Replies: 1 comment 9 replies
-
|
Can you add details, installing firmware is not typically a cause of a failure (with millions of GoPro firmware install per year.) What things did you do after the install? |
Beta Was this translation helpful? Give feedback.
-
|
What stock version were you installing when it failed? There are some older versions that you can't roll back to. |
Beta Was this translation helpful? Give feedback.
-
|
1.20 |
Beta Was this translation helpful? Give feedback.
-
|
after gopro labs, I wanted to set 1.20 but it didn't work out and the camera froze and didn't turn on anymore( |
Beta Was this translation helpful? Give feedback.
-
|
That version can no longer be installed, although I'm not aware of it bricking, I would have thought it just wouldn't install anymore. You might have to try regular support as I don't know what happens going from V1.5 to V1.2, this is completely independent of Labs. Something changed around V1.4x I think. I don't have any spare H10s to test this, but you can try this updated for H10 recovery (same procedure at H11, but different data) https://www.dropbox.com/scl/fi/2n8tlv35z3ts5xpbno2os/RecoveryHERO10v150.zip?rlkey=zlfxmirmwzk6phnccra8bc7zl&dl=1 |
Beta Was this translation helpful? Give feedback.
-
|
Unfortunately, nothing worked out, the camera starts blinking the front diode many times, then it just stays on or goes out (((((Thank you for your help, but it doesn't seem to be revived((( |
Beta Was this translation helpful? Give feedback.
-
Greetings forumchane, I have a 10 black camera, I flashed it in gopro Labs, used it everything was OK, but when I wanted to install the standard firmware, it hung and no longer works(Now it does not turn on, it only blinks with the front screen (It does not create folders on the flash card (How can I revive it? I'm asking for help.
Beta Was this translation helpful? Give feedback.
All reactions