Skip to content

Latest commit

 

History

History
158 lines (119 loc) · 10.4 KB

README.md

File metadata and controls

158 lines (119 loc) · 10.4 KB

FireFly Performance CLI

FireFly Performance CLI is a HTTP load testing tool that generates a constant request rate against a FireFly network and measure performance. This is used to confirm confidence that FireFly can perform under normal conditions for an extended period of time.

Items Subject to Testing

  • Broadcasts (POST /messages/broadcasts)
  • Private Messaging (POST /messages/private)
  • Mint Tokens (POST /tokens/mint)
    • Fungible vs. Non-Fungible Token Toggle
  • Blobs
  • Contract Invocation (POST /contracts/invoke)
    • Ethereum vs. Fabric

Build

The ffperf CLI needs building before you can use it.

Run make install in the root directory to build and install the ffperf command.

Run

The test configuration is structured around running ffperf as either a single process or in a distributed fashion as multiple processes.

The tool has 2 basic modes of operation:

  1. Run against a local FireFly stack
    • In this mode the ffperf tool loads information about the FireFly endpoint(s) to test by reading from a FireFly stack.json file on the local system. The location of the stack.json file is configured in the instances.yaml file by setting the stackJSONPath option.
  2. Run against a remote Firefly node
    • In this mode the ffperf tool connects to a FireFly instance running on a different system. Since there won't be a FireFly stack.json on the system where ffperf is running the nodes to test must be configured in the instances.yaml file by settings the Nodes option.

Local FireFly stack

See the Getting Started guide for help running tests against a local stack.

In the test configuration you define one or more test instances for a single ffperf process to run. An instance then describes running one or more test cases with a dedicated number of goroutine workers against a sender org and a recipient org. The test configuration consumes a file reference to the stack JSON configuration produced by the ff CLI (or can be defined manually) to understand the network topology, so that sender's and recipient's just refer to indices within the stack.

As a result, running the CLI consists of providing an instances.yaml file describe the test configuration and an instance index or name indicating which instance the process should run:

ffperf run -c /path/to/instances.yaml -i 0

See example-instances.yaml for examples of how to define multiple instances and multiple test cases per instance with all the various options.

Remote FireFly node

See the Getting Started with Remote Nodes guide for help running tests against a remote FireFly node.

In the test configuration you define one or more test instances for a single ffperf process to run. An instance then describes running one or more test cases with a dedicated number of goroutine workers. Instead of setting a sender org and recipient org (because there is no local FireFly stack.json to read) the instance must be configured to use a Node that has been defined in instances.yaml.

Currently the types of test that can be run against a remote node are limited to those that only invoke a single endpoint. This makes it most suitable for test types token_mint, custom_ethereum_contract and custom_fabric_contract since these don't need responses to be received from other members of the FireFly network.

To provide authentication when authenticating against a node endpoint, you can provide either of the following credentials in the instances.yaml under each node entry:

  • bearer token - set the access token as the authToken value
  • basic auth - set the username and password as the authUsername and authPassword values

authToken takes precedence over authUsername and authPassword values

As a result, running the CLI consists of providing an instances.yaml file describe the test configuration and an instance index or name indicating which instance the process should run:

ffperf run -c /path/to/instances.yaml -i 0

See example-remote-node-instances-fungible.yaml and example-remote-node-instances-nonfungible.yaml for examples of how to define nodes manually and configure test instances to use them.

Command line options

Executes a instance within a performance test suite to generate synthetic load across multiple FireFly nodes within a network

Usage:
  ffperf run [flags]

Flags:
  -c, --config string          Path to performance config that describes the network and test instances
  -d, --daemon                 Run in long-lived, daemon mode. Any provided test length is ignored.
      --delinquent string      Action to take when delinquent messages are detected. Valid options: [exit log] (default "exit")
  -h, --help                   help for run
  -i, --instance-idx int       Index of the instance within performance config to run against the network (default -1)
  -n, --instance-name string   Instance within performance config to run against the network
)

Metrics

The ffperf tool registers the following metrics for prometheus to consume:

  • ffperf_runner_received_events_total
  • ffperf_runner_incomplete_events_total
  • ffperf_runner_sent_mints_total
  • ffperf_runner_sent_mint_errors_total
  • ffperf_running_mint_token_balance (gauge)
  • ffperf_runner_deliquent_msgs_total
  • ffperf_runner_perf_test_duration_seconds

Useful features

The ffperf tool is designed to let you run various styles of test. The default behaviour for a local stack will exercise a local FireFly stack for 500 hours or until an error occurs. The prep.sh script will help you create and run this comprehensive test to validate a local installation of FireFly.

There are various options for creating your own customized tests. A full list of configuration options can be seen at conf.go but some useful options are outlined below:

  • Setting a maximum number of test actions
    • See maxActions attribute (defaults to 0 i.e. unlimited).
    • Once maxActions test actions (e.g. token mints) have taken place the test will shut down.
  • Ending the test when an error occurs
    • See delinquentAction attribute (defaults to exit).
    • A value of exit causes the test to end if an error occurs. Set to log to simply log the error and continue the test.
  • Set the maximum duration of the test
    • See length attribute.
    • Setting a test instance's length attribute to a time duration (e.g. 3h) will cause the test to run for that long or until an error occurs (see delinquentAction).
    • Note this setting is ignored if the test is run in daemon mode (running the ffperf command with -d or --daemon, or setting the global daemon value to true in the instances.yaml file). In daemon mode the test will run until maxActions has been reached or an error has occurred and delinquentActions is set to true.
  • Ramping up the rate of test actions (e.g. token mints)
    • See the startRate, endRate and rateRampUpTime attribute of a test instance.
    • All values default to 0 which has the effect of not limiting the rate of the test.
    • The test will allow at most startRate actions to happen per second. Over the period of rateRampUpTime seconds the allowed rate will increase linearly until endRate actions per seconds are reached. At this point the test will continue at endRate actions per second until the test finishes.
    • If startRate is the only value that is set, the test will run at that rate for the entire test.
  • Waiting for events to be confirmed before doing the next submission
    • See noWaitSubmission (defaults to false).
    • When set to true each worker routine will perform its action (e.g. minting a token) and wait for confirmation of that event before doing its next action.
    • maxSubmissionsPerSecond can be used to control the maximum number of submissions per second to avoid overloading the system under test.
  • Setting the features of a token being tested
    • See supportsData and supportsURI attributes of a test instance.
    • supportsData defaults to true since the sample token contract used by FireFly supports minting tokens with data. When set to true the message included in the mint transaction will include the ID of the worker routine and used to correlate received confirmation events.
    • supportsURI defaults to true for nonfungible tokens. This attribute is ignored for fungible token tests. If set to true the ID of a worker routine will be set in the URI and used to correlate received confirmation events.
    • If neither attribute is set to true any received confirmation events cannot be correlated with mint transactions. In this case the test behaves as if noWaitSubmission is set to true.
  • Enabling batching of events from the WebSocket connecting to FireFly. This will increase the amount of events per WebSocket message and increase the throughput of the tests
    • Under instances set
    subscriptionOptions:
       batch: true <- Enables Batching
       readAhead: 50 <-- How many events to get in a batch. i.e 50 events in one websocket message
       batchTimeout: 250ms <-- Timeout to wait for FireFly to send the next batch if it's not filled 
    
  • Waiting at the end of the test for the minted token balance of the mintRecipient address to equal the expected value. Since a test might be run several times with the same address the test gets the balance at the beginning of the test, and then again at the end. The difference is expected to equal the value of maxActions. To enable this check set the maxTokenBalanceWait token option the length of time to wait for the balance to be reached. If maxTokenBalanceWait is not set the test will not check balances.
  • Having a worker loop submit more than 1 action per loop by setting actionsPerLoop for the test. This can be helpful when you want to scale the number of actions done in parallel without having to scale the number of workers. The default value is 1 for this attribute. If setting to a value > 1 it is recommended to have noWaitSubmission to set false.

Distributed Deployment

See the ffperf Helm chart for running multiple instances of ffperf using Kubernetes.