

[Telefisch]

I installed the Stick and paired some smokedetectors but didn't get any temperature-property.

The type of sensor istn detected.
Only Notification Sensor is shown in the devicelist.
The stick is detected as shown below:
Z-Wave.Me | ZME_UZB1 USB Stick | Static PC Controller

It is ready (awake) but the dot of the adapter is shown yellow (not conneted with zwave)

[cburghardt]

If the adapter is yellow you need to check the logs for errors.
And in general we need more information (version of the adapter, logs, type of the device and so on)

[Telefisch]

Ok, the only message from zwave.0 is:

zwave.0 | 2020-02-06 09:44:37.416 | info | (3359) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"}]

State is: connected to host, alive, not connected to zwave
Adapter-Version is 1.7.3
Devices are:
Z-Wave.Me ZME_UZB1 USB Stick (This Information is shown in the adapterconig)
Fibaro Smoke Sensor FGSD-0002 EU (Only "Notification Sensor" is shown in the adapter)