Skip to content
This repository has been archived by the owner on Aug 5, 2022. It is now read-only.

Latest commit

 

History

History
217 lines (168 loc) · 9.27 KB

README.md

File metadata and controls

217 lines (168 loc) · 9.27 KB

Sensor APIs

This API is based on the W3C Generic Sensor API but adapted to constrained environments. It exposes interfaces to handle various sensor types.

This API takes interface definitions for the following objects from the W3C Generic Sensor API:

Web IDL for the Sensor API

The Web IDL of W3C Generic Sensor is extended as follows.

```javascript // The W3C Generic Sensor API object. [Constructor (optional SensorOptions options)] interface Sensor { readonly attribute SensorState state; readonly attribute SensorReading? reading = null; void start(); void stop();

attribute EventHandler onchange; attribute EventHandler onstatechange; attribute EventHandler onerror; };

dictionary SensorOptions { double? frequency; };

enum SensorState { "idle", "activating", "active", "errored" };

interface SensorReading { readonly attribute DOMHighResTimeStamp timeStamp;

// here come the properties added by various sensor data models };

[Constructor(DOMString type, SensorReadingEventInit eventInitDict)] interface SensorReadingEvent : Event { readonly attribute SensorReading reading; };

dictionary SensorReadingEventInit : EventInit { SensorReading reading; };


## Changes compared to the W3C specification

### Event handling
In order that client code would be run in the browser as well, as `EventTarget` may not be supported in constrained implementations, `EventHandler` is defined as a callback that takes an `Event` as argument.

```javascript
callback EventHandler = void (Event);

Therefore only attribution is possible with implementations of this API.

  var sensor = new TemperatureSensor();

  sensor.onstatechange = function(event) {
     // ...
   };

For sensors connected to a board, a controller may need to be specified. In addition, other properties may also associated with sensors.

In this API, sensors can be constructed using additional optional properties: sensor name, the name of the hardware controller or software driver, the board object, and a list of pin names and pin modes used on the board.

Otherwise, the sensor interfaces are the same. When board is not given to a constructor, it takes the default board selected by the underlying platform.

// Additional properties to W3C Generic Sensor object.
interface SensorExtension {
  readonly attribute String name;  // e.g. "bedroomLightSensor1"
  readonly attribute String controller;  // e.g. "ISL29035", or "Grove" etc.
  readonly attribute Board board;
  readonly attribute sequence<Pin> pins;  // list of connected pin names and modes
};

Sensor implements SensorExtension;

// Additional properties to W3C Generic SensorOptions.
dictionary SensorOptionsExtension {
  String name;
  Board board;
  String controller;
  sequence<Pin> pins;
};

SensorOptions implements SensorOptionsExtension;

Example

var iot = require("iot-sensors");
var temperature = null;
try {
  temperature1 = new TemperatureSensor({
      name: "livingRoomTemperature1",
      // board is default
      // by default implementation connects to I2C bus 0
      // implementation figures out the sensor driver
  });

  temperature2 = new TemperatureSensor({
      name: "bedRoomTemperature1",
      controller: "Grove",  // implementation takes hint for sensor driver
      pins: [{"i2c-3", "i2c-scl"}, {"i2c-2", "i2c-sdl"}];
      // board is default
  });

  temperature3 = new TemperatureSensor({
      name: "bedRoomTemperature1",
      pins: [{3, "analog-input"}];
      // board is default
      // implementation figures out the driver
  });
} catch(err) {
  console.log("Error adding temperature sensor: " + err.message);
}

console.log("Living room temperature [C]: " + temperature1.celsius);

Sensor data models

Various sensors may add properties to the reading property of Sensor, i.e. extend SensorReading.

The data model for Lightmeter

The reading property of the Lightmeter sensor object is a dictionary that contains a new property named illuminance that is a floating point number and represents the current light level (illuminance) measured in lux.

The data model for ProximitySensor

The reading property of the ProximitySensor object is a dictionary that contains the following properties:

Property Type Optional Default value Represents
distance double no undefined distance to object in cm
max double no undefined sensing range in cm
near boolean no undefined if object in proximity

The data model for Accelerometer

The reading property of the sensor object Accelerometer object is a dictionary that contains the following properties:

Property Type Optional Default value Represents
x double no undefined acceleration along the X axis
y double no undefined acceleration along the Y axis
z double no undefined acceleration along the Z axis

The sensor contains one more additional property named includesGravity of type boolean. If it is false, then the reading property stores linear acceleration values (that don't take into account gravity).

The data model for Gyroscope

The reading property of the Gyroscope sensor object is a dictionary that contains the following properties that represent the current angular velocity around the X, Y or Z axis, expressed in radians per second:

Property Type Optional Default value Represents
x double no 0 angular velocity along the X axis
y double no 0 angular velocity along the Y axis
z double no 0 angular velocity along the Z axis

The data model for Magnetometer

The reading property of the Magnetometer sensor object is a dictionary that contains the following properties that represent the geomagnetic field force around the X, Y or Z axis, expressed in microTesla units:

Property Type Optional Default value Represents
x double no 0 geomagnetic field along the X axis
y double no 0 geomagnetic field along the Y axis
z double no 0 geomagnetic field along the Z axis

The data model for geolocation

Work in progress.

The data model for TemperatureSensor

The reading property of the TemperatureSensor object is a dictionary that contains the following properties that represent the temperature given in Celsius, Kelvin, and Fahrenheit:

Property Type Optional Default value Represents
celsius double no 0 temperature in Celsius
fahrenheit double no 0 temperature in Fahrenheit
kelvin double no 0 temperature in Kelvin

Future additions

For enumerating sensors connected to the board, a new object is defined as the API entry point. On boards where hot-plug sensors are supported, events are emitted when sensors are added, and removed, respectively.

// Provided by 'require()'.
interface Sensors {
    // Enumerate all sensors or a given type of sensors connected to the board.
    // If a type was provided, the first in the list is the default sensor of that type.
    sequence<Sensor> sensors(optional SensorType sensorType);

    attribute EventHandler<Sensor> onsensorfound;
    attribute EventHandler<Sensor> onsensorlost;
};

Sensors implement EventEmitter;