Please add support for the TS0601 PIR sensor _TZE200_gjldowol

[tanelkoth]

The TS0601 motion sensor is currently not supported in the Zigbee adapter. This sensor is based on the ZM-35H-Q model, however the settings from this model do not work with this sensor. The fingerprint of this sensor is '_TZE200_gjldowol'.
Further info after pairing this device:

model: ZM-35H-Q
modelZigbee:TS0601
type:EndDevice
nwk:52291
manuf id:4417
manufacturer:_TZE200_gjldowol
power:Battery
app version:80
hard version:1
zcl version:3
stack version:1
date code:
interviewed:true
configured:false

endpoint:1
profile:260
input clusters:genBasic (0)
manuSpecificTuya (61184)
output clusters:genTime (10)
genOta (25)

Thanks for any help provided,
Regards,
erwin

[asgothian]

• Is this device listed as supported on zigbee2mqtt.io ?
• which adapter version did you test this ?

A.

[tanelkoth]

Hi, this is unclear to me. The model ( ZM-35H-Q) is supported on zigbee2mqtt.io, but the device itself apparently is not. I tried - with some cut and paste actions - to merge this device with the fingerprint _TZE200_gjldowol with the supported model, but this did not work. I used adapter version 1.10.3. Regards, erwin

…

------- ***@***.*** tel: 06-53355730

-------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 15:24 schreef asgothian ***@***.***>:

- Is this device listed as supported on zigbee2mqtt.io ? - which adapter version did you test this ? A. — Reply to this email directly, view it on GitHub <#2226 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BLULGJN7E2BVLEACE3IGDNDZZPX2JAVCNFSM6AAAAABPHPVSOOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBYGYZTQNZUGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[asgothian]

Please test with the current GitHub version (1.10.9)

A.

[tanelkoth]

Ok, but how do I do that? I always install the adapters from the adapter-tab within ioBroker and there is no upgrade available for the Zigbee adapter on this tab. Can I install it directly from GitHub? What must I do to achieve this? If you can let me know what to do I can test the newest adapter and let you know the result. I tried to find out myself what to do, but I have to admit that I do not understand what to do. Sorry to bother you with this. Thanks for your help, Regards, erwin

…

------- ***@***.*** tel: 06-53355730

-------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 17:17 schreef asgothian ***@***.***>:

Please test with the current GitHub version (1.10.9) A. — Reply to this email directly, view it on GitHub <#2226 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BLULGJJQVRMWD45F3BNV2X3ZZQFATAVCNFSM6AAAAABPHPVSOOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBYHE2DQMRWGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[tanelkoth]

I found this: iobroker update [repositoryUrl] and on GitHub I found this Url: https://github.com/ioBroker/ioBroker.zigbee.git Can I use this Url in the iobroker command to update the adapter? Thanks, erwin

…

------- ***@***.*** tel: 06-53355730

-------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 20:05 schreef Erwin Winkel ***@***.***>:

Ok, but how do I do that? I always install the adapters from the adapter-tab within ioBroker and there is no upgrade available for the Zigbee adapter on this tab. Can I install it directly from GitHub? What must I do to achieve this? If you can let me know what to do I can test the newest adapter and let you know the result. I tried to find out myself what to do, but I have to admit that I do not understand what to do. Sorry to bother you with this. Thanks for your help, Regards, erwin ------- ***@***.*** tel: 06-53355730 -------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 17:17 schreef asgothian ***@***.***>: > Please test with the current GitHub version (1.10.9) > > A. > > — > Reply to this email directly, view it on GitHub > <#2226 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/BLULGJJQVRMWD45F3BNV2X3ZZQFATAVCNFSM6AAAAABPHPVSOOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBYHE2DQMRWGY> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[asgothian]

You don't need a url. Set the iobroker interface to expert mode, then you can directly install from the official GitHub repo

[tanelkoth]

Ok. I tried and I got this result: [image: afbeelding.png] The latest version that was shown was 1.10.3 [image: afbeelding.png] I entered 1.10.9 manually and then I got the error. What did I do wrong? Regards, erwin

…

------- ***@***.*** tel: 06-53355730

-------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 20:21 schreef asgothian ***@***.***>:

You don't need a url. Set the iobroker interface to expert mode, then you can directly install from the official GitHub repo — Reply to this email directly, view it on GitHub <#2226 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BLULGJJ32UTNXED5LVSJRV3ZZQ2UHAVCNFSM6AAAAABPHPVSOOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBZGM4TGNJRGI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[asgothian]

I can't see the images

and you didn't use the "installieren aus eigener Url" part:

[tanelkoth]

Hello, thanks for the information. I didn't know about this option. It worked, see picture: [image: Knipsel.PNG] However, the action did not have the result I hoped for: The device is not recognized: [image: Knipsel1.PNG] And, the backside of the tile: [image: Knipsel2.PNG] The information about the device: [image: Knipsel3.PNG] Also there are some entries in the errorlog about the device: [image: Knipsel4.PNG] Is this helpful information for you? Thanks very much for your help so far. Regards, erwin

…

------- ***@***.*** tel: 06-53355730

-------------------------------------------------------------------------------------------------------------------------------------------- "Time flies like an arrow, fruit flies like a banana!" Op wo 2 okt 2024 om 21:44 schreef asgothian ***@***.***>:

I can't see the images and you didn't use the "installieren aus eigener Url" part: Screenshot.2024-10-02.at.21.43.31.png (view on web) <https://github.com/user-attachments/assets/8d0de51e-ca3a-4028-b6e0-fe1e0dedac37> — Reply to this email directly, view it on GitHub <#2226 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BLULGJMTZ7WKOIR7HMKR6RDZZREKXAVCNFSM6AAAAABPHPVSOOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBZGU2DINZYGQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[asgothian]

I am afraid you need to work on adding pictures. I see none in your post, so no information.

A.

[tanelkoth]

Hello,
I apologise for the inconvenience I caused. I am not familiar with this forum and I did not know how to use it properly. Sorry for that. I will try anew, hopefully with a better result.

picture:

However, the action did not have the result I hoped for:
The device is not recognized:

And, the backside of the tile:

The information about the device:

Also there are some entries in the errorlog about the device:

Is this helpful information for you?
Thanks very much for your help so far.
Regards,
erwin