Replies: 19 comments 17 replies
-
What commands? Some will cause that by design. I do not expect there is a bug. |
Beta Was this translation helpful? Give feedback.
-
Wake up when power |
Beta Was this translation helpful? Give feedback.
-
which commands ? |
Beta Was this translation helpful? Give feedback.
-
first time a had this problem was on June 4th then full reset working for about 20 flights now today problem came back... |
Beta Was this translation helpful? Give feedback.
-
Please share the actually command string, or QR Code that causes it. |
Beta Was this translation helpful? Give feedback.
-
Is it exactly one minute? |
Beta Was this translation helpful? Give feedback.
-
Also a metadata extraction using https://gopro.github.io/labs/control/metadata/ for one of the failed captures. |
Beta Was this translation helpful? Give feedback.
-
1 minute 4 seconds |
Beta Was this translation helpful? Give feedback.
-
DEVC |
Beta Was this translation helpful? Give feedback.
-
You haven't shared the command yet. As you have exposure max EXPX set at 60, WAKE=2, and display the ISO/Shutter on the FRNT display, guessing these are !M settings, not oM settings? While this aren't the cause either, all my naked cameras are configured similarly. So I guessing this is a naked config? Naked is more unreliable, do you have sufficient cooling? Also I'm surprised as an FPV user you aren't using BITR to increase the bitrate. While this might be counterintuitive !MBITR=150 might help. The bitrate hack includes some enhanced monitoring of the SD Card performance, so it might help. As this is not a bug in general, I moving this to discussions. |
Beta Was this translation helpful? Give feedback.
-
i don't have the command anymore because i reset and deinstalled qrcontrol. i will share when i can reproduce the problem aggain. |
Beta Was this translation helpful? Give feedback.
-
It happenend aggain. After many records without problems record stoppend after about 30 seconds... |
Beta Was this translation helpful? Give feedback.
-
QR Code Command |
Beta Was this translation helpful? Give feedback.
-
DEVC |
Beta Was this translation helpful? Give feedback.
-
2second test after Error: Front Display does not turn off after one minute anymore? |
Beta Was this translation helpful? Give feedback.
-
[2022-12-18 23:01:56] Boot command:!Lspl Or sometimes it get stucked when i want to stop recording see above. what does heartbeat timeout mean? |
Beta Was this translation helpful? Give feedback.
-
Nr 3 Record Stop after 15 seconds - with a different Sandisk Extreme Card v30 [2022-12-18 23:01:54] Labs:Main Start |
Beta Was this translation helpful? Give feedback.
-
DEVC |
Beta Was this translation helpful? Give feedback.
-
Coud it be related to !MFRNT=1!MEXPS=1 ? ISO Shutter text appears and disappear on front display like crazy when recording ? normal ? |
Beta Was this translation helpful? Give feedback.
-
[HERO11 Black]v2.10.70
QRControl 1.8.3
After updating my 2x Gopro 11 to Goprolabs 2.10.70 and using QRControl 1.8.3 i am getting a bug after several QRControl commands.
Then camera will stop record after 1 minute. The problem is with two cameras and different micro sd cards. Standard High Bitrate Setting.
When i make a Hard Reset on Gopro the bug is gone but will come back aggain after several QRControl commads ?
Beta Was this translation helpful? Give feedback.
All reactions