driver.json

{
  "caps":
  {
    "informal": 1,
    "axes": 6,
    "usb_cdc": 1,
    "uart": 1,
    "spindle_pwm": 1,
    "spindle_dir": 1,
    "serial_ports": 2,
    "eeprom": 1,
    "ganged_axes": 1,
    "auto_square": 1,
    "digital_in": 3,
    "digital_out": 3,
    "probe": 1,
    "safety_door": 1,
    "mpg_mode": 1,
    "mcp3221_adc": 1,
    "pio_board": "due",
    "build_dir": "grblHAL_Due",
    "plugins": [
      { "id": "spindle" },
      { "id": "modbus" },
      { "id": "eeprom" },
      { "id": "keypad" },
      { "id": "macros" },
      { "id": "laser_cluster" },
      { "id": "laser_coolant" },
      { "id": "plasma" },
      { "id": "openpnp" },
      { "id": "bluetooth" }
    ]
  },
  "boards": [
    {
      "name": "cmcgrath v3",
      "symbol": "BOARD_CMCGRATH",
      "URL": "https://github.com/cmcgrath5035/G2core-DUE-External-Interfaces",
      "MAP": "grblHAL_Due/src/boards/cmcgrath_rev3_map.h",
      "caps": {
        "axes": 3,
        "digital_out": 3,
        "serial_ports": 1
      }
    },
    {
      "name": "Tinyg Due",
      "symbol": "BOARD_TINYG2_DUE",
      "URL": "https://github.com/synthetos/TinyG",
      "MAP": "grblHAL_Due/src/boards/tinyg2_due_map.h",
      "caps": {
        "axes": 6,
        "serial_ports": 1,
        "safety_door": 0,
        "spindle_dir": 0
      }
    },
    { "name": "Ramps 1.6",
      "symbol": "BOARD_RAMPS_16",
      "URL": "https://reprap.world/electronics/development_boards/radds_v1_6_pre_assembled_3d_printer_board/",
      "MAP": "grblHAL_Due/src/boards/ramps_1.6_map.h",
      "caps": {
        "axes": 5,
        "digital_in": 3,
        "digital_out": 3,
        "serial_ports": 1,
        "safety_door": 0
      }
    },
    { "name": "Ramps SMART",
      "symbol": "BOARD_RAMPS_SMART",
      "URL": "https://reprap.org/wiki/SMART_RAMPS",
      "MAP": "grblHAL_Due/src/boards/ramps_smart_map.h",
      "caps": {
        "axes": 5,
        "digital_in": 3,
        "digital_out": 3,
        "probe": 0,
        "safety_door": 0,
        "eeprom": 1,
        "serial_ports": 1
      }
    },
    { "name": "Mega 2560",
      "symbol": "BOARD_MEGA256",
      "URL": "",
      "MAP": "grblHAL_Due/src/boards/mega_2560_map.h",
      "caps": {
        "axes": 3,
        "serial_ports": 1
      }
    },
    { "name": "Protoneer v3",
      "symbol": "BOARD_PROTONEER",
      "URL": "https://blog.protoneer.co.nz/arduino-cnc-shield/",
      "MAP": "grblHAL_Due/src/boards/protoneer_3.xx_map.h",
      "caps": {
        "axes": 3,
        "serial_ports": 1
      }
    },
    { "name": "Radds 1.6",
      "symbol": "BOARD_RADDS_16",
      "URL": "",
      "MAP": "grblHAL_Due/src/boards/radds_1.6_map.h",
      "caps": {
        "axes": 5,
        "safety_door": 0,
        "spindle_dir": 0,
        "serial_ports": 1
      }
    }
  ]
}